Economic assessment of use of pond ash in pavements

QR Code

Economic assessment of use of pond ash in pavements

The paper introduces a new type of industrial waste-based subbase material which can replace conventional subbase material (CSM) in pavement construction. Utilisation of this industrial waste, namely pond coal ash produced from a thermal power plant in road construction will help to reduce the dispo...

Full description

Bibliographic Details
Main Authors:	Sarkar, Raju, Dawson, Andrew
Format:	Article
Published:	2015
Subjects:	Pond ash geotechnical characterization numerical analysis economic assessment
Online Access:	https://eprints.nottingham.ac.uk/34764/

Similar Items

Desalination of reverse osmosis effluent using integrated solar pond with solar still system
by: Al-Musawi, Osamah Abdulhameed Kadhim
Published: (2016)

Effects of information loss in texture details due to the PIFS encoding on load and friction in hydrodynamic bearings
by: Wolski, Marcin, et al.
Published: (2011)

Application of integrated solar pond with evaporation system for heat generation to recover minerals in rejected brine
by: Alrewashed, Abdulsalam Abdullah N.
Published: (2016)

Decision support system for optimal design and operation of ponds for watershed runoff management
by: Al-Ansi, Abdulwahab Mujahed Hasan
Published: (2010)

Directional fractal signature analysis of self-structured surface textures
by: Wolski, Marcin, et al.
Published: (2012)

Water quality characteristics in experimental fish ponds, Malaysia.
by: Md. Yusoff, Fatimah
Published: (1990)

Temporal variations and pond age effect on plankton communities in semi-intensive freshwater marron (Cherax cainii, Austin and Ryan, 2002) earthen aquaculture ponds in Western Australia
by: Tulsankar, Smita Sadanand, et al.
Published: (2021)

Determination of chlorophyrifos lambda cyhalothrin and cypermethrin in Pedu lake / Hermawati Tambeng
by: Tambeng, Hermawati
Published: (2000)

Effects of acid rain on geotechnical properties of tropical residual soils
by: Bakhshipour, Zeinab
Published: (2017)

Geotechnical parameter identification of no-tension elastic–plastic model using extended Kalman filter
by: Yang, C., et al.
Published: (2011)

Dry and wet seasons effect on heavy metals content and sediment grain size in Perlis river / Muhamad Hanif Harif Fadzilah
by: Harif Fadzilah, Muhamad Hanif
Published: (2016)

Improvement in strength properties of ash bricks by bacterial calcite
by: Dhami, N., et al.
Published: (2012)

Directional Multiscale Analysis and Optimization for Surface Textures
by: Podsiadlo, Pawel, et al.
Published: (2013)

Recycled hybrid fiber-reinforced & cement-stabilized pavement mixtures: tensile properties and cracking characterization
by: Farhan, Ahmed Hilal, et al.
Published: (2018)

Influence of stabilisers on the unconfined compressive strength of a fine soil
by: Feng, Mingwei, et al.
Published: (2020)

Relative density correlations are not reliable criteria
by: Hamidi, Babak, et al.
Published: (2013)

Relative density concept is not a reliable criterion
by: Hamidi, Babak, et al.
Published: (2013)

Flexural characteristics of rubberized cement-stabilized crushed aggregate for pavement structure
by: Farhan, Ahmed Hilal, et al.
Published: (2015)

Coal ash foamed bricks stabilised with hydrated lime-activated GGBS (HL-GGBS) / Mohamad Ezad Hafez Mohd Pahroraji
by: Mohd Pahroraji, Mohamad Ezad Hafez
Published: (2017)

Investigations into the effectiveness of fly ash and fruit seed based ash for the removal of boron from seawater
by: Ahmed, Roxanne Nahar
Published: (2011)

Fly ash-based geopolymer concrete
by: Rangan, B. Vijaya
Published: (2008)

Oxy-fuel combustion ash formation mechanisms
by: Zhang, L., et al.
Published: (2010)

Assessing the suitability of three Australian fly ashes as an aluminosilicate source for geopolymers in high temperature applications
by: Rickard, William, et al.
Published: (2011)

The impact of ash pellet characteristics and pellet processing parameters on ash fusion behaviour
by: Daley, Patrick James, et al.
Published: (2019)

Performance of concrete grout under aggressive chloride environment in Sabah
by: Imbin, S., et al.
Published: (2013)

Hierarchical-information-based characterization of multiscale structured surfaces
by: Cheung, Chi Fai, et al.
Published: (2018)

Laboratory Investigation on the Effect of Fly Ash on the Compressibility of Soil
by: Amiralian, S, et al.
Published: (2012)

Development of a visualization model for detecting fractures in Kuala Lumpur limestone for geological engineering purposes
by: Mohamed Elmahdy, Samy Ismail Mohamed
Published: (2012)

A Review on The Lime and Fly ash Application in Soil Stabilization
by: Amiralian, Saeid, et al.
Published: (2012)

Effect of Nano Silica and Ultrafine Fly Ash on Compressive Strength of High Volume Fly Ash Mortar
by: Supit, S., et al.
Published: (2013)

The use of coal ash from power plants as a soil conditioner
by: Sanga, Hilda Gerald
Published: (2019)

Use of Fly Ash in Combination with Bauxite Residue in Sustainable Concrete Manufacture
by: Wahyuni, A., et al.
Published: (2014)

Manufacture of Low-Grade Zeolites from Fly Ash for Fertiliser Applications
by: Fansuri, Hamzah, et al.
Published: (2008)

Development and Properties of Low-Calcium Fly Ash-Based Geopolymer Concrete
by: Hardjito, Djwantoro, et al.
Published: (2005)

Performance of solid and cellular structured fly ash geopolymers exposed to a simulated fire
by: Rickard, William, et al.
Published: (2013)

Generating topologies using edges and vertices in graphs and some applications
by: Abdu, Khalid Abdulkalek
Published: (2018)

Low-Calcium fly ash-based geopolymer concrete: Reinforced beams and columns
by: Sumajouw, Marthin, et al.
Published: (2006)

Low-Calcium fly ash-based geopolymer concrete: Long-term properties
by: Wallah, Steenie, et al.
Published: (2006)

Effects of nano TiO2 on properties of rice husk ash mortars
by: Noorvand, Hassan
Published: (2013)

Durability of conrete using fly ash as a partial replacement of cement
by: Nath, Pradip
Published: (2010)