Bond behavior in NSM-strengthened masonry

QR Code

Bond behavior in NSM-strengthened masonry

Near Surface Mounted (NSM) reinforcement is an interesting technique for seismic strengthening of masonry and historical structures. Despite having several advantages compared to conventional techniques, little attention has been given to understanding the involved mechanisms (such as bond behavior)...

Full description

Bibliographic Details
Main Authors:	Maljaee, Hamid, Ghiassi, Bahman, Lourenço, Paulo B.
Format:	Article
Published:	Elsevier 2018
Subjects:	Near surface mounted ; Masonry ; Strengthening ; Bond ; FRP ; Experimental testing ; Analytical modeling
Online Access:	https://eprints.nottingham.ac.uk/51807/

Similar Items

Using data mining algorithms to predict the bond strength of NSM FRP systems in concrete
by: Coelho, Mário R.F., et al.
Published: (2016)

Textile reinforced mortars for masonry structures
by: Kariou, Florentia
Published: (2020)

Strengthening of existing reinforced concrete structures against progressive collapse
by: de Araújo Vieira, Andre
Published: (2020)

Fiber-to-mortar bond behavior in TRM composites: effect of embedded length and fiber configuration
by: Dalalbashi, Ali, et al.
Published: (2018)

Designing NSM FRP systems in concrete using partial safety factors
by: Coelho, Mário, et al.
Published: (2018)

Textile reinforced mortar to masonry bond under static and fatigue loading
by: Makashev, Kuanysh
Published: (2022)

Investigation of performance of carbon and glass fibre strengthened concrete beams with different end anchorages
by: Hiew, Kee Hon
Published: (2012)

Incorporation of surface mount technology manufacturing (chip mountung) to LED Chip on Board
by: Amirnudin, Saiful Nizal
Published: (2019)

Out-of-plane response of masonry walls strengthened using textile-mortar system
by: Kariou, F.A., et al.
Published: (2018)

Review of potential structural applications of hybrid fiber Engineered Cementitious Composites
by: Maalej, M., et al.
Published: (2012)

Development of Finite Element Code for Non-Linear Analysis of Interlocking Mortarless Masonry System
by: Ahmed Al- Wathaf, Ahmed Hasan
Published: (2006)

Fracture-based interface model for NSM FRP systems in concrete
by: Coelho, Mário, et al.
Published: (2016)

Waterborne debris impacts on masonry structures in extreme hydrodynamic events
by: De Iasio, Alessandro
Published: (2025)

A parametric study: Frame analysis method for masonry arch bridges
by: Debnath, Sujan, et al.
Published: (2012)

Bond between textile-reinforced mortar (TRM) and concrete substrates: experimental investigation
by: Raoof, Saad M., et al.
Published: (2016)

Towards a multiscale scheme for nonlinear dynamic analysis of masonry structures with damage
by: Triantafyllou, Savvas P., et al.
Published: (2015)

Performance of Masonry Blocks Incorporating Palm Oil Fuel Ash
by: Rahman, Muhammad, et al.
Published: (2014)

Assessment of bond between asphalt layers
by: Muslich, Sutanto
Published: (2010)

Minimization of copper dissolution for lead-free wave soldering in surface mount technology
by: Arunasalam, Mageswaran
Published: (2017)

The properties of the near surface layers at Naylor Field, Otway, Australia
by: Al-Jabri, Yousuf, et al.
Published: (2010)

Structural Behaviour Of Interlocking Hollow Block Concrete Wall With Subjected To Axial and Eccentric Loads
by: Mohamed, Labeed Ahmed
Published: (2008)

Response and Damage Level of Confined Masonry Walls to Blast
by: Li, C., et al.
Published: (2013)

Structural behavior of interlocking mortarless putra block wall system
by: Safiee, Nor Azizi
Published: (2011)

A performance evaluation of mainstream timber framed and traditional masonry housing in the UK
by: Bailey, David
Published: (2016)

Lightweight Masonry Block from Oil Palm Kernel Shell
by: Muntohar, A.S., et al.
Published: (2014)

Assessing the repeatability of reflection seismic data in the presence of complex near-surface conditions CO2CRC Otway Project, Victoria, Australia
by: Al-Jabri, Yousuf, et al.
Published: (2010)

New epoxy anchor for better bonding between FRP sheets and concrete
by: Yuan, C., et al.
Published: (2020)

Experimental and analytical study of flexural behaviour of BFRP sheets strengthened RC beams with new epoxy anchors
by: Yuan, C., et al.
Published: (2021)

Interfacial bond behaviour between hybrid carbon/basalt fibre composites and concrete under dynamic loading
by: Yuan, C., et al.
Published: (2020)

Experimental and numerical study on CFRP strip strengthened clay brick masonry walls subjected to vented gas explosions
by: Li, Zhan, et al.
Published: (2019)

Optimisation of calcium silicate and sand cement bricks in masonary bearing walls / Kartini Kamaruddin and Siti Hawa Hamzah
by: Kamaruddin, Kartini, et al.
Published: (2006)

Microwave characterization technique of mortar, concrete reinforcement wire mesh, and mortar filled with pvc tubes
by: Jawad, Mohammed Abdulkareem
Published: (2014)

Bond Strengths of Geopolymer and Cement Concretes
by: Sarker, Prabir
Published: (2010)

Tunnelling effects on capped piles and masonry buildings with shallow strip foundations
by: Tang, Chuanjin
Published: (2024)

A study on factors that effect bond price volatility in Malaysia bond market / Nur Hafsah Dan
by: Dan, Nur Hafsah
Published: (2011)

Capital structure and the issuance of corporate bonds in emerging Asia
by: Mizen, Paul, et al.
Published: (2014)

Influence of concrete strength on dynamic interfacial fracture behaviour between fibre reinforced polymer sheets and concrete
by: Yuan, C., et al.
Published: (2020)

Effect of High Frequency Heating Time on Glue Bond Quality in Laminated Rubberwood
by: Md. Tahir, Helmi
Published: (1991)

A novel method to produce kiss-bonds in composites components for NDI and characterisation purposes
by: Telford, R., et al.
Published: (2019)

A study on the macroeconomic variables that affects the price of Islamic bond (SUKUK) in Malaysian bond market / Siti Diana Atira Zulkifly
by: Zulkifly, Siti Diana Atira
Published: (2015)