Refinement of the grain structure of selective laser melted Ti-6Al-4V via induction heat treatment

QR Code

Refinement of the grain structure of selective laser melted Ti-6Al-4V via induction heat treatment

Selective laser melting (SLM) has been shown to be an attractive manufacturing route for the production of α/β titanium alloys, and in particular Ti-6Al-4V. Post-process heat treatments are widely used to tune the microstructure and improve the mechanical properties of the as-built parts. However, c...

Full description

Bibliographic Details
Main Author:	Zou, Zhiyi
Format:	Thesis (University of Nottingham only)
Language:	English
Published:	2020
Subjects:	Three-dimensional printing; Titanium alloys; Titanium alloys Heat treatment; Induction heating
Online Access:	https://eprints.nottingham.ac.uk/61283/

Similar Items

Dispersion of grain refiner particles in molten aluminium
by: Asbjornsson, Einar Jon
Published: (2001)

In-situ boron-induced grain refinement and its impact on the metallurgical and mechanical properties of Ti6Al4V alloy processed by laser powder bed fusion
by: Hizli, Huseyin
Published: (2025)

Mechanical properties of Ti-6Al-4V selectively laser melted parts with body-centred-cubic lattices of varying cell size
by: Maskery, Ian, et al.
Published: (2015)

Machining of metal directed energy deposited components
by: Oyelola, Olusola
Published: (2020)

Laser cladding of Ti-6Al-4V with carbide and boride reinforcements using wire and powder feedstock
by: Farayibi, Peter Kayode
Published: (2014)

Effect of the build orientation on the mechanical properties and fracture modes of SLM Ti–6Al–4V
by: Simonelli, Marco, et al.
Published: (2014)

The growth of short fatigue cracks in titanium and aluminium alloys
by: Bolingbroke, Richard Kendall
Published: (1988)

The effect of fretting conditions on the lifetime of aero-engine dry film lubricants systems
by: Laolu-Balogun, Emmanuel
Published: (2023)

Abrasive water-jet: controlled depth milling of titanium alloys
by: Fowler, Gary
Published: (2003)

Self–sealing hot isostatic pressing–diffusion bonding of titanium for near net shape manufacture
by: Garcia Hernandez, Alfonso C.
Published: (2019)

Machining and Tool Wear Mechanisms during Machining Titanium Alloys
by: Islam, Mohammad Nazrul, et al.
Published: (2013)

Characterization and mechanical properties of in-situ titanium diboride fibre reinforced aluminium-copper alloy composites
by: Ramli, Rosmamuhamadani
Published: (2016)

The influence of shot peening on the fatigue response of Ti-6Al-4V surfaces subject to different machining processes
by: Xu, Zhengkai, et al.
Published: (2018)

Experimental and numerical investigations into the behaviour of a 7175-T7351 aluminium alloy for aerospace gearbox housing applications at elevated temperatures
by: Lam Wing Cheong, Marc F.
Published: (2018)

Heat treatment of cold-sprayed C355 Al for repair: microstructure and mechanical properties
by: Murray, J.W., et al.
Published: (2017)

Processing of open-cell structures by additive manufacturing technique of metal and salt mixtures
by: Zhao, Ge
Published: (2020)

Characterisation of the torsional behaviour of titanium metal matrix composite shafts
by: Lee, Yaw Chuan
Published: (2009)

Effect of cutting parameters on surface integrity in groove milling of Hastelloy-C276 using coated carbide end mills under dry and wet conditions
by: Abdulradha Al-Falahi, Muath Dheaa
Published: (2015)

The microstructure and mechanical properties of selectively laser melted AlSi10Mg: The effect of a conventional T6-like heat treatment
by: Aboulkhair, Nesma T., et al.
Published: (2016)

Improving the fatigue behaviour of a selectively laser melted aluminium alloy: influence of heat treatment and surface quality
by: Aboulkhair, Nesma T., et al.
Published: (2016)

Microstructural evolution in solution heat treatment of gas- atomised Al alloy (7075) powder for cold spray
by: Sabard, Alexandre, et al.
Published: (2017)

Simulation of LM6 alloy with Ti-B refinement in squeeze casting process
by: Mona Kiaee,
Published: (2015)

Development of printer nozzle for extruding synthetic biomaterials using fused deposition modeling process
by: Sukindar, Nor Aiman
Published: (2018)

Performance of Ti-6Al-4V by laser powder bed fusion: powder feedstock and heat treatment considerations
by: Du, Xi
Published: (2024)

Effect of stress relieving heat treatment on surface topography and dimensional accuracy of incrementally formed grade 1 titanium sheet parts
by: Behera, Amar Kumar, et al.
Published: (2016)

Properties of titanium carbide reinforced aluminium silicon alloy matrix
by: M. Sayuti,
Published: (2012)

Effect of cooling methods on dimensional accuracy and surface finish of a turned titanium part
by: Islam, Mohammad Nazrul, et al.
Published: (2013)

Nanoindentation shows uniform local mechanical properties across melt pools and layers produced by selective laser melting of AlSi10Mg alloy
by: Everitt, Nicola M, et al.
Published: (2016)

Polymeric Membrane Sensors for Detection of Cesium (I), Chromium (III) and Titanium (III) Ions Based on Calixarene Ionophores
by: Ahmadzadeh, Saeid
Published: (2011)

Optimization of micro-end milling process parameters of titanium alloy using non-dominated sorting genetic algorithm
by: Golshan, Abolfazl
Published: (2013)

Photocatalytic degradation of pesticides using TiO2 nanoparticles
by: Termtanun, Mutsee
Published: (2013)

Improved magnetic induction tomography
by: Turton, Logan James
Published: (2023)

Wear mechanism of TC4 titanium alloy with TiN coating against self-lubricating fabric
by: Zhao, Song, et al.
Published: (2023)

Determination Of Tin In Lead-Base, Copper-Base And Iron-Base Alloys By Spectrophotometry And Graphite Furnace Atomic Absorption Spectrophotometry
by: Jais, Umi Sibyan
Published: (1987)

Effect of heat treatment on optical, elastic and thermal properties of silica borotellurite glass doped with manganese
by: Ismail, Zaitizila
Published: (2019)

Characterization of shape and dimensional accuracy of incrementally formed titanium sheet parts
by: Behera, Amar Kumar, et al.
Published: (2015)

Design, synthesis, characterisation and optimisation for titanium complexes for anti-cancer activity
by: Musa, Mustapha
Published: (2023)

Polymeric Membrane Sensors for Detection of Titanium (III) Ions Based on Tripodal-or Calixarene-Ligand and Detection of Ohromium (VI) Using Metallo-Salen Ionophores
by: Rezayi, Majid
Published: (2011)

Photodegradation-Adsorption of Organic Dyes Using Immobilized Chitosan Supported Titanium Dioxide Photocatalyst
by: Lee, Kong Hui
Published: (2007)

Highly active TiO2-based photocatalaysts for indoor air remediation
by: Puddu, Valeria
Published: (2008)