The linear inverse problem in energy beam processing with an application to abrasive waterjet machining

QR Code

The linear inverse problem in energy beam processing with an application to abrasive waterjet machining

The linear inverse problem for energy beam processing, in which a desired etched profile is known and a trajectory of the beam that will create it must be found, is studied in this paper. As an example, abrasive waterjet machining (AWJM) is considered here supported by extensive experimental investi...

Full description

Bibliographic Details
Main Authors:	Guillerna, A. Bilbao, Axinte, Dragos A., Billingham, John
Format:	Article
Published:	Elsevier 2015
Subjects:	Inverse problem Controlled depth etching Energy beam Abrasive waterjet machining
Online Access:	https://eprints.nottingham.ac.uk/34680/

Similar Items

Stochastic simplified modelling of abrasive waterjet footprints
by: Torrubia, P. Lozano, et al.
Published: (2016)

Erosion mechanisms during abrasive waterjet machining: model microstructures and single particle experiments
by: Mieszala, M., et al.
Published: (2017)

On the inverse design of discontinuous abrasive surface to lower friction-induced temperature in grinding: an example of engineered abrasive tools
by: Li, Hao Nan, et al.
Published: (2018)

Waterjet and laser etching: the nonlinear inverse problem
by: Bilbao Guillerna, A., et al.
Published: (2017)

Modelling of abrasive waterjet milled footprints
by: Anwar, Saqib
Published: (2013)

Gouging abrasion test for rock abrasiveness testing
by: Golovanevskiy, Vladimir, et al.
Published: (2008)

New models for energy beam machining enable accurate generation of freeforms
by: Axinte, Dragos A., et al.
Published: (2017)

Hierarchical Bayesian level set inversion
by: Dunlop, Matthew M., et al.
Published: (2016)

Filter based methods for statistical linear inverse problems
by: Iglesias, Marco, et al.
Published: (2017)

Stochastic modelling of abrasive waterjet controlled-depth machining
by: Lozano Torrubia, Pablo
Published: (2016)

Etch Rate and Dimensional Accuracy of Machinable Glass Ceramics in Chemical Etching
by: Ting, Huey Tze, et al.
Published: (2010)

Characterisation of material property variation across an inertia friction welded CrMoV steel component using the inverse analysis of nanoindentation data
by: Iracheta, Omar, et al.
Published: (2016)

Application of rock hardness and abrasive indexing to rock excavating equipment selection
by: Cassapi, V.B.
Published: (1987)

On modelling and experimentation of planar grinding using abrasive pads with grits of defined geometries and distributions for enabling controlled surface texture
by: Zhou, Yuchen
Published: (2018)

New Experimental Rig to Investigate Abrasive–Corrosive Characteristics of Metals in Aqueous Media
by: Salasi, Mobin, et al.
Published: (2010)

Bayesian inversion for Magnetic Resonance Elastography
by: Cejka, Fabian
Published: (2023)

A combined inverse finite element – elastoplastic modelling method to simulate the size-effect in nanoindentation and characterise materials from the nano to micro-scale
by: Chen, X., et al.
Published: (2017)

Abrasive wear behaviour of conventional and large-particle tungsten carbide-based cermet coatings as a function of abrasive size and type
by: Kamdi, Z., et al.
Published: (2011)

Inverse optimal filtering of linear distributed parameter systems
by: Do, Khac Duc
Published: (2013)

Quantifying uncertainty in thermophysical properties of walls by means of Bayesian inversion
by: De Simon, Lia, et al.
Published: (2018)

Behaviour of externally prestressed beams
by: Chan, Kim Liang
Published: (2004)

Non-Linear Analysis Of Reinforced And Pre-Stressed Concrete Beams
by: Hamed, Ahmed M.m.
Published: (2002)

Inversion for the Elastic Parameters of Layered Transversely Isotropic Media
by: Li, Ruiping
Published: (2002)

A Bayesian level set method for geometric inverse problems
by: Iglesias, Marco, et al.
Published: (2016)

Inverse optimal control of linear distributed parameter systems
by: Do, Khac Duc
Published: (2014)

Determination of creep damage properties from miniature thin beam bending using an inverse approach
by: Lu, J., et al.
Published: (2017)

Pulsed laser ablation as a tool for in-situ balancing of rotating parts
by: Stoesslein, M., et al.
Published: (2016)

Optimization of cutting parameters of sugar palm fiber- reinforced unsaturated polyester composite with laser beam and abrasive water jet cutting technologies
by: Masoud, Fathi Aluhishi Muftah
Published: (2023)

Assembly meshing of abrasive waterjet nozzle erosion simulation
by: Naqib Hakim, Kamarudin, et al.
Published: (2017)

Dressing tools with controlled abrasive grain population for grinding aerospace materials
by: Spampinato, Alessio
Published: (2018)

Investigation of the wear progression of nozzle in abrasive waterjet machining with different abrasive material
by: Lusi, Nuraini, et al.
Published: (2025)

The effect of finger joint profile and orientation on the strength properties of Timber beam for selected Malaysian timber species / Mohd Azran Razlan
by: Razlan, Mohd Azran
Published: (2016)

Service Limit Criteria for Deflection and Cracking in Partially Prestressed Beams
by: Alam, Khondaker Shamsul
Published: (1985)

Seismic processing, inversion, and AVO for gold exploration: Case study from Western Australia
by: Harrison, C., et al.
Published: (2012)

Performance analysis of abrasive waterjet machining process at low pressure
by: M., Murugan, et al.
Published: (2018)

Kalman-like Inversion with ODE/SDE Formulations and Adaptive Algorithms
by: Yang, Yuchen
Published: (2020)

Simply-supported multi-layered beams for energy harvesting
by: Patel, Rupesh, et al.
Published: (2017)

Investigation on the effect of abrasive waterjet parameter on machining stainless steel
by: Hafiz, Husin, et al.
Published: (2020)

Statistical evaluation of a machine learning model as shear strength prediction on reinforced concrete beam
by: Mohammed, Mohammed Hayder Riyadh
Published: (2022)

Mechanical durability of superhydrophobic surfaces: the role of surface modification technologies
by: Zhi, Jing-Hui, et al.
Published: (2017)