A novel method for the manufacture of porous structures with multi-component, coated pores

QR Code

A novel method for the manufacture of porous structures with multi-component, coated pores

A novel process is demonstrated which is able to produce porous structures with internal coatings. This is achieved using sacrificial porogens which are coated with a powder and which are then infiltrated by compression moulding using a molten polymer. The coating powder is transferred to the pore a...

Full description

Bibliographic Details
Main Authors:	Siddiq, Abdur R., Kennedy, Andrew R.
Format:	Article
Published:	Elsevier 2017
Subjects:	Porous material; Surface modification; Polymer processing; Coating
Online Access:	https://eprints.nottingham.ac.uk/41768/

Similar Items

Porous titanium manufactured by a novel powder tapping method using spherical salt bead space holders: characterisation and mechanical properties
by: Jia, Jiangang, et al.
Published: (2015)

Aqueous film-coating with the ultra-coater (hybrid coater)
by: Kwok, Swee Har Teresa
Published: (2004)

Structural, optical and thermal properties of as-prepared and annealed gold-coated porous silicon
by: Behzad, Kasra
Published: (2012)

Synthesis and characterization of transparent superhydrophobic fluorinated graphene oxide and silica based sol gel coating films
by: Harun, Mohd Hamzah
Published: (2020)

A novel method for the fabrication of porous Poly-Ether-Ether-Ketone using sodium chloride as a porogen
by: Siddiq, Abdur Rahman
Published: (2016)

Experimental and numerical investigation of plain and Ni-reinforced porous alumina ceramics composites produced with agro-waste pore formers
by: Theophilus, Dele-Afolabi Temitope
Published: (2018)

Wire flame sprayed aluminium coatings onto polymer and CFRP substrates
by: Lunn, Geoffrey David
Published: (2018)

Deposition of satellited Al-TiC powders for coating applications
by: Al-hamdani, Kamaal
Published: (2019)

Assessing the potential for multi-functional “hybrid” porous Al-phase change material structures
by: Kennedy, Andrew R.
Published: (2016)

Measurement and simulation of pressure drop across replicated porous aluminium in the Darcy-Forchheimer regime
by: Otaru, A.J., et al.
Published: (2018)

Effect of Greywater Irrigation on Air-Water Interfacial area in Porous Medium
by: Anwar, Faisal
Published: (2012)

Development of improved cold spray and HVOF deposited coatings
by: Marrocco, Tiziana
Published: (2008)

Development and characterization of flax/carbon/Kevlar reinforced bio-phenolic/epoxy blends hybrid composites for ballistic helmet
by: Ismail, Ahmad Safwan
Published: (2023)

Surface modification of multi-walled carbon nanotube using double-chained quaternary ammonium bromide
by: Osman, Mohd Junaedy, et al.
Published: (2016)

Experimental investigation of pressure-drop characteristics across multi-layer porous metal structures
by: Oun, Hatem, et al.
Published: (2014)

Porous poly-ether ether ketone (PEEK) manufactured by a novel powder route using near-spherical salt bead porogens: characterisation and mechanical properties
by: Siddiq, Abdur R., et al.
Published: (2015)

Synthesis and characterization of palm-based resin for UV coating
by: Mei, Yee Cheong, et al.
Published: (2009)

Cold gas dynamic spraying of titanium coatings
by: Price, Timothy Simon
Published: (2008)

Tailoring the pressure-drop in multi-layered open-cell porous inconel structures
by: Oun, Hatem, et al.
Published: (2015)

Electrolyte design for suspended particulates in electrolyte jet processing
by: Clare, Adam T., et al.
Published: (2017)

Methane-Induced Deformation of Porous Carbons: From Normal to High-Pressure Operating Conditions
by: Kowalczyk, Piotr, et al.
Published: (2012)

Design of a multi-sensor in-situ inspection system for additive manufacturing
by: Dickins, Andrew
Published: (2023)

The continuous manufacture of dispersant coated bioresorbable nanoparticles
by: Walton, Kirsty E.
Published: (2018)

A novel method for metal–diamond composite coating deposition with cold spray and formation mechanism
by: Aldwell, Barry, et al.
Published: (2016)

Novel surface generation and characterisation by electrochemical jet processing
by: Speidel, Alistair
Published: (2018)

Preparation and characterization of lanthanum phosphate nanosparticles by solgel spin coating method / Zainurul Atikah Zakaria
by: Zakaria, Zainurul Atikah
Published: (2020)

Discrete element modelling of the packing of spheres and its application to the structure of porous metals made by infiltration of packed beds of NaCl beads
by: Langston, P., et al.
Published: (2014)

The permeability of virtual macroporous structures generated by sphere packing models: comparison with analytical models
by: Otaru, A.J., et al.
Published: (2016)

Porous calcium phosphate glass microspheres for orthobiologic applications
by: Hossain, Kazi Md Zakir, et al.
Published: (2018)

Electrical and barrier properties of modified polyaniline coating films and its effects on the corrosion protection of mild steel / Amirah Amalina Ahmad Tarmizi
by: Ahmad Tarmizi, Amirah Amalina
Published: (2017)

Genetic algorithm-based pore network extraction from micro-computed tomography images
by: Ebrahimi, A., et al.
Published: (2013)

Quantitative assessment of the surface crack density in thermal barrier coatings
by: Yang, L., et al.
Published: (2014)

Scanning electrochemical microscopy at thermal sprayed anti-corrosion coatings: effect of thermal spraying on heterogeneous electron transfer kinetics
by: Niaz, Akbar, et al.
Published: (2011)

Potential of jatropha oil and derivatives as an ultraviolet curable self-healing coating
by: Mudri, Nurul Huda
Published: (2023)

Processes in Pathogenic Biocolloidal Contaminants Transport in Saturated and Unsaturated Porous Media: A Review
by: Sen, Tushar
Published: (2011)

Design integration of novel porous ceramic evaporative cooling systems
by: Vallejo, Juan
Published: (2018)

Numerical study on interaction of surface cracking and interfacial delamination in thermal barrier coatings under tension
by: Zhu, W., et al.
Published: (2014)

Preparation of Porous Silicon by Electrochemical Etching in the Fabrication of a Solar Cell
by: Magentharau, Adin Naraina
Published: (2003)

Effects of three-dimensional coating interfaces on thermo-mechanical stresses within plasma spray thermal barrier coatings
by: Kyaw, Si, et al.
Published: (2017)

Surface chemical and physical modification in stent technology for the treatment of coronary artery disease
by: Nazneen, F., et al.
Published: (2012)