Effective carbon adsorbents of solid looping technologies for post combustion carbon capture
Carbon Capture and Storage (CCS) has been considered as one of the most promising techniques to reduce anthropogenic CO2 emissions in the atmosphere. As an alternative to replace the traditional technology of aqueous amine scrubbing, solid adsorbents looping technology (SALT) has attracted growing a...
| Main Author: | Liu, Jingjing |
|---|---|
| Format: | Thesis (University of Nottingham only) |
| Language: | English |
| Published: |
2017
|
| Subjects: | |
| Online Access: | https://eprints.nottingham.ac.uk/39456/ |
Similar Items
Process simulations of post-combustion CO2 capture for coal and natural gas-fired power plants using a polyethyleneimine/silica adsorbent
by: Zhang, Wenbin, et al.
Published: (2017)
by: Zhang, Wenbin, et al.
Published: (2017)
Parametric study on the regeneration heat requirement of an amine-based solid adsorbent process for post-combustion carbon capture
by: Zhang, Wenbin, et al.
Published: (2016)
by: Zhang, Wenbin, et al.
Published: (2016)
Performance of polyethyleneimine–silica adsorbent for post-combustion CO2 capture in a bubbling fluidized bed
by: Zhang, Wenbin, et al.
Published: (2014)
by: Zhang, Wenbin, et al.
Published: (2014)
Development and performance evaluation of alkali-intercalated nano-porous carbons materials from waste plastics for CO2 capture applications
by: Alamro, Mohammed
Published: (2025)
by: Alamro, Mohammed
Published: (2025)
High density and super ultra-microporous-activated carbon macrospheres with high volumetric capacity for CO2 capture
by: Liu, Jingjing, et al.
Published: (2017)
by: Liu, Jingjing, et al.
Published: (2017)
Capturing CO2 from ambient air using a polyethyleneimine–silica adsorbent in fluidized beds
by: Zhang, Wenbin, et al.
Published: (2014)
by: Zhang, Wenbin, et al.
Published: (2014)
Fabrication and investigation of carbon materials for carbon dioxide capture and hydrogen storage prepared via templating or activation routes
by: Balahmar, N.
Published: (2019)
by: Balahmar, N.
Published: (2019)
Synthesis of functional materials for carbon capture via microfluidic platform
by: Yew, Maxine
Published: (2021)
by: Yew, Maxine
Published: (2021)
Rational Synthesis of Activated Carbons for Enhanced CO2 Uptake and Methane Storage
by: Albeladi, Nawaf
Published: (2024)
by: Albeladi, Nawaf
Published: (2024)
Synthesis of MOFs for carbon capture application
by: Chen, Yipei
Published: (2018)
by: Chen, Yipei
Published: (2018)
Facile synthesis of novel activated carbons for the post-combustion capture of CO2
by: Liu, Xin
Published: (2017)
by: Liu, Xin
Published: (2017)
Moving bed temperature swing adsorption processes for post-combustion CO2 capture
by: Meghani, Bishan
Published: (2015)
by: Meghani, Bishan
Published: (2015)
Mesoporous carbon with large pores as anode for Na-ion batteries
by: Liu, J., et al.
Published: (2014)
by: Liu, J., et al.
Published: (2014)
Oxy-fuel combustion study of biomass fuels in a 20 kWth fluidized bed combustor
by: Sher, Farooq, et al.
Published: (2018)
by: Sher, Farooq, et al.
Published: (2018)
Carbon dioxide sequestration by mineral carbonation using electric arc furnace slag
by: Ogakwu, Omale Sunday
Published: (2020)
by: Ogakwu, Omale Sunday
Published: (2020)
Carbon capture and utilisation: application of life cycle thinking to process design
by: Cuellar-Franca, Rosa, et al.
Published: (2015)
by: Cuellar-Franca, Rosa, et al.
Published: (2015)
Synthesis of microcapsules for carbon capture via needle-based droplet microfluidics
by: Yew, Maxine, et al.
Published: (2019)
by: Yew, Maxine, et al.
Published: (2019)
Development of solid adsorbent materials for CO₂capture
by: Ogbuka, Chidi Premie
Published: (2013)
by: Ogbuka, Chidi Premie
Published: (2013)
The design, synthesis and characterisation of amine
functionalised silica adsorbents for post combustion
carbon capture
by: Starkie, Christopher
Published: (2016)
by: Starkie, Christopher
Published: (2016)
Continuous synthesis and scaled shaping of archetypal metal-organic frameworks for carbon capture applications
by: Oakley, William
Published: (2024)
by: Oakley, William
Published: (2024)
Understanding the relationship between synthetic conditions, porosity and CO2 uptake capacity of turbostratic carbons
by: Blankenship, L. Scott
Published: (2023)
by: Blankenship, L. Scott
Published: (2023)
Development, characterisation and evaluation of novel approaches to improve the lifetime performance of amine-based materials for carbon capture in power plants
by: Sun, Yuan
Published: (2018)
by: Sun, Yuan
Published: (2018)
Novel co-precipitated oxygen carriers for chemical looping combustion of gaseous fuel
by: Ekpe, Ngozi Chinwe
Published: (2017)
by: Ekpe, Ngozi Chinwe
Published: (2017)
Review on Dye Removal from Its Aqueous Solution into Alternative Cost Effective and Non-Conventional Adsorbents
by: Dawood, Sara., et al.
Published: (2014)
by: Dawood, Sara., et al.
Published: (2014)
Preparation and Characterization of Palm Kernel Shell Activated Carbons
by: Mak, Sharon Monica
Published: (2003)
by: Mak, Sharon Monica
Published: (2003)
Agricultural solid wastes in aqueous phase dye adsorption: A Review
by: Afroze, Sharmeen, et al.
Published: (2015)
by: Afroze, Sharmeen, et al.
Published: (2015)
Potential of mine waste material for mineral carbonation process in carbon capture and utilization application
by: M. Molahid, Verma Loretta
Published: (2022)
by: M. Molahid, Verma Loretta
Published: (2022)
Understanding and minimising water vapour co-adsorption for activated carbons in post-combustion CO2 capture
by: Albazzaz, Shaima
Published: (2020)
by: Albazzaz, Shaima
Published: (2020)
Simultaneous removal of carbon dioxide, sulphur dioxide and nitrogen oxides using activated carbon modified with metal oxides
by: Madzaki, Hazimah
Published: (2018)
by: Madzaki, Hazimah
Published: (2018)
Development of Three-Dimensional Mesoporous Biocarbon Materials for Energy-Related Applications
by: Sani, Suleiman
Published: (2023)
by: Sani, Suleiman
Published: (2023)
The development of activated carbon from biomass precursors
by: Gill, Andrew
Published: (2017)
by: Gill, Andrew
Published: (2017)
Factors that Determine the Performance of Carbon Fuels in the Direct Carbon Fuel Cell
by: Li, X., et al.
Published: (2008)
by: Li, X., et al.
Published: (2008)
Synthesis and characterisation of porous carbons with optimised properties for targeted sustainable energy applications
by: Alali, I.K
Published: (2023)
by: Alali, I.K
Published: (2023)
Development of durian peel-based adsorbent for zinc and lead ions removal
by: Ngabura, Mohammed
Published: (2020)
by: Ngabura, Mohammed
Published: (2020)
Potassium and zeolitic structure modified ultra-microporous adsorbent materials from a renewable feedstock with favourable surface chemistry for CO2 capture
by: LIU, Xin, et al.
Published: (2017)
by: LIU, Xin, et al.
Published: (2017)
Leakage and atmospheric dispersion of CO2 associated with carbon capture and storage projects
by: Mazzoldi, Alberto
Published: (2009)
by: Mazzoldi, Alberto
Published: (2009)
Isotherm And Kinetics Of Reactive Dye Adsorption On Palm Kernel Shell-Based Activated Carbon
by: Mobarekeh, Mohsen Nourouzi
Published: (2007)
by: Mobarekeh, Mohsen Nourouzi
Published: (2007)
Biomass-derived activated carbon for energy storage applications
by: Altwala, Afnan
Published: (2022)
by: Altwala, Afnan
Published: (2022)
Preparation and characterization of activated carbon
by: Badri, M., et al.
Published: (1990)
by: Badri, M., et al.
Published: (1990)
Immobilization of carbonic anhydrase enzyme into solid support for sequestration of carbon dioxide / Siti Nadia Abdullah
by: Abdullah, Siti Nadia
Published: (2018)
by: Abdullah, Siti Nadia
Published: (2018)
Similar Items
-
Process simulations of post-combustion CO2 capture for coal and natural gas-fired power plants using a polyethyleneimine/silica adsorbent
by: Zhang, Wenbin, et al.
Published: (2017) -
Parametric study on the regeneration heat requirement of an amine-based solid adsorbent process for post-combustion carbon capture
by: Zhang, Wenbin, et al.
Published: (2016) -
Performance of polyethyleneimine–silica adsorbent for post-combustion CO2 capture in a bubbling fluidized bed
by: Zhang, Wenbin, et al.
Published: (2014) -
Development and performance evaluation of alkali-intercalated nano-porous carbons materials from waste plastics for CO2 capture applications
by: Alamro, Mohammed
Published: (2025) -
High density and super ultra-microporous-activated carbon macrospheres with high volumetric capacity for CO2 capture
by: Liu, Jingjing, et al.
Published: (2017)