Orientation imaging of macro-sized polysilicon grains on wafers using spatially resolved acoustic spectroscopy
Due to its economical production process polysilicon, or multicrystalline silicon, is widely used to produce solar cell wafers. However, the conversion efficiencies are often lower than equivalent monocrystalline or thin film cells, with the structure and orientation of the silicon grains strongly l...
| Main Authors: | Patel, Rikesh, Li, Wenqi, Smith, Richard J., Sharples, Steve D., Clark, Matt |
|---|---|
| Format: | Article |
| Published: |
Elsevier
2017
|
| Subjects: | |
| Online Access: | https://eprints.nottingham.ac.uk/44204/ |
Similar Items
Spatially resolved acoustic spectroscopy for rapid imaging of material microstructure and grain orientation
by: Smith, Richard J., et al.
Published: (2014)
by: Smith, Richard J., et al.
Published: (2014)
Spatially resolved acoustic spectroscopy for selective laser melting
by: Smith, Richard J., et al.
Published: (2016)
by: Smith, Richard J., et al.
Published: (2016)
Spatially resolved acoustic spectroscopy (SRAS) technology development
by: Coulson, Jethro
Published: (2016)
by: Coulson, Jethro
Published: (2016)
Imaging material texture of as-deposited selective laser melted parts using spatially resolved acoustic spectroscopy
by: Patel, Rikesh, et al.
Published: (2018)
by: Patel, Rikesh, et al.
Published: (2018)
Assessing the capability of in-situ nondestructive analysis during layer based additive manufacture
by: Hirsch, Matthias, et al.
Published: (2016)
by: Hirsch, Matthias, et al.
Published: (2016)
All-optical scanning acoustic microscope
by: Sharples, Steve David
Published: (2003)
by: Sharples, Steve David
Published: (2003)
Inspection of additively manufactured components by spatially resolved acoustic spectroscopy
by: Dryburgh, Paul
Published: (2022)
by: Dryburgh, Paul
Published: (2022)
Comparison of grain to grain orientation and stiffness mapping by spatially resolved acoustic spectroscopy and EBSD
by: Mark, A.F., et al.
Published: (2017)
by: Mark, A.F., et al.
Published: (2017)
Laser ultrasonic method for determination of crystallographic orientation of large grain metals by spatially resolved acoustic spectroscopy (SRAS)
by: Li, Wenqi
Published: (2012)
by: Li, Wenqi
Published: (2012)
Effect of Grain Size and Controlled Atmospheres on the Thermal Stability of Aluminium Titanate
by: Low, It-Meng, et al.
Published: (2010)
by: Low, It-Meng, et al.
Published: (2010)
Development of mobile magnetic imaging system based on 1-D hall sensor array
by: Ng, Wei Shin
Published: (2012)
by: Ng, Wei Shin
Published: (2012)
Meso-scale defect evaluation of selective laser melting using spatially resolved acoustic spectroscopy
by: Hirsch, Matthias, et al.
Published: (2017)
by: Hirsch, Matthias, et al.
Published: (2017)
Effect Of Temperature And Electric Field On Polysilicon Gettering Of Copper Impurities In Silicon Wafer
by: Choong, Chwee Lin
Published: (2006)
by: Choong, Chwee Lin
Published: (2006)
Time-domain estimation of acoustic radiation modes and active structural acoustic control
by: Md Nor, Khairul Affendy, et al.
Published: (2016)
by: Md Nor, Khairul Affendy, et al.
Published: (2016)
Utilisation of indigenous resources for acoustical applications / Valliyappan D. Natarajan and Mohd Jailani Mohd Nor
by: Natarajan, Valliyappan David, et al.
Published: (2004)
by: Natarajan, Valliyappan David, et al.
Published: (2004)
Modelling sound propagation under ice using the Ocean Acoustics Library's Acoustic Toolbox
by: Alexander, P., et al.
Published: (2012)
by: Alexander, P., et al.
Published: (2012)
Acoustic metamaterial for image detection
by: Abdul Hamid, Siti Zaleha, et al.
Published: (2018)
by: Abdul Hamid, Siti Zaleha, et al.
Published: (2018)
Tomography systems and sound manipulation using acoustic
by: Abdul Hamid, Siti Zaleha, et al.
Published: (2018)
by: Abdul Hamid, Siti Zaleha, et al.
Published: (2018)
Sound absorption performance of EFBMF panel for building acoustic material
by: Samsudin, Emedya Murniwaty
Published: (2018)
by: Samsudin, Emedya Murniwaty
Published: (2018)
Adaptive control of radiated sound power based on time-domain estimates of acoustic radiation modes
by: Md Nor, Khairul Affendy, et al.
Published: (2017)
by: Md Nor, Khairul Affendy, et al.
Published: (2017)
Nondestructive evaluation of thermal barrier coatings
by: Tan, Bo
Published: (2017)
by: Tan, Bo
Published: (2017)
Pendekatan ujian tak memusnah bagi penganalisaan ciri kenyal bahan kayu.
by: Ab. Aziz, Sidek, et al.
Published: (1990)
by: Ab. Aziz, Sidek, et al.
Published: (1990)
Malaysian pineapple (Yankee) leaf fiber composites damage investigation using non-destructive techniques
by: Najeeb, Muhammad Imran
Published: (2022)
by: Najeeb, Muhammad Imran
Published: (2022)
Relations between acoustic and articulatory measurements of /l/
by: Ying, J., et al.
Published: (2012)
by: Ying, J., et al.
Published: (2012)
Efficient modelling of mid to high frequency underwater acoustic propagation
by: Duncan, Alexander, et al.
Published: (2013)
by: Duncan, Alexander, et al.
Published: (2013)
Particle manipulation by adhere method as travelling surface acoustic wave
by: Nor Halim, Nur Amiera
Published: (2021)
by: Nor Halim, Nur Amiera
Published: (2021)
Picosecond/THz acoustic measurements of semiconductor devices
by: Devireddy, Srikanth Reddy
Published: (2018)
by: Devireddy, Srikanth Reddy
Published: (2018)
Glass fiber-reinforced polyester composite fatigue crack monitoring using acoustic emission
by: Gholizadeh, Samira
Published: (2015)
by: Gholizadeh, Samira
Published: (2015)
Measurements of Doppler and delay spreading of communication signals in medium depth and shallow underwater acoustic channels
by: Caley, Michael, et al.
Published: (2012)
by: Caley, Michael, et al.
Published: (2012)
Development of double surface acoustic wave resonator system for hydrogen nd ammonia gas sensing
by: Yunusa, Zainab
Published: (2015)
by: Yunusa, Zainab
Published: (2015)
Development of non-destructive small specimen creep testing techniques
by: Ali, Balhassn S. M.
Published: (2014)
by: Ali, Balhassn S. M.
Published: (2014)
Risk factors of occupational stress among non-destructive testing radiographers in Saudi Arabia
by: Khalaf, Alsharafat Khalaf Sail
Published: (2018)
by: Khalaf, Alsharafat Khalaf Sail
Published: (2018)
Evaluation of sound comfort in examination hall using acoustical environmental analyses
by: M., Mohd Amran, et al.
Published: (2013)
by: M., Mohd Amran, et al.
Published: (2013)
Investigation of underwater acoustic multi-path Doppler and delay spreading in a shallow marine environment
by: Caley, Michael, et al.
Published: (2013)
by: Caley, Michael, et al.
Published: (2013)
Passive acoustic detection of Shark Bay dugons (Dugon dugon)
by: Parsons, Miles, et al.
Published: (2012)
by: Parsons, Miles, et al.
Published: (2012)
Modelling acoustic transmission loss due to sea ice cover
by: Alexander, P., et al.
Published: (2013)
by: Alexander, P., et al.
Published: (2013)
Crystallization and characterization of struvite crystals through gel growth technique
by: Salsabili, Ahmad
Published: (2017)
by: Salsabili, Ahmad
Published: (2017)
Crystallographic analysis of ground- and space-grown thermostable T1 lipase crystal
by: Mohamad Aris, Sayangku Nor Ariati
Published: (2013)
by: Mohamad Aris, Sayangku Nor Ariati
Published: (2013)
Real-time unsupervised incremental support vector machine for oil and gas pipeline NDT system
by: Nik Zulkepeli, Nik Ahmad Akram
Published: (2016)
by: Nik Zulkepeli, Nik Ahmad Akram
Published: (2016)
Passive acoustic monitoring of baleen whales in Geographe Bay, Western Australia
by: Salgado Kent, Chandra, et al.
Published: (2012)
by: Salgado Kent, Chandra, et al.
Published: (2012)
Similar Items
-
Spatially resolved acoustic spectroscopy for rapid imaging of material microstructure and grain orientation
by: Smith, Richard J., et al.
Published: (2014) -
Spatially resolved acoustic spectroscopy for selective laser melting
by: Smith, Richard J., et al.
Published: (2016) -
Spatially resolved acoustic spectroscopy (SRAS) technology development
by: Coulson, Jethro
Published: (2016) -
Imaging material texture of as-deposited selective laser melted parts using spatially resolved acoustic spectroscopy
by: Patel, Rikesh, et al.
Published: (2018) -
Assessing the capability of in-situ nondestructive analysis during layer based additive manufacture
by: Hirsch, Matthias, et al.
Published: (2016)