Failure mechanism of foamed concrete made with/without additives and lightweight aggregate

QR Code

Failure mechanism of foamed concrete made with/without additives and lightweight aggregate

It has been reported that owing to a densification of the internal structure of concrete, adding mineral admixtures leads to a more brittle behaviour. Therefore, with the intention of modifying (increasing the strength of) foamed concrete to make it suitable for structural purposes by means of admix...

Full description

Bibliographic Details
Main Authors:	Hilal, Ameer Abdulrahman, Thom, Nicholas, Dawson, Andrew
Format:	Article
Published:	Japan Concrete Institute 2016
Subjects:	Foamed concrete Mineral additives Lightweight aggregate Failure mechanism
Online Access:	https://eprints.nottingham.ac.uk/44895/

Similar Items

On void structure and strength of foamed concrete made without/with additives
by: Hilal, Ameer Abdulrahman, et al.
Published: (2015)

Properties and microstructure of pre-formed foamed concretes
by: Hilal, Ameer Abdulrahman
Published: (2015)

The use of additives to enhance properties of pre-formed foamed concrete
by: Hilal, Ameer Abdulrahman, et al.
Published: (2015)

On entrained pore size distribution of foamed concrete
by: Hilal, Ameer Abdulrahman, et al.
Published: (2015)

Lightweight concrete using oil palm shells as aggregates.
by: Abdus Salam, S.K., et al.
Published: (1985)

Flexural and shear behaviour of lightweight expanded polystyrene precast concrete half-slab
by: Saheed, Sanusi
Published: (2014)

Use of palm oil shells as aggregates in lightweight concrete
by: Abang Ali, Abang Abdullah
Published: (1986)

Mix design for fly ash based oil palm shell geopolymer lightweight concrete
by: Kupaei, R., et al.
Published: (2013)

The performance of structural foamed concrete with textile reinforcement (TRFC)
by: Ragrag, Abdalla
Published: (2024)

Shear Behavior of Lightweight Sandwich Reinforced Concrete Slabs
by: Vimonsatit, Vanissorn, et al.
Published: (2011)

Strength Recovery of Lightweight Concrete under Elevated Temperature
by: Barbhuiya, Salim, et al.
Published: (2014)

The properties of recycled precast concrete hollow core slabs for use as replacement aggregate in concrete
by: Marmash, Basem Ezzat
Published: (2011)

Structural characteristics of reinforced concrete beams and slabs with lightweight blocks infill
by: Wahyuni, Ade Sri
Published: (2012)

Foamed bitumen stabilised sandstone aggregates
by: Haji Abdul Karim, Roslinah
Published: (2015)

Reinforced concrete beams with lightweight concrete infill
by: Vimonsatit, Vanissorn, et al.
Published: (2012)

Behavior and Strength of Lightweight Sandwich Reinforced Concrete Beams
by: Vimonsatit, Vanissorn, et al.
Published: (2011)

FEM modelling and analysis of reinforced concrete section with lightweight blocks infill
by: Wahyuni, Ade, et al.
Published: (2012)

Crashworthiness analysis of ellptical automative side door beam for lightweight design
by: Rasooliyazdi, Ehsan
Published: (2014)

Effective stiffness of reinforced concrete section with lightweight blocks infill
by: Wahyuni, Ade, et al.
Published: (2012)

Meso-scale rheological characteristics of foamed bitumen mixtures with high RAP content
by: Sanchez Melo, Diana B.
Published: (2018)

Effect of Aggregate Fine Contents on Foamed Bitumen Stabilisation
by: Huan, Yue, et al.
Published: (2012)

Moisture damage of aggregate-bitumen bonds
by: Zhang, Jizhe
Published: (2016)

Advancing the physical chemical understanding of coffee foam
by: Papageorgiou, Christos
Published: (2024)

Shear Behaviour of Ligthweight Sandwich Reinforced Concrete Slabs
by: Wahyuni, Ade, et al.
Published: (2012)

Pore structure and permeation characteristics of foamed concrete
by: Hilal, Ameer Abdulrahman, et al.
Published: (2014)

Structural behavior of laterally loaded precast foamed concrete sandwich panel
by: Mugahed Amran, Y. H., et al.
Published: (2016)

Long term stability of concrete made from red sand in a marine environment
by: Ghiafeh Davoodi, Majid
Published: (2008)

Engineering characterisation of in situ foamed bitumen stabilised pavements
by: Leek, Colin, et al.
Published: (2014)

Basic strength properties of lightweight concrete using agricultural wastes as aggregates
by: Abang Ali, Abang Abdullah, et al.
Published: (1984)

Fly Ash Based Geopolymer Concrete with Recycled Concrete Aggregate
by: Galvin, Benjamin, et al.
Published: (2011)

Characterization of rubberized cement bound aggregate mixtures using indirect tensile testing and fractal analysis
by: Farhan, Ahmed Hilal, et al.
Published: (2016)

Effect of cementation level on performance of rubberized cement-stabilized aggregate mixtures
by: Farhan, Ahmed Hilal, et al.
Published: (2016)

The properties of geopolymer concrete incorporating red sand as fine aggregate
by: Soltaninaveh, Kaveh
Published: (2008)

Specialty natural rubber latex and latex foam products made therefrom
by: Ramli, Roslim
Published: (2023)

Failure analysis and mechanical behaviors of metamaterials
by: Bhuwal, Akash Singh
Published: (2023)

Geopolymer Concrete with Recycled Concrete Aggregate
by: Galvin, Benjamin, et al.
Published: (2012)

Active filler trials for in situ foamed bitumen stabilised pavements
by: Leek, Colin, et al.
Published: (2014)

Development of a tool to assess in-situ curing of Foamed Bitumen Mixtures
by: Kuna, Kranthi, et al.
Published: (2016)

Physical, structural and mechanical properties of foam glass-ceramics derived from waste soda-lime-silica glass and clamshell
by: Noor Hisham, Noor Aizat
Published: (2021)

Subregional DXA-derived vertebral bone mineral measures are stronger predictors of failure load in specimens with lower areal bone mineral density, compared to those with higher areal bone mineral density
by: Briggs, Andrew, et al.
Published: (2014)