$Evaluation of formability and fracture of pure titanium in incremental sheet forming$
QR Code

QR Code

Evaluation of formability and fracture of pure titanium in incremental sheet forming

A forming limit diagram (FLD) is commonly used as a useful means for characterizing the formability of sheet metal forming processes. In this study, the Nakajima test was used to construct the forming limit curve at necking (FLCN) and fracture (FLCF). The results of the FLCF are compared with increm...

Full description

Bibliographic Details
Main Authors:	Gatea, Shakir, Xu, Dongkai, Ou, Hengan, McCartney, Graham
Format:	Article
Published:	Springer 2017
Subjects:	Nakajima test ISF FLD Stress triaxiality GTN model
Online Access:	https://eprints.nottingham.ac.uk/47263/

Similar Items

Investigation of the effect of forming parameters in incremental sheet forming using a micromechanics based damage model
by: Gatea, Shakir, et al.
Published: (2018)

Modelling of ductile fracture in single point incremental forming using a modified GTN model
by: Gatea, Shakir, et al.
Published: (2017)

Review on the influence of process parameters in incremental sheet forming
by: Gatea, Shakir, et al.
Published: (2016)

Experimental and numerical investigation of formability and ductile fracture in incremental sheet forming
by: Gatea, Shakir Madhloom
Published: (2017)

Deformation and fracture characteristics of Al6092/SiC/17.5p metal matrix composite sheets due to heat treatments
by: Gatea, Shakir, et al.
Published: (2018)

Fracture characteristics of PEEK at various stress triaxialities
by: Chen, Fei, et al.
Published: (2016)

Experimental and numerical investigations of deformation and fracture mechanisms in double-sided incremental forming
by: Peng, Wenxuan
Published: (2022)

Characterization of shape and dimensional accuracy of incrementally formed titanium sheet parts
by: Behera, Amar Kumar, et al.
Published: (2015)

Evaluation of deformation stability and fracture mechanism in incremental sheet forming
by: Ai, S., et al.
Published: (2017)

Effect of stress relieving heat treatment on surface topography and dimensional accuracy of incrementally formed grade 1 titanium sheet parts
by: Behera, Amar Kumar, et al.
Published: (2016)

Characterization of shape and dimensional accuracy of incrementally formed titanium sheet parts with intermediate curvatures between two feature types
by: Behera, Amar Kumar, et al.
Published: (2016)

Titanium based cranial reconstruction using incremental sheet forming
by: Lu, B., et al.
Published: (2016)

Hot tensile fracture characteristics and constitutive modelling of polyether-ether-ketone (PEEK)
by: Chen, Fei, et al.
Published: (2017)

In-situ measurement and formability improvement in stamping of high strength steel and titanium alloy sheets
by: Zamzuri, Hamedon
Published: (2014)

The effect of sheet thickness to formability using hyperform
by: Fatin Zulaikha, Mohd Hatanan
Published: (2016)

Investigation on a new hole-flanging approach by incremental sheet forming through a featured tool
by: Cao, Tingting, et al.
Published: (2016)

Finite element modeling swift sheet metal formability test
by: Mohamad Faizul, Khoruddin
Published: (2009)

Experimental study of formability of sheet metal in deep drawing process
by: Muhammad Safwan, Ismail
Published: (2011)

Formability of chromate conversion coating on zinc electroplated steel sheet
by: Hamid, N. H. B., et al.
Published: (1999)

Hydraulic fracturing for in situ stress measurements - a simulation and experimental study
by: Rasouli, Vamegh
Published: (2012)

The role of glyceryl trinitrate, a nitric oxide donor, in acute stroke
by: Appleton, Jason Philip
Published: (2019)

Finite element method modeling Fukui sheet metal formability test
by: Ammar, Ismail @ Mukhtar
Published: (2009)

Finite element modelling of Erichsen Olsen sheet metal formability test
by: Islahuddin Idha, Nawawi
Published: (2009)

Finite element analysis of sheet metal formability effect on automotive part
by: Mohd Ariffin, Mohd Khairol Anuar, et al.
Published: (2014)

Finite element modelling of limiting dome high sheet metal formability test
by: Mohammad Amir, Hashim
Published: (2009)

An experimental study to investigate hydraulic fracture reorientation with respect to principal stresses
by: Gotti, A., et al.
Published: (2012)

The mechanical behaviour of cemented granular materials at high pressures
by: Marri, Amanullah
Published: (2010)

Investigating the micro mechanics of cemented sand using DEM
by: de Bono, John P., et al.
Published: (2015)

Performance of fiber reinforced clayey sand composite
by: Chegenizadeh, A, et al.
Published: (2012)

Investigation of material deformation mechanism in double side incremental sheet forming
by: Lu, B., et al.
Published: (2015)

A review of friction stir welding of aluminium matrix composites
by: Salih, Omar S., et al.
Published: (2015)

Research and progress in incremental sheet forming processes
by: Echrif, Salah B. M., et al.
Published: (2011)

Sand production simulation under true-triaxial stress conditions
by: Younessi Sinaki, Ahmad Reza
Published: (2012)

The behaviour of a granular material under repeated loading
by: Boyce, John Rodney
Published: (1976)

Discrete element modelling of scaled railway ballast under triaxial conditions
by: McDowell, Glenn R., et al.
Published: (2016)

Effective stress method on threshold stress of clay under high rate cyclic loading
by: Loh, Richard, et al.
Published: (2012)

Mechanical behaviours of hydrated cement treated crushed rock base as a road base material in Western Australia
by: Jitsangiam, Peerapong, et al.
Published: (2009)

Multi-objective optimization of incremental sheet metal forming
by: Zakaria, Faiz, et al.
Published: (2018)

Analytical and experimental investigation of incremental sheet forming of thermoplastics
by: Zhu, Hui
Published: (2023)

Process simulation and quality evaluation of incremental sheet forming
by: Echrif, Salah B. M., et al.
Published: (2011)