Effect of test conditions on the temperature at which a protective debris bed is formed in fretting of a high strength steel

QR Code

Effect of test conditions on the temperature at which a protective debris bed is formed in fretting of a high strength steel

It is well known that mechanisms and rates of fretting wear of many metals are dependent upon the temperature of the environment; specifically, it is known that a transition temperature exists, above which the debris forms a protective bed in the contact which results in very low rates of wear being...

Full description

Bibliographic Details
Main Authors:	Hayes, E.K., Shipway, P.H.
Format:	Article
Published:	Elsevier 2017
Subjects:	Debris; Glaze; Temperature; Contact geometry
Online Access:	https://eprints.nottingham.ac.uk/43620/

Similar Items

The role of frictional power dissipation (as a function of frequency) and test temperature on contact temperature and the subsequent wear behaviour in a stainless steel contact in fretting
by: Jin, X., et al.
Published: (2015)

Fretting wear mapping: the influence of contact geometry and frequency on debris formation and ejection for a steel-on-steel pair
by: Warmuth, A.R., et al.
Published: (2015)

The roles of contact conformity, temperature and displacement amplitude on the lubricated fretting wear of a steel-on-steel contact
by: Warmuth, A.R., et al.
Published: (2016)

The influence of surface hardness on the fretting wear of steel pairs: its role in debris retention in the contact
by: Lemm, J.D., et al.
Published: (2014)

Effects of surface roughness on local friction and temperature distributions in a steel-on-steel fretting contact
by: Qin, W., et al.
Published: (2018)

The role of temperature and frequency on fretting wear of a like-on-like stainless steel contact
by: Jin, X., et al.
Published: (2017)

The role of debris in fretting: investigation into the interrelated effects of displacement amplitude and frequency in fretting wear
by: Kirk, Adam
Published: (2021)

A model for the role of debris ejection in development of fretting wear
by: Zhu, Tengtuo
Published: (2022)

An experimental study on the key fretting variables for flexible marine risers
by: O’Halloran, S.M., et al.
Published: (2018)

Windborne debris in the urban environment
by: Owen, John S.
Published: (2015)

Effects of glazes on the keeping quality of bread
by: Abdullah, Rohaiza
Published: (2010)

The role of geometry changes and debris formation associated with wear on the temperature field in fretting contacts
by: Jin, X., et al.
Published: (2016)

Laboratory test and numerical simulation of laminated glass window vulnerability to debris impact
by: Zhang, X., et al.
Published: (2013)

The nanoscale characterization and interparticulate interactions of pharmaceutical materials
by: Hooton, Jennifer Claire
Published: (2003)

From sliding–rolling loci to instantaneous kinematics: An adjoint approach
by: Cui, Lei, et al.
Published: (2015)

The effect of temperature on wear and friction of a high strength steel in fretting
by: Pearson, S.R., et al.
Published: (2013)

Transport and release of chemicals from plastics to the environment and to wildlife.
by: Teuten, Emma L., et al.
Published: (2009)

Fluid-particle interaction in geophysical flows: debris flow
by: Paleo Cageao, Paloma
Published: (2014)

Waterborne debris impacts on masonry structures in extreme hydrodynamic events
by: De Iasio, Alessandro
Published: (2025)

Failure analysis of corrugated panel subjected to windborne debris impacts
by: Chen, Wensu, et al.
Published: (2014)

Chemical and isotopic analysis in the investigation of glazes from Northern China and the Middle East, 7th-14th centuries AD
by: Shen, Jingyi
Published: (2017)

Prediction of floatable litter using hydrological response modeling at Sungai Batu catchment
by: Abdul Malik, Nur Khaliesah
Published: (2019)

The numerical simulation of plate-type windborne debris flight
by: Kakimpa, Bruce
Published: (2012)

Meteoritic ablation debris from the Transantarctic Mountains: Evidence for a Tunguska-like impact over Antarctica ca. 480 ka ago
by: Van Ginneken, M., et al.
Published: (2010)

Structural behaviour of bending active structures. The impact of load distribution, geometry, temperature and wind loads on the structural performance
by: Barari Reshtehroudi, MohammadMahdi
Published: (2022)

A Polynomial Formulation of Inverse Kinematics of Rolling Contact
by: Cui, Lei, et al.
Published: (2015)

Novel thin-film photovoltaic vacuum glazing
by: Aguilar-Santana, Jorge Luis
Published: (2022)

Experimental and Numerical Study of Composite Lightweight Structural Insulated Panel with Expanded Polystyrene Core against Windborne Debris Impacts
by: Chen, Wensu, et al.
Published: (2014)

Maass cusp form on asymmetric hyperbolic torus
by: Shamsuddin, Nor Syazana
Published: (2017)

Investigation of the interrelated effects of temperature and frequency on fretting wear
by: Jin, Xiaozhe
Published: (2017)

Is the wear coefficient dependent upon slip amplitude in fretting?: Vingsbo and Söderberg revisited
by: Pearson, S.R., et al.
Published: (2014)

Contamination of µCMM stylus tips: on-machine inspection
by: Feng, Xiaobing, et al.
Published: (2016)

Parallax in “Pi of the Sky” project
by: Majcher, A, et al.
Published: (2013)

Glazing system with transparent insulation material for building energy saving and daylight comfort
by: Sun, Yanyi
Published: (2017)

The development of a low carbon prefabricated house
by: Zhang, Shihao
Published: (2022)

Mixed ice accretion on aircraft wings
by: Janjua, Zaid A., et al.
Published: (2018)

Development of an adaptive façade for visual comfort, daylight and thermal control element
by: Liang, Runqi
Published: (2018)

Low dimensional adelic geometry
by: Dolce, Paolo
Published: (2019)

Arithmetic deformation theory via arithmetic fundamental groups and nonarchimedean theta functions, notes on the work of Shinichi Mochizuki
by: Fesenko, Ivan
Published: (2015)

Study of a simplified parametric control of split louver and its combination with bifacial PV technology in architectural environmental design
by: Alsukkar, Muna
Published: (2023)