Modelling the coefficient of thermal expansion in Ni-based
superalloys and bond coatings

QR Code

Modelling the coefficient of thermal expansion in Ni-based superalloys and bond coatings

The coefficient of thermal expansion (CTE) of nickel-based superalloys and bond coat layers was modelled by considering contributions from their constituent phases. The equilibrium phase composition of the examined materials was determined using thermodynamic equilibrium software with an appropriate...

Full description

Bibliographic Details
Main Authors:	Karunaratne, M.S.A., Kyaw, Si Thu, Jones, Arthur, Morrell, Roger, Thomson, Rachel C.
Format:	Article
Published:	Springer 2016
Online Access:	https://eprints.nottingham.ac.uk/45360/

Similar Items

Effects of three-dimensional coating interfaces on thermo-mechanical stresses within plasma spray thermal barrier coatings
by: Kyaw, Si, et al.
Published: (2017)

Residual stresses in environmental and thermal barrier coatings on curved superalloy substrates: experimental measurements and modelling
by: Liu, D., et al.
Published: (2014)

Finite element modelling of stresses and failure within plasma spray thermal barrier coating systems
by: Kyaw, Si Thu
Published: (2013)

Predicting the coefficient of thermal expansion for textile composites based on a unit cell approach
by: Brown, Louise P., et al.
Published: (2013)

Volume-based thermoelasticity: Thermal expansion coefficients and the Gruneisen ratio
by: Glasser, Leslie
Published: (2012)

An analytical approach to the β-phase coarsening behaviour in a thermally sprayed CoNiCrAlY bond coat alloy
by: Chen, H., et al.
Published: (2017)

Coefficient of thermal expansion of single-wall carbon nanotube reinforced nanocomposites
by: Dong, Jonathan
Published: (2021)

Modeling the dimensional variations of composites using effective coefficients of thermal expansion
by: Dong, Chensong
Published: (2009)

A regression-based model for the transverse coefficient of thermal expansion of composites
by: Dong, Chensong
Published: (2009)

Dislocation reactions dominated pop-in events in nanoindentation of Ni-based single crystal superalloys
by: Zhang, Z., et al.
Published: (2023)

Negative Thermal Expansion in Ferromagnetic Fe-Ni Invar Alloys
by: Yusof, Hashim, et al.
Published: (2010)

Mesoscale modeling and simulation of microstructure evolution during dynamic recrystallization of a Ni-based superalloy
by: Chen, Fei, et al.
Published: (2016)

Determination of thermal expansion coefficient for ball grid array using digital image correlation
by: Kong, Yat Sheng, et al.
Published: (2022)

Application of small punch creep testing to a thermally sprayed CoNiCrAlY bond coat
by: Chen, H., et al.
Published: (2013)

Development of an engineering model for predicting the transverse coefficients of thermal expansion of unidirectional fiber reinforced composites
by: Dong, Chensong
Published: (2009)

Development of a model for predicting the transverse coefficients of thermal expansion of unidirectional carbon fibre reinforced composites
by: Dong, Chensong
Published: (2008)

Development of low coefficient of thermal expansion composite substrate for electronic packaging using finite element method
by: Pang, Hooi San
Published: (2007)

Flow characteristics and intrinsic workability of IN718 superalloy
by: Chen, Fei, et al.
Published: (2015)

Interaction between the edge dislocation dipole pair and interfacial misfit dislocation network in Ni-based single crystal superalloys
by: Zhang, Z., et al.
Published: (2021)

Atomistic modeling for the extremely low and high temperature-dependent yield strength in a Ni-based single crystal superalloy
by: Zhang, Z., et al.
Published: (2021)

Machinability and surface integrity investigation of Ni-based aerospace superalloys based on energy thresholds investigation and innovative pendulum-based machining
by: Xu, Dong-dong
Published: (2019)

Evaluation of radiation shielding features of Co and Ni-Based superalloys using MCNP-5 code: Potential use in nuclear safety
by: Sayyed, M. I., et al.
Published: (2020)

Variation of consolidation coefficient of expansive clays at high initial water content
by: Habibbeygi, F., et al.
Published: (2018)

Interface bonding of NiCrAlY coating on laser modified H13 tool steel surface
by: Mohamed Reza Zalani, Mohamed Suffian, et al.
Published: (2016)

Interface Bonding of NiCrAlY Coating on Laser Modified H13 Tool Steel Surface
by: M. S., Reza, et al.
Published: (2016)

Fractal scan strategies for selective laser melting of ‘unweldable’ nickel superalloys
by: Catchpole-Smith, S., et al.
Published: (2017)

On the influence of gamma prime upon machining of advanced nickel based superalloy
by: Liao, Zhirong, et al.
Published: (2018)

Staged thermomechanical testing of nickel superalloys produced by selective laser melting
by: Xu, Zhengkai, et al.
Published: (2017)

Investigation of surface integrity in laser-assisted machining of nickel based superalloy
by: Xu, Dongdong, et al.
Published: (2020)

Prediction of bulk modulus and volumetric expansion coefficient of water for leak tightness test of pipelines
by: Bahadori, Alireza, et al.
Published: (2009)

Modes and progression of tool deterioration and their effects on cutting force during end milling of 718plus Ni-based superalloy using cemented WC-Co tools
by: Nurul Hidayah, Razak
Published: (2017)

Spatter and powder evolution in laser powder bed fusion of Nickel-based superalloys
by: Gasper, Alexander
Published: (2019)

Experimental study on surface integrity in end milling of hastelloy c-2000 superalloy
by: Norhaida, Ab Razak, et al.
Published: (2014)

Experiment study on surface integrity in end milling of hastelloy C-2000 superalloy
by: Norhaida, Ab Razak, et al.
Published: (2013)

Microstructural evolution and high strain rate mechanical property of cobalt superalloy contain titanium
by: Tao, Hsing Chen, et al.
Published: (2015)

Finite element modelling of the effect of temperature and neutron dose on the fracture behaviour of nuclear reactor graphite bricks
by: Wadsworth, M., et al.
Published: (2014)

Nonlinear thermal expansion model for SiC/Al
by: Sahroni, Taufik Roni, et al.
Published: (2011)

Thermal expansion model for cast aluminium silicon carbide
by: Taufik, R. S., et al.
Published: (2013)

Nonlinear Thermal Expansion Model for SiC/Al
by: Taufik, Roni Sahroni, et al.
Published: (2011)

Some considerations in using the small punch testing for thermally sprayed CoNiCrAlY coatings
by: Chen, H., et al.
Published: (2018)