Failure analysis and mechanical behaviors of metamaterials

QR Code

Failure analysis and mechanical behaviors of metamaterials

In recent years, mechanical metamaterials have been explored for their tunable nature with the continual development of Additive Manufacturing (AM) technologies. As a result, the failure mechanisms of the metamaterials and their mechanical behaviours under different boundary and environmental condit...

Full description

Bibliographic Details
Main Author:	Bhuwal, Akash Singh
Format:	Thesis (University of Nottingham only)
Language:	English
Published:	2023
Subjects:	Metamaterials; Additive manufacturing; Struts (Engineering); Axial loads; Failure analysis (Engineering)
Online Access:	https://eprints.nottingham.ac.uk/76178/

Similar Items

Analysis of defects in additively manufactured lattice structures
by: Echeta, Ifeanyichukwu
Published: (2023)

Highly sensitive metamaterial biosensor operating in the terahertz regime
by: Naeem, Nadeem
Published: (2016)

Vibration absorption performance of membrane-type metamaterial on a thin plate
by: Gao, Cong, et al.
Published: (2019)

Metamaterial fabrication using combined multiphoton polymerization and optical trapping
by: Askari, Meisam
Published: (2017)

Research on the structural vibration attenuation characteristics of locally resonant metamaterial
by: Gao, Cong
Published: (2020)

Integrated X-band miniaturized stack bandpass filtenna with metamaterial superstrate
by: Ramli, Azlinda
Published: (2019)

Metamaterial – based sensor for detection of biomolecules
by: Mat Rusni, Izyani
Published: (2017)

Prediction of bandgaps in membrane-type metamaterial attached to a thin plate
by: Gao, Cong, et al.
Published: (2019)

Examination of acoustic insulation of composite metamaterials with negative stiffness elements inclusions
by: Ampatzidis, Theofanis, et al.
Published: (2017)

Failure mechanism of foamed concrete made with/without additives and lightweight aggregate
by: Hilal, Ameer Abdulrahman, et al.
Published: (2016)

Modified strut-and-tie models for reinforced concrete deep beams with externally bonded CFRP systems
by: Hanoon, Ammar Nasiri
Published: (2017)

Structural behavior of strengthened interlocking load-bearing hollow block wall with opening subjected to axial and seismic loads
by: Choy, Wai Kent
Published: (2010)

Strut effectiveness factor for reinforced concrete deep beamsunder dynamic loading condition
by: Hanoon, Ammar Nasiri, et al.
Published: (2016)

Enhancement of wave damping within metamaterials having embedded negative stiffness inclusions
by: Chronopoulos, Dimitrios, et al.
Published: (2015)

Metamaterial rectenna based RF energy harvester
by: Olule, Lillian Joyce Among
Published: (2019)

Enhanced acoustic insulation properties of composite metamaterials having embedded negative stiffness inclusions
by: Chronopoulos, Dimitrios, et al.
Published: (2017)

Nonlinear Model for Lead Rubber Bearings Including Axial Load Effects and Large Deformations
by: Moussa, L., et al.
Published: (2014)

Origami metamaterial with two-stage programmable compressive strength under quasi-static loading
by: Li, Z., et al.
Published: (2021)

Study of bandgap property of a bilayer membrane-type metamaterial applied on a thin plate
by: GAO, Cong, et al.
Published: (2020)

Development of reliability-centered maintenance model using linguistic failure mode and effect analysis
by: Mohammed Ahmed Qaid, Alrifaey Moath
Published: (2019)

Perceived justice and consumer post service failure behaviour: the moderating role of failure severity, attachment styles, and brand authenticity
by: Randhir-Singh, Sarabjit Kaur
Published: (2021)

Explorative Investigation into the Drivers of Firm Failure
by: Loong, James Seng Wai
Published: (2007)

Investigating the use of two-photon polymerisation for the creation of gradient index optics
by: Woods, Emma
Published: (2022)

Axial eccentric SynRel and SPM Motors analytical models validation using 3D finite element
by: Mahmoud, Hanafy, et al.
Published: (2017)

Mechanical characterization of polymer parts produced via multi-jet printing and fused deposition modelling
by: Wahid, Zaliha
Published: (2021)

Design, analysis and fabrication of two axis motorized bench / Mohd Adlan Shamsuddin
by: Shamsuddin, Mohd Adlan
Published: (2010)

Interconnect materials enabling IGBT modules to achieve stable short circuit failure behavior
by: Li, Jianfeng, et al.
Published: (2017)

A Quantum Graph Approach to Metamaterial Design
by: Lawrie, Tristan
Published: (2025)

Failure Analysis Investigation on 2N7002LTI TMOS Device Due to Electrostatic Discharge (ESD) Failures
by: Abdul Manaf, Abdul Halim
Published: (1998)

A reinvestigation of the spring-mass model for metamaterial bandgap prediction
by: Vo, N.H., et al.
Published: (2022)

Mechanical design and dynamic performance characterisation for non-contact form measurement systems
by: Bointon, Patrick
Published: (2020)

Determining the failure level for risk analysis in an e-commerce interaction
by: Hussain, Omar, et al.
Published: (2008)

Localized single frequency lasing states in a finite parity-time symmetric resonator chain
by: Phang, Sendy, et al.
Published: (2016)

Reviewing the past to learn in the future: making sense of design errors and failures in construction
by: Love, Peter, et al.
Published: (2013)

Validity of an upper-body-mounted accelerometer to measure peak vertical and resultant force during running and change-of-direction tasks
by: Wundersitz, D., et al.
Published: (2013)

Mechanical, durability and microstructure properties of cold asphalt emulsion mixtures with different types of filler
by: Nassar, Ahmed I., et al.
Published: (2016)

Two typical phases of failure acceleration in rocks under uniaxial compression
by: Cheng, L., et al.
Published: (2024)

Assessing the capability of in-situ nondestructive analysis during layer based additive manufacture
by: Hirsch, Matthias, et al.
Published: (2016)

Compressive failure modes and energy absorption in additively manufactured double gyroid lattices
by: Maskery, Ian, et al.
Published: (2018)

A Methodology to ascertain the level of failure in an e-commerce interaction
by: Hussain, Omar, et al.
Published: (2007)