HVOF and laser cladded Fe-Cr-B coating in simulated biomass combustion: microstructure and fireside corrosion
Biomass is often considered as a low carbon alternative to fossil fuels in the power industry. However the heat exchangers in biomass plants can suffer from chloride based aggressive fireside corrosion. A commercially available amorphous Fe-Cr-B alloy was deposited onto a stainless steel substrate b...
| Main Authors: | Reddy, Liam, Shipway, P.H., Davis, Colin, Hussain, Tanvir |
|---|---|
| Format: | Article |
| Published: |
Springer
2017
|
| Subjects: | |
| Online Access: | https://eprints.nottingham.ac.uk/41759/ |
Similar Items
Laser clad and HVOF sprayed Stellite 6 coating in chlorine rich environment with KCI at 700 °C
by: Pala, Zdenek, et al.
Published: (2017)
by: Pala, Zdenek, et al.
Published: (2017)
Process parameter optimisation of laser clad iron based alloy: predictive models of deposition efficiency, porosity and dilution
by: Reddy, Liam, et al.
Published: (2018)
by: Reddy, Liam, et al.
Published: (2018)
High-temperature performance of ferritic steels in fireside corrosion regimes: temperature and deposits
by: Dudziak, T., et al.
Published: (2016)
by: Dudziak, T., et al.
Published: (2016)
Influence of KCl and HCl on high temperature corrosion of HVAF-sprayed NiCrAlY and NiCrMo coatings
by: Sadeghimeresht, Esmaeil, et al.
Published: (2018)
by: Sadeghimeresht, Esmaeil, et al.
Published: (2018)
The effects of microstructural features on the performance gap in corrosion resistance between bulk and HVOF sprayed Inconel 625
by: Ahmed, N., et al.
Published: (2010)
by: Ahmed, N., et al.
Published: (2010)
Laser cladding of Ni50Cr: a parametric and dilution study
by: Song, B., et al.
Published: (2016)
by: Song, B., et al.
Published: (2016)
Corrosion behaviour of crystalline and amorphous forms of the glass forming alloy Fe43Cr16Mo16C15B10
by: Bakare, M.S., et al.
Published: (2012)
by: Bakare, M.S., et al.
Published: (2012)
Laser cladding of Ni50Cr: a parametric and dilution study
by: Song, B., et al.
Published: (2016)
by: Song, B., et al.
Published: (2016)
Chlorine-induced high temperature corrosion of HVAF-sprayed Ni-based alumina and chromia forming coatings
by: Sadeghimeresht, Esmaeil, et al.
Published: (2018)
by: Sadeghimeresht, Esmaeil, et al.
Published: (2018)
Laser deposition of Inconel 625/tungsten carbide composite coatings by powder and wire feedstock
by: Abioye, Taiwo E.
Published: (2014)
by: Abioye, Taiwo E.
Published: (2014)
Role of oxides and porosity on high temperature oxidation of liquid fuelled HVOF thermal sprayed Ni50Cr coatings
by: Song, B., et al.
Published: (2017)
by: Song, B., et al.
Published: (2017)
Inhibition of metal dusting using thermal spray coatings and laser treatment
by: Voisey, K.T., et al.
Published: (2006)
by: Voisey, K.T., et al.
Published: (2006)
Gas and liquid-fuelled HVOF spraying of Ni50Cr coating: microstructure and high temperature oxidation
by: Song, B., et al.
Published: (2016)
by: Song, B., et al.
Published: (2016)
Experimental and thermodynamic investigations on the chlorine-induced corrosion of HVOF thermal sprayed NiAl coatings and 304 stainless steels at 700 °C
by: Bai, Mingwen, et al.
Published: (2018)
by: Bai, Mingwen, et al.
Published: (2018)
The effect of coating architecture and defects on the corrosion behaviour of a PVD multilayer Inconel 625/Cr coating
by: Daure, J.L., et al.
Published: (2017)
by: Daure, J.L., et al.
Published: (2017)
Thermal spray and laser cladding of nickel-chromium coatings for high temperature applications
by: Song, Bo
Published: (2018)
by: Song, Bo
Published: (2018)
Coconut pulp waste extract (cocos nucifera l.) as corrosion inhibitor for mild steel in 1.0 M acid corrosion
by: Rahim, Norin Hafizah
Published: (2017)
by: Rahim, Norin Hafizah
Published: (2017)
A study of bonding mechanisms and corrosion behaviour of cold sprayed coatings
by: Hussain, Tanvir
Published: (2011)
by: Hussain, Tanvir
Published: (2011)
An investigation of the ABA laser cladding process: A new Laser – Direct Energy Deposition (DED) technique
by: Koti, Daniel
Published: (2024)
by: Koti, Daniel
Published: (2024)
Effect of SiO2 dispersion on chlorine-induced high temperature corrosion of HVAF-sprayed NiCrMo coating
by: Sadeghimeresht, Esmaeil, et al.
Published: (2018)
by: Sadeghimeresht, Esmaeil, et al.
Published: (2018)
Effect of particle and carbide grain sizes on a HVOAF WC-Co-Cr coating for the future application on internal surfaces: microstructure and wear
by: Pulsford, J., et al.
Published: (2017)
by: Pulsford, J., et al.
Published: (2017)
Some aspects on modelling of the β-phase depletion behaviour under different oxide growth kinetics in HVOF CoNiCrAlY coatings
by: Chen, H., et al.
Published: (2017)
by: Chen, H., et al.
Published: (2017)
Crevice Corrosion Studies on Corrosion Resistant Alloys in Stagnant Natural Seawater
by: Machuca, Laura, et al.
Published: (2013)
by: Machuca, Laura, et al.
Published: (2013)
Microbial Corrosion Resistance of Stainless Steels for Marine Energy Installations
by: Machuca, L., et al.
Published: (2011)
by: Machuca, L., et al.
Published: (2011)
The Role of Tungsten on the Phase Transformation Kinetics and its Correlation with the Localized Corrosion Resistance of 25Cr Super Duplex Stainless Steels.
by: Torres, Cristian, et al.
Published: (2020)
by: Torres, Cristian, et al.
Published: (2020)
Preparation and characterization of anti-corrosive coatings based on silane functionalized graphene oxide/ epoxy resin nanocomposites
by: Musa, Aujara Kabiru
Published: (2020)
by: Musa, Aujara Kabiru
Published: (2020)
Evaluation of inulin and aloe vera as green corrosion inhibitors for mild steel in 15% HCl
by: Ajayi, O.M, et al.
Published: (2016)
by: Ajayi, O.M, et al.
Published: (2016)
Three-body tribocorrosion of high-chromium cast irons in neutral and alkaline environments
by: Salasi, Mobin, et al.
Published: (2011)
by: Salasi, Mobin, et al.
Published: (2011)
Palm olein corrosion inhibitor for aluminium in Hcl solution / Junaidah Jai and Wan Shabuddin Wan Ali
by: Jai, Junaidah, et al.
Published: (2011)
by: Jai, Junaidah, et al.
Published: (2011)
Electrochemical studies on carbon dioxide corrosion and its inhibition.
by: Tan, Yong-jun
Published: (1996)
by: Tan, Yong-jun
Published: (1996)
The Development of an Online Course in Corrosion Engineering – A Critical Aspect in any Corrosion Management System
by: Gubner, Rolf, et al.
Published: (2011)
by: Gubner, Rolf, et al.
Published: (2011)
Evaluation of the effects of seawater ingress into 316L lined pipes on corrosion performance
by: Machuca, Laura, et al.
Published: (2014)
by: Machuca, Laura, et al.
Published: (2014)
Filtration–UV irradiation as an option for mitigating the risk of microbiologically influenced corrosion of subsea construction alloys in seawater
by: Machuca, Laura, et al.
Published: (2014)
by: Machuca, Laura, et al.
Published: (2014)
Al-Co-Ce glass forming alloys and their corrosion behaviour
by: Li, Chunling
Published: (2014)
by: Li, Chunling
Published: (2014)
A Laboratory Technique for Evaluating Marine Splash Zone Corrosion
by: Li, X., et al.
Published: (2012)
by: Li, X., et al.
Published: (2012)
Effect of oxygen and biofilms on crevice corrosion of UNS S31803 and UNS N08825 in natural seawater
by: Machuca, Laura, et al.
Published: (2013)
by: Machuca, Laura, et al.
Published: (2013)
Top-of-the-Line Corrosion in The Presence of Hydrocarbon Co-Condensation in Flowing Condition
by: Pojtanabuntoeng, Thunyaluk, et al.
Published: (2012)
by: Pojtanabuntoeng, Thunyaluk, et al.
Published: (2012)
New Experimental Rig to Investigate Abrasive–Corrosive Characteristics of Metals in Aqueous Media
by: Salasi, Mobin, et al.
Published: (2010)
by: Salasi, Mobin, et al.
Published: (2010)
Testing of generic volatile inhibitor compounds in different top-of-the-line corrosion laboratory test methods
by: Oehler, Mike, et al.
Published: (2012)
by: Oehler, Mike, et al.
Published: (2012)
Corrosion of Stainless Steels in the Marine Splash Zone
by: Bailey, Stuart, et al.
Published: (2013)
by: Bailey, Stuart, et al.
Published: (2013)
Similar Items
-
Laser clad and HVOF sprayed Stellite 6 coating in chlorine rich environment with KCI at 700 °C
by: Pala, Zdenek, et al.
Published: (2017) -
Process parameter optimisation of laser clad iron based alloy: predictive models of deposition efficiency, porosity and dilution
by: Reddy, Liam, et al.
Published: (2018) -
High-temperature performance of ferritic steels in fireside corrosion regimes: temperature and deposits
by: Dudziak, T., et al.
Published: (2016) -
Influence of KCl and HCl on high temperature corrosion of HVAF-sprayed NiCrAlY and NiCrMo coatings
by: Sadeghimeresht, Esmaeil, et al.
Published: (2018) -
The effects of microstructural features on the performance gap in corrosion resistance between bulk and HVOF sprayed Inconel 625
by: Ahmed, N., et al.
Published: (2010)