The control and maintenance of desired flow patterns in bends of different orientations

QR Code

The control and maintenance of desired flow patterns in bends of different orientations

Multiphase flows are common in industrial settings and bends in pipe lines cannot be avoided due to space limitations. Gas-liquid two phase flows could form material discontinuities that could have adverse effect on productivity and the pipe network due to sudden variations resulting due to the rapi...

Full description

Bibliographic Details
Main Authors:	Zhao, D., Omar, R., Abdulkadir, M., Abdulkareem, Lokman A., Azzi, Abdelwahid, Saidj, Faiza, Hernandez Perez, V., Hewakandamby, Buddhika N., Azzopardi, Barry J.
Format:	Article
Published:	Elsevier 2016
Subjects:	Gas-liquid; bends; void fraction; electrical tomography; conductance
Online Access:	https://eprints.nottingham.ac.uk/37676/

Similar Items

Experimental investigation of air–water two-phase flow through vertical 90° bend
by: Saidj, Faiza, et al.
Published: (2014)

Interrogating the effect of an orifice on the upward two-phase gas–liquid flow behavior
by: Zeghloul, Ammar, et al.
Published: (2015)

Persistence of frequency in gas–liquid flows across a change in pipe diameter or orientation
by: Azzopardi, Barry J., et al.
Published: (2014)

Applications of Artificial Neural Network (ANN) method for performance prediction of the effect of a vertical 90° bend on an air-silicone oil flow
by: Ayegba, P.O., et al.
Published: (2017)

Characterization Of oil/ gas flow pattern in vertical pipes using electrical capacitance tomography
by: Abdulkareem, Lokman A., et al.
Published: (2015)

Experimental study of the hydrodynamic behaviour of slug flow in a vertical riser
by: Abdulkadir, M., et al.
Published: (2014)

Experimental study of the hydrodynamic behaviour of slug flow in a horizontal pipe
by: Abdulkadir, M., et al.
Published: (2016)

Experimental and computational fluid dynamics (CFD) studies of gas-liquid flow in bends
by: Abdulkadir, Mukhtar.
Published: (2011)

Liquid film thickness behaviour within a large diameter vertical 180° return bend
by: Adbulkadir, M., et al.
Published: (2014)

Fluid structure behaviour in gas-oil two-phase flow in a moderately large diameter vertical pipe
by: Omar, Rajab Abulgasem, et al.
Published: (2018)

Comparison of experimental and Computational Fluid Dynamics (CFD) studies of slug flow in a vertical riser
by: Abdulkadir, M., et al.
Published: (2015)

Bending properties of finger jointed Mahang Gajah (macaranga gigantae) / Muhammad Dhiyauddin Kamaruzaman
by: Kamaruzaman, Muhammad Dhiyauddin
Published: (2016)

Bending Performance of I-Joists from Jointed Oriented Strand Board (OSB) Web and Laminated Veneer Lumber (LVL) Flanges
by: Wan Abdul Rahman, Wan Mohd Nazri
Published: (2000)

Bending properties of Mahang Gajah (macaranga gigantea) by using destructive and non-destructive testing / Nur Aini Zul Bakri
by: Zul Bakri, Nur Aini
Published: (2016)

Characteristics of air/water slug flow in an intermediate diameter pipe
by: Azzopardi, Barry J., et al.
Published: (2015)

Characterisation of an analogue liquid for hydrodynamic studies of gas-ionic liquid flows
by: Azzopardi, Barry J., et al.
Published: (2017)

Bending behaviour of dowelled mortise and tenon joints in Kempas / Rohana Hassan, Azmi Ibrahim and Zakiah Ahmad
by: Hassan, Rohana, et al.
Published: (2008)

Effect of air voids content on thermal properties of asphalt mixtures
by: Hassn, Abdushafi, et al.
Published: (2016)

Transitional two-phase flow around 90° bends of different orientations
by: Omar, Rajab Abulgasem
Published: (2017)

Geopolymer Concrete Columns under Combined Axial Load and Biaxial Bending
by: Rahman, Muhammad, et al.
Published: (2011)

Finite Element Analysis of Spring Back Phenomenon in V- bending of Sheet Metals
by: Imhemed, Ramadan Muftah
Published: (2004)

On the characterisation of polar fibrous composites when fibres resist bending
by: Soldatos, Konstantinos
Published: (2017)

Boundary control of marine risers with bending couplings
by: Nguyen, T., et al.
Published: (2012)

Detection of ionic conductivity and moisture content of various liquids using microwave technique
by: Abd Rahman, Mohd Amiruddin
Published: (2011)

Novel stiffeners exploiting internal pressurisation to enhance buckling behaviour under bending loads
by: Polenta, Valerio, et al.
Published: (2016)

Effects of Initial Moisture Content on Boil Bending Properties of Solid Rubberwood (Hevea Brasiliensis)
by: Choo, Koh Boon
Published: (2001)

Study of the impacts of droplets deposited from the gas core onto a gas-sheared liquid film
by: Cherdantsev, Andrey V., et al.
Published: (2016)

Structures in gas–liquid churn flow in a large diameter vertical pipe
by: Sharaf, Safa, et al.
Published: (2016)

Churn flow in high viscosity oils and large diameter columns
by: Mohammed, Shara K., et al.
Published: (2018)

A cantilever approach to estimate bending stiffness of buildings affected by tunnelling
by: Haji, Twana, et al.
Published: (2018)

Time series properties of liquidation discount
by: Chan, Felix, et al.
Published: (2013)

The properties of large bubbles rising in very viscous liquids in vertical columns
by: Azzopardi, Barry J., et al.
Published: (2014)

Neural Network Model and Finite Element Simulation of Spring back in Plane-Strain Metallic Beam Bending
by: Abu Khadra, Fayiz Y. M.
Published: (2006)

A note on void ratio of fibre-reinforced soils
by: Shukla, S., et al.
Published: (2015)

Factors affecting hydraulic conductivity of asphalt mixture
by: Aboufoul, M., et al.
Published: (2017)

Determination of creep damage properties from miniature thin beam bending using an inverse approach
by: Lu, J., et al.
Published: (2017)

The face bending behaviour of blind-bolted connections to concrete-filled hollow sections
by: Elamin, Ahmed Mohamed Elamin Ahmed
Published: (2014)

A new model based on evolutionary computing for predicting ultimate pure bending of steel circular tubes
by: Shahin, Mohamed, et al.
Published: (2014)

Lumbar spine side bending is reduced in end range extension compared to neutral and end range flexion postures
by: Ebert, Ryan, et al.
Published: (2014)

Effect of large deformation on creep property evaluation by small-specimen bending tests
by: Tu, Shan-Tung, et al.
Published: (2016)