The role of geometry changes and debris formation associated with wear on the temperature field in fretting contacts

QR Code

The role of geometry changes and debris formation associated with wear on the temperature field in fretting contacts

The temperature of a fretting contact is known to be a key factor in its development. However, as a test proceeds, the wear scar changes, both geometrically and through the formation of oxide-based debris-beds. Accordingly, the effects of these on the near-surface temperature field resulting from fr...

Full description

Bibliographic Details
Main Authors:	Jin, X., Sun, Wei, Shipway, P.H.
Format:	Article
Published:	Elsevier 2016
Subjects:	Frictional heating; Stainless steel; 304; Finite element modelling; FE
Online Access:	https://eprints.nottingham.ac.uk/34140/

Similar Items

The role of frictional power dissipation (as a function of frequency) and test temperature on contact temperature and the subsequent wear behaviour in a stainless steel contact in fretting
by: Jin, X., et al.
Published: (2015)

Material characterization and finite element modelling of cyclic plasticity behavior for 304 stainless steel using a crystal plasticity model
by: Lu, Jiawa, et al.
Published: (2016)

The influence of surface hardness on the fretting wear of steel pairs: its role in debris retention in the contact
by: Lemm, J.D., et al.
Published: (2014)

Fretting wear mapping: the influence of contact geometry and frequency on debris formation and ejection for a steel-on-steel pair
by: Warmuth, A.R., et al.
Published: (2015)

Derivation of a wear scar geometry-independent coefficient of friction from fretting loops exhibiting non-Coulomb frictional behaviour
by: Jin, X., et al.
Published: (2016)

Wear properties of paste boronized 316 stainless steel before and after shot blasting process / Muhamad Hafizuddin Mohamad Basir, Bulan Abdullah and Siti Khadijah Alias
by: Mohamad Basir, Muhamad Hafizuddin, et al.
Published: (2014)

Effects of surface roughness on local friction and temperature distributions in a steel-on-steel fretting contact
by: Qin, W., et al.
Published: (2018)

Evolution of damage in MoS2-based dry film lubricants (DFLs) in fretting wear – the effect of DFL thickness and contact geometry
by: Barman, K., et al.
Published: (2017)

The study on expanded austenite formation of duplex stainless steels treated by low temperature carburizing in a tube furnace atmosphere / Nor Farhana Mohd Yusof
by: Mohd Yusof, Nor Farhana
Published: (2012)

Investigation on the plasticity accumulation of Ti-6Al-4V fretting wear by decoupling the effects of wear and surface profile in finite element modelling
by: Tobi, A.L. Mohd, et al.
Published: (2016)

The role of debris in fretting: investigation into the interrelated effects of displacement amplitude and frequency in fretting wear
by: Kirk, Adam
Published: (2021)

On the effects of friction modelling on small punch creep test responses: a numerical investigation
by: Cortellino, Francesco, et al.
Published: (2016)

Damage mechanics based predictions of creep crack growth in 316 stainless steel
by: Hyde, Christopher J., et al.
Published: (2010)

The role of temperature and frequency on fretting wear of a like-on-like stainless steel contact
by: Jin, X., et al.
Published: (2017)

The roles of contact conformity, temperature and displacement amplitude on the lubricated fretting wear of a steel-on-steel contact
by: Warmuth, A.R., et al.
Published: (2016)

Pitting corrosion resistance with shielded metal arc welding and post weld heat treatment on duplex stainless steel weld overlay
by: Sim, Bernard Maxmillan
Published: (2019)

Chip formation mechanism and machinability of wrought duplex stainless steel alloys
by: Nomani, J., et al.
Published: (2015)

Synthesis and characterization of titanium-based metallic glass biocomposite film for surface modification of 316L stainless steel implant
by: Bidabad, Mohsen Saraf
Published: (2012)

Injection moulding of 316L stainless steel powder using palm stearin based binder system / Istikamah Subuki
by: Subuki, Istikamah
Published: (2010)

Experimental determination of creep fatigue life of 316L stainless steel pipe
by: Mohammad, Khairul Azhar
Published: (2011)

Synthesis of different layers of graphene on stainless steel using the CVD method
by: Ghaemi, Ferial, et al.
Published: (2016)

A sensitivity study of parameters affecting residual stress predictions in finite element modelling of the inertia friction welding process
by: Iracheta, Omar, et al.
Published: (2015)

Finite element modelling of the inertia friction welding of a CrMoV alloy steel including the effects of solid-state phase transformations
by: Bennett, Chris
Published: (2015)

The effect of nitriding on the fretting wear of a high strength steel at ambient and elevated temperatures
by: Pearson, Stephen R.
Published: (2013)

Multiaxial viscoplasticity modelling of power plant steel
by: Saad, Abdullah Aziz, et al.
Published: (2016)

Use of electrochemical techniques to determine the effect of Sigma (σ)-phase precipitation on a 25 wt% Cr Super Duplex Stainless Steel.
by: Næss, M, et al.
Published: (2015)

Evaluation of the effects of seawater ingress into 316L lined pipes on corrosion performance
by: Machuca, Laura, et al.
Published: (2014)

A model for the role of debris ejection in development of fretting wear
by: Zhu, Tengtuo
Published: (2022)

Finite-element analysis to predict residual stress and strain in press-braked cold-formed steel section
by: Mutafi, Ayad Abdullah Mohammaed
Published: (2020)

Numerical solution for one dimensional thermal problems using the finite element method / Hisham Md. Basir
by: Md. Basir, Hisham
Published: (2002)

A numerical comparison of the flow behaviour in Friction Stir Welding (FSW) using unworn and worn tool geometries
by: Hasan, Ahmed, et al.
Published: (2015)

Evolution of plasticity-based wear damage in gross sliding fretting of a Ti-6Al-4V non-conforming contact
by: Mohd Tobi, A.L., et al.
Published: (2017)

Evolution of plasticity-based wear damage in gross sliding fretting of a Ti-6Al-4V non-conforming contact
by: Mohd Tobi, A.L., et al.
Published: (2017)

A numerical methodology for predicting tool wear in Friction Stir Welding
by: Hasan, Ahmed, et al.
Published: (2017)

Monitoring and disinfection of biofilm-associated sulfate reducing bacteria on different substrata in a simulated recirculating cooling tower system
by: Ilhan Sungur, E., et al.
Published: (2010)

Effect of oxygen and biofilms on crevice corrosion of UNS S31803 and UNS N08825 in natural seawater
by: Machuca, Laura, et al.
Published: (2013)

Experimental and thermodynamic investigations on the chlorine-induced corrosion of HVOF thermal sprayed NiAl coatings and 304 stainless steels at 700 °C
by: Bai, Mingwen, et al.
Published: (2018)

Injection Molding of Stainless Steel (SUS 316L) Powder Using a Thermoplastic Binder System
by: Ibrahim, Rosdi
Published: (2002)

Deflection behavior of small diameter steel piles model in FEM analysis for landslide countermeasure
by: Mujah, Donovan, et al.
Published: (2013)

Contact line instabilities of rotating, viscous droplets
by: Roper, Tom William
Published: (2024)