Physico-mechanical properties of glass fibre reinforced biophenolic elastomer composite
In this study oil palm empty fruit bunches (EFB) fibres was used to synthesize biophenolic resin (BPR) at a different formaldehyde/liquefied empty fruit bunches (F/LEFB) molar ratio which is 1.0, 1.5 and 2.0. The higher molar ratio of F/LEFB used has resulted in an increased of viscosity and solid c...
| Main Authors: | Zuhaili Zakaria, Sarani Zakaria, Rasidi Roslan, Chia, Chin Hua, Sharifah Nabihah Syed Jaafar, Umar Adli Amran, Gan, Sinyee |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Penerbit Universiti Kebangsaan Malaysia
2018
|
| Online Access: | http://journalarticle.ukm.my/12528/ http://journalarticle.ukm.my/12528/1/34%20Zuhaili%20Zakaria.pdf |
Similar Items
Physico-mechanical properties of glass fibre reinforced biophenolic elastomer composite
by: Zuhaili, Zakaria, et al.
Published: (2018)
by: Zuhaili, Zakaria, et al.
Published: (2018)
As-spun bio-novolac fibre morphological study based
on resin’s physico-chemical properties
by: Siti Noorul Aina Ab Rahim,, et al.
Published: (2017)
by: Siti Noorul Aina Ab Rahim,, et al.
Published: (2017)
As-spun Bio-novolac Fibre Morphological Study based on Resin’s Physico-chemical Properties
by: Siti Noorul Aina, Ab Rahim, et al.
Published: (2017)
by: Siti Noorul Aina, Ab Rahim, et al.
Published: (2017)
Bio-phenolic resin from oil palm empty fruit bunches
by: Zuhaili, Zakaria, et al.
Published: (2018)
by: Zuhaili, Zakaria, et al.
Published: (2018)
Characterization of residue from EFB and Kenaf Core Fibres in the liquefaction process
by: Sarani Zakaria,, et al.
Published: (2014)
by: Sarani Zakaria,, et al.
Published: (2014)
Polyols and rigid polyurethane foams derived from liquefied lignocellulosic and cellulosic biomass
by: Umar Adli, Amran, et al.
Published: (2019)
by: Umar Adli, Amran, et al.
Published: (2019)
Physico-mechanical properties of kenaf pulp cellulose
membrane cross-linked with glyoxal
by: Anis Syuhada Mohd Saidi,, et al.
Published: (2016)
by: Anis Syuhada Mohd Saidi,, et al.
Published: (2016)
Palm Industry Wastes: A Novel Source of Biophenols
by: Jamal, Parveen
Published: (2007)
by: Jamal, Parveen
Published: (2007)
Palm Industry Wastes: A Novel Source of Biophenols
by: Jamal, Parveen, et al.
Published: (2007)
by: Jamal, Parveen, et al.
Published: (2007)
Production of rigid polyurethane foams using polyol from liquefied oil palm biomass: Variation of isocyanate indexes
by: Umar Adli, Amran, et al.
Published: (2021)
by: Umar Adli, Amran, et al.
Published: (2021)
Pengoptimuman parameter bagi selulosa tandan kosong kelapa sawit (TKKS) teresterifikasi
by: Marhaini Mostapha,, et al.
Published: (2021)
by: Marhaini Mostapha,, et al.
Published: (2021)
Fractionation, identification and quantification of biophenols from oil palm fruit fiber
by: Jamal, Parveen, et al.
Published: (2011)
by: Jamal, Parveen, et al.
Published: (2011)
Physico-mechanical, chemical composition, thermal degradation and crystallinity of oil palm empty fruit bunch, kenaf and polypropylene fibres:
a comparatives study
by: Noor Intan Saffinaz Anuar,, et al.
Published: (2018)
by: Noor Intan Saffinaz Anuar,, et al.
Published: (2018)
Investigation of lightning damages in glass fibre-reinforced prepreg composites
by: Gan, Chia Sheng
Published: (2019)
by: Gan, Chia Sheng
Published: (2019)
Optimisation of chromatography condition for biophenols separation from oil palm fruit fiber
by: Jamal, Parveen, et al.
Published: (2011)
by: Jamal, Parveen, et al.
Published: (2011)
Role of nanofillers in elastomer- elastomer blends
by: Jeefferie, Abd Razak, et al.
Published: (2024)
by: Jeefferie, Abd Razak, et al.
Published: (2024)
Electrical breakdown and mechanical ageing in dielectric elastomers
by: Shamsul, Zakaria
Published: (2016)
by: Shamsul, Zakaria
Published: (2016)
Polymeric reaction between aldehyde group in furfural and phenolic derivatives from liquefaction of oil palm empty fruit bunch fiber as phenol-furfural resin
by: Mohamad Zulfahdli, Masli, et al.
Published: (2016)
by: Mohamad Zulfahdli, Masli, et al.
Published: (2016)
Development of reinforced thermoplastic elastomer with kenaf bast fibre for automotive component
by: Anuar, Hazleen, et al.
Published: (2010)
by: Anuar, Hazleen, et al.
Published: (2010)
Mechanical and physical properties of kenaf fibre reinforced thermoplastic elastomer composites
by: Lingenthiran, Samylingam
Published: (2015)
by: Lingenthiran, Samylingam
Published: (2015)
Effect of catalysts on the yield and properties of lignin form microwavedassisted acetosolve extraction of oil palm empty fruit bunch fibres.
by: Muhammad Nor, Arifin, et al.
Published: (2021)
by: Muhammad Nor, Arifin, et al.
Published: (2021)
Injection moulded lightweight kenaf fibre thermoplastic elastomer composite for automotive components
by: Anuar, Hazleen, et al.
Published: (2011)
by: Anuar, Hazleen, et al.
Published: (2011)
Improvement in mechanical properties of reinforced thermoplastic elastomer composite with kenaf bast fibre
by: Anuar, Hazleen, et al.
Published: (2011)
by: Anuar, Hazleen, et al.
Published: (2011)
Effect of catalysts on the yield and properties of lignin from microwave-assisted acetosolv extraction of oil palm empty fruit bunch fibres
by: Muhammad Nor Arifin, Yaakob, et al.
Published: (2021)
by: Muhammad Nor Arifin, Yaakob, et al.
Published: (2021)
Tribology Study on Elastomers
by: Hakami, Ferial
Published: (2018)
by: Hakami, Ferial
Published: (2018)
Electromechanical performances of dual system PDMS dielectric elastomer
by: Ahmad Farimin, Ahmad Osman, et al.
Published: (2022)
by: Ahmad Farimin, Ahmad Osman, et al.
Published: (2022)
Study on effect of toluene-acid treatments of recycled carbon black from waste tyres: physico-chemical analyses and adsorption performance
by: Nur Alia Sahira Azmi,, et al.
Published: (2023)
by: Nur Alia Sahira Azmi,, et al.
Published: (2023)
Bilayered polydimethylsiloxane (PDMS) composite for dielectric elastomer applications
by: Ahmad Farimin, Ahmad Osman, et al.
Published: (2022)
by: Ahmad Farimin, Ahmad Osman, et al.
Published: (2022)
Isolation and fractionation of cellulose nanocrystals from kenaf core
by: Hanisah Syed Sulaiman,, et al.
Published: (2015)
by: Hanisah Syed Sulaiman,, et al.
Published: (2015)
The Electrical Breakdown of Thin Dielectric Elastomers: Thermal Effects
by: Shamsul, Zakaria, et al.
Published: (2014)
by: Shamsul, Zakaria, et al.
Published: (2014)
Chemical and thermal properties of purified kenaf core
and oil palm empty fruit bunch lignin
by: Sharifah Nurul Ain Syed Hashim,, et al.
Published: (2016)
by: Sharifah Nurul Ain Syed Hashim,, et al.
Published: (2016)
Preparation And Characterisation Of Ethylene Vinyl Acetate/Natural Rubber/Mengkuang Leaf Fibre Thermoplastic Elastomer Composites
by: Faiezah, Hashim
Published: (2019)
by: Faiezah, Hashim
Published: (2019)
Preparation and characterization of Fe3O4/regenerated cellulose membrane
by: Hatika Kaco,, et al.
Published: (2017)
by: Hatika Kaco,, et al.
Published: (2017)
Membran selulosa kenaf terjana semula daripada larutan akues NaOH/urea yang digumpal menggunakan asid sulfurik
by: Nor Aziawati Azahari,, et al.
Published: (2017)
by: Nor Aziawati Azahari,, et al.
Published: (2017)
The effect of recycled thermoplastic elastomer(TPE) mixing ratio on the tensile strength of thermoplastic elastomer (TPE) polymer
by: Muhamad Ifrad, Ibrahim
Published: (2013)
by: Muhamad Ifrad, Ibrahim
Published: (2013)
Phosphate glass fibres and their composites
by: Hossain, Kazi M. Zakir, et al.
Published: (2016)
by: Hossain, Kazi M. Zakir, et al.
Published: (2016)
Manifestations of the Mullins effect in filled elastomers
by: Fernandes Arruebarrena, Vanessa Auxiliadora
Published: (2016)
by: Fernandes Arruebarrena, Vanessa Auxiliadora
Published: (2016)
Tensile properties of a hybrid kenaf-glass fibre composite shaft
by: Zakaria, N.A., et al.
Published: (2022)
by: Zakaria, N.A., et al.
Published: (2022)
Fibre wealth
by: Syed Othman, Sharifah Nabihah, et al.
Published: (2012)
by: Syed Othman, Sharifah Nabihah, et al.
Published: (2012)
Achieving high performance in silicone rubber dielectric elastomers via synergistic layer system
by: Ahmad Farimin, Ahmad Osman, et al.
Published: (2025)
by: Ahmad Farimin, Ahmad Osman, et al.
Published: (2025)
Similar Items
-
Physico-mechanical properties of glass fibre reinforced biophenolic elastomer composite
by: Zuhaili, Zakaria, et al.
Published: (2018) -
As-spun bio-novolac fibre morphological study based
on resin’s physico-chemical properties
by: Siti Noorul Aina Ab Rahim,, et al.
Published: (2017) -
As-spun Bio-novolac Fibre Morphological Study based on Resin’s Physico-chemical Properties
by: Siti Noorul Aina, Ab Rahim, et al.
Published: (2017) -
Bio-phenolic resin from oil palm empty fruit bunches
by: Zuhaili, Zakaria, et al.
Published: (2018) -
Characterization of residue from EFB and Kenaf Core Fibres in the liquefaction process
by: Sarani Zakaria,, et al.
Published: (2014)