Modelling droplet heat and mass transfer in aero-engine bearing chambers

QR Code

Modelling droplet heat and mass transfer in aero-engine bearing chambers

Bearings are critical elements of aero-engines because they support the axial and radial loads of the turbomachinery and allow the transfer of the engine thrust forces onto the airframe. The bearings are enclosed by a chamber to avoid oil leakages to other parts of the turbine. Inside bearing chambe...

Full description

Bibliographic Details
Main Author:	Gaviria Arcila, Dafne
Format:	Thesis (University of Nottingham only)
Language:	English
Published:	2020
Subjects:	Evaporation Droplets Bearing Chamber Heat and mass transfer oil aero-engine radiation VOF
Online Access:	https://eprints.nottingham.ac.uk/61053/

Similar Items

A coupled Lagrangian-Eulerian framework to model droplet to film interaction with heat transfer
by: Adeniyi, Akinola A.
Published: (2015)

Application of the volume of fluid method with heat transfer to a two-shaft aero-engine bearing chamber
by: Bristot, Andrea
Published: (2018)

Droplet impact dynamics on a spherical particle
by: Mitra, S., et al.
Published: (2013)

Oil droplet impact dynamics in aero-engine bearing chambers: correlations derived from direct numerical simulations
by: Peduto, D.
Published: (2015)

A coupled 1D film hydrodynamics and core gas flow model for air-oil flows in aero-engine bearing chambers
by: Kakimpa, Bruce, et al.
Published: (2017)

Investigation on thermal and kinetic dynamics of droplets
by: Li, Wang
Published: (2023)

Heat Transfer and Dynamics of Impinging Droplets on Hot Horizontal Surfaces
by: Utikar, Ranjeet, et al.
Published: (2010)

Experimental and computational investigation into oil shedding from an aeroengine ball bearing
by: Hee, Jee Loong
Published: (2020)

Application of a convolutional neural network (CNN) for droplet detection in an aeroengine bearing chamber
by: Farbrother, Katrina
Published: (2023)

Modelling of the interaction between a falling n-heptane droplet and hot solid surface
by: Gumulya, M., et al.
Published: (2014)

Characteristics of multimode heat transfer in a differentially-heated horizontal rectangular duct
by: Wangdhamkoom, Panitan
Published: (2007)

An experimental investigation into the spread and heat transfer dynamics of a train of two concentric impinging droplets over a heated surface
by: Guggilla, G., et al.
Published: (2020)

Investigation of external oil flow from a journal bearing in an epicyclic gearbox
by: Berthold, Martin
Published: (2021)

Development and application of a fully coupled eulerian thin film/discrete phase approach to a simplified aeroengine bearing chamber
by: Nicoli, Andrew
Published: (2020)

Vibration of viscoelastic sessile droplets
by: Bennett, Joe
Published: (2018)

An investigation into the aerospace industry with specific reference to the aero-engine sector and its electronic advancements
by: Gale, James William
Published: (2006)

Application of CFD to model an aeroengine internal gearbox
by: Turner, Adam James
Published: (2015)

Study of the impacts of droplets deposited from the gas core onto a gas-sheared liquid film
by: Cherdantsev, Andrey V., et al.
Published: (2016)

Diamagnetic Levitation of Bubbles and Droplets
by: Hunter-Brown, George
Published: (2023)

Optimizing the effect of various ethanol concentration as drying agent to the mechanical properties of oil palm lumber (elaeis guineensis) / Siti Fadhilah Rosli
by: Rosli, Siti Fadhilah
Published: (2017)

Continuum damage mechanics models and their applications to composite components of aero-engines
by: Yu, Tianhong
Published: (2016)

Study of aero-engine oil-air separators
by: Wang, Y., et al.
Published: (2006)

Machine learning-augmented turbulence models for the simulation of two-phase shear flows
by: Bertolotti, Luc
Published: (2022)

Health evaluation of captive Malayan sun bear (Helarctos malayanus Horsfield) in zoos in Peninsular Malaysia
by: Che' Amat, Azlan
Published: (2011)

Simulation of Heat and Mass Transfer of Cocoa Beans under Stepwise Drying Conditions in a Heat Pump Dryer
by: Hii, C., et al.
Published: (2013)

Effect of carburizing time on mechanical properties of fe-24mn steel / Muhammad Aqeel Rusdi
by: Rusdi, Muhammad Aqeel
Published: (2017)

Analysis of liquid–liquid droplets fission and encapsulation in single/two layer microfluidic devices fabricated by xurographic method
by: Lim, Chang Nong, et al.
Published: (2017)

Stability analysis on boundary layer flow and heat transfer over a permeable surface in presence of thermal radiation
by: Abu Bakar, Shahirah
Published: (2018)

Numerical analysis of heat transfer in cooling of fish packages
by: Abbas, Kassim Ali, et al.
Published: (2006)

A network model for capture of suspended particles and droplets in porous media
by: Gao, Changhong
Published: (2008)

The atomization current and droplet size of ethanol in two different small-scale electro-spraying systems
by: Gan, Yunhua, et al.
Published: (2017)

Effect of the surface morphology of solidified droplet on remelting between neighboring aluminum droplets
by: Yi, Hao, et al.
Published: (2018)

Modelling droplet motion and interfacial tension in filters collecting liquid aerosols
by: Mullins, Benjamin, et al.
Published: (2010)

A preliminary numerical investigation of airborne droplet dispersion in aircraft cabins
by: Bhatia, Dinesh, et al.
Published: (2020)

Novel design and development of PDMS-glass hybrid microfluidic devices for continuous double encapsulation of liquid-oil droplets
by: Lim, Chang Nong
Published: (2019)

Innovative shallow sump customizations for aero-engine bearing chambers
by: Chandra, Budi, et al.
Published: (2016)

Enhancing evaporative mass transfer and steam stripping using microwave heating
by: Ogunniran, Oluwatosin, et al.
Published: (2017)

X-Ray diffraction analysis of thermally evaporated copper tin selenide thin films at different annealing temperature.
by: Talib, Zainal Abidin, et al.
Published: (2010)

The effect of oil feed pressure on friction and cavitation in plain bearings
by: Mansoor, Yousuf Ali
Published: (2018)

Development of elastomeric bearing utilizing steel core with granular and polymer filler system for structures and bridges
by: Tan, Kar Chun
Published: (2022)