Finite element modelling of the inertia friction welding of a CrMoV alloy steel including the effects of solid-state phase transformations

QR Code

Finite element modelling of the inertia friction welding of a CrMoV alloy steel including the effects of solid-state phase transformations

Finite element (FE) process modelling of the inertia friction welding (IFW) between two tubular CrMoV components has been carried out using the DEFORM-2D (v10.2) software. This model has been validated against experimental test welds of the material; this included process data such as upset and rota...

Full description

Bibliographic Details
Main Author:	Bennett, Chris
Format:	Article
Published:	Elsevier 2015
Subjects:	Inertia friction welding; Finite element; Phase transformations; Residual stress
Online Access:	https://eprints.nottingham.ac.uk/35532/

Similar Items

A sensitivity study of parameters affecting residual stress predictions in finite element modelling of the inertia friction welding process
by: Iracheta, Omar, et al.
Published: (2015)

Characterisation of material property variation across an inertia friction welded CrMoV steel component using the inverse analysis of nanoindentation data
by: Iracheta, Omar, et al.
Published: (2016)

Towards the understanding of the transient behaviour and sources of variability on the process outcomes in inertia friction welding
by: Raimondi, Luca
Published: (2021)

Numerical simulation of residual stresses induced by weld repair in a stainless steel pipe considering the influence of an initial fabrication weld
by: Salerno, Gervasio, et al.
Published: (2016)

Understanding the evolution of superalloy microstructure during inertia friction welding using in-situ x-ray diffraction and cellular automata
by: Rowson, Matthew
Published: (2021)

FE modelling strategies of weld repair in pre-stressed thin components
by: Salerno, Gervasio, et al.
Published: (2016)

Process modelling of weld repair in aeroengine components
by: Salerno, Gervasio
Published: (2018)

Finite element modelling strategies of weld repair in pre-stressed thin components
by: Salerno, Gervasio, et al.
Published: (2016)

On the interaction between welding residual stresses: a numerical and experimental investigation
by: Salerno, Gervasio, et al.
Published: (2018)

Mechanical characterization of AA6061-T6 aluminum alloy friction stir and tungsten arc welded with and without post-weld heat treatment
by: Fadaeifard, Firouz
Published: (2016)

Residual stress analysis and finite element modelling of repair-welded titanium sheets
by: Salerno, G., et al.
Published: (2017)

Corrosion behaviour of friction stir welded lap joints of 6061-t6 aluminum alloy
by: Gharavi, Farhad
Published: (2014)

Investigation of friction stir welding of aluminium alloy and aluminium matrix composites
by: Al-jumaili, Omar Saad salih
Published: (2018)

Modelling of tool wear and metal flow behaviour in friction stir welding (FSW)
by: Hasan, Ahmed Falh
Published: (2016)

A numerical methodology for predicting tool wear in Friction Stir Welding
by: Hasan, Ahmed, et al.
Published: (2017)

A numerical comparison of the flow behaviour in Friction Stir Welding (FSW) using unworn and worn tool geometries
by: Hasan, Ahmed, et al.
Published: (2015)

Friction-stir incremental sheet forming of aluminum alloy and metal matrix composite
by: Azpen, Qasim Mahalhal
Published: (2018)

Neutron strain scanning of fibre and diode laser welds in stainless steel and Ti6Al4V
by: Voisey, K.T., et al.
Published: (2014)

Characterization of 2024-T351 friction stir welding joints
by: Ali, Aidy, et al.
Published: (2006)

An experimental and numerical investigation on the process efficiency of the focused TIG welding of Inconel 718 thick plates
by: Salerno, Gervasio, et al.
Published: (2018)

Finite-element analysis to predict residual stress and strain in press-braked cold-formed steel section
by: Mutafi, Ayad Abdullah Mohammaed
Published: (2020)

Comparative study of permanent magnet-synchronous and permanent magnet-flux switching machines for high torque to inertia applications
by: Al-Timimy, A., et al.
Published: (2017)

Welding parameter optimization using Taguchi method and Grey Relational Analysis for Gas Metal Arc Welding A1008 butt-joint
by: Mattar, Zainal Abidin Shah
Published: (2013)

Linear friction weld process monitoring of fixture cassette deformations using empirical mode decomposition
by: Bakker, Otto Jan, et al.
Published: (2015)

Friction stir spot welded characterization of aluminium alloy 5052-H112 and prediction model using artificial neural network / Armansyah
by: Armansyah, Armansyah
Published: (2020)

Residual stress distribution in a Ti-6Al-4V T-joint weld measured using synchrotron X-ray diffraction
by: Xu, Lei, et al.
Published: (2015)

On the effects of friction modelling on small punch creep test responses: a numerical investigation
by: Cortellino, Francesco, et al.
Published: (2016)

Predicting the welding parameters and deposition geometry of gas metal arc welding process for T-fillet / Mohamad Yazman Yaakub
by: Yaakub, Mohamad Yazman
Published: (2014)

Nonlinear finite element analysis of integral bridge including foundation soil interaction
by: Md. Noh, Mohammad Soffi
Published: (2006)

Investigation of residual stress in selective laser melting
by: Parry, Luke Alexander
Published: (2018)

Evaluation and analysis of various welding imperfections in butt weld collected from industrial fabricators / Muhamad 'Afif Samsudin
by: Samsudin, Muhamad 'Afif
Published: (2009)

The role of geometry changes and debris formation associated with wear on the temperature field in fretting contacts
by: Jin, X., et al.
Published: (2016)

Optimization of textured surface in 2D parallel bearings governed by the Reynolds equation including cavitation and temperature
by: Guzek, Agata, et al.
Published: (2013)

A friction-wear correlation for four-ball extreme pressure lubrication
by: Chan, Chung-Hung, et al.
Published: (2019)

Stresses at weld toes in tubular joints in offshore structures
by: Elliott, Kim S.
Published: (1987)

Optimisation of material properties for the modelling of large deformation manufacturing processes using a finite element model of the Gleeble compression test
by: Bennett, Chris, et al.
Published: (2014)

Development of friction stir welding of plastic using vertical milling machine / Faizul Hj Mat Zain.
by: Mat Zain, Faizul
Published: (2009)

Deformation mechanisms of MMCs under indentation
by: Pramanik, Alokesh, et al.
Published: (2008)

Direct real-time neural evidence for task-set inertia
by: Evans, Lisa H., et al.
Published: (2015)

Investigate on welding distortion, residual stress and metallurgical behavior using fem and experimental study / Mohd Ridhwan Mohammed Redza
by: Mohammed Redza, Mohd Ridhwan
Published: (2016)