$Finite element modelling of the effect of temperature and neutron dose on the fracture behaviour of nuclear reactor graphite bricks$
QR Code

QR Code

Finite element modelling of the effect of temperature and neutron dose on the fracture behaviour of nuclear reactor graphite bricks

Graphite moderator bricks used within many UK gas-cooled nuclear reactors undergo harsh temperature and radiation gradients. They cause changes in material properties of graphite over extended periods of time. Consequently, models have been developed in order to understand and predict the complex st...

Full description

Bibliographic Details
Main Authors:	Wadsworth, M., Kyaw, Si Thu, Sun, Wei
Format:	Article
Published:	Elsevier 2014
Online Access:	https://eprints.nottingham.ac.uk/33819/

Similar Items

Modelling fracture of aged graphite bricks under radiation and temperature
by: Hashim, Atheer, et al.
Published: (2017)

Effects of compositions of filler, binder and porosity on elastic and fracture properties of nuclear graphite
by: Kyaw, Si Thu, et al.
Published: (2015)

Finite element modelling of stresses and failure within plasma spray thermal barrier coating systems
by: Kyaw, Si Thu
Published: (2013)

Effects of compositions of filler, binder and porosity on elastic and fracture properties of nuclear graphite
by: Sun, Wei
Published: (2015)

Study of boron neutron capture therapy components at thermal column for nuclear reactor
by: Safwan, Shalbi
Published: (2023)

Thermoluminescent characterization and defect studies of graphite-rich media under high dose neutron exposure
by: Khandaker, Mayeen Uddin *, et al.
Published: (2023)

Finite element analysis on pepper brick strength
by: Loh, E.K
Published: (2009)

Measurement of neutron flux and gamma dose rate distribution inside a water phantom for Boron Neutron Capture Therapy study at Dalat Research Reactor
by: Trinh, Thi Tu Anh, et al.
Published: (2019)

Finite element modelling of damage fracture and fretting fatigue
by: Wahab, M. Abdel, et al.
Published: (2012)

Finite element modelling of structural clay brick masonry subjected to axial compression
by: Bakhteri, Jahangir, et al.
Published: (2004)

Neutron Activation Analysis and its Application in Malaysian Nuclear Agency
by: Wee, Boon Siong
Published: (2013)

Nuclear reactor materials at the atomic scale
by: Marquis, E., et al.
Published: (2009)

Analysis of connecting rod fracture using finite element analysis
by: Ahmad Ridzuan, Ibrahim
Published: (2010)

MCNP Dose Analysis for the Iranian Plasma Focus Neutron Source
by: Noonbede, Masome, et al.
Published: (2015)

Development of ko-standardization method for reactor neutron activation analysis
by: Ibrahim Abugassa,, et al.
Published: (1996)

Buckle, ruck and tuck: A proposed new model for the response of graphite to neutron irradiation
by: Heggie, M., et al.
Published: (2011)

An enhanced scaled boundary finite element method for linear elastic fracture
by: Egger, Adrian W., et al.
Published: (2017)

Fracture toughness of railway track material using finite element analysis
by: Mohd Nurul Akmal, Mohd Yusof
Published: (2010)

Biomechanical study of vertebral compression fracture using finite element analysis
by: Hiromitsu, Takano, et al.
Published: (2017)

Determination Of Strength And Deformability Of Fractured Rock Mass By Finite Elemental Modelling
by: Aminuddin, Emirol Amri
Published: (2017)

Numerical modelling of MPA-CVD reactors with the discontinuous Galerkin finite element method
by: Houston, Paul, et al.
Published: (2017)

The scaled boundary finite element method for the efficient modeling of linear elastic fracture
by: Egger, Adrian W., et al.
Published: (2016)

Determination Of Fracture Toughness In PBGA Packages Using Finite Element And Experimental Methods
by: Tan, Chew Pheng
Published: (2006)

Trimon: An Efficient Multigroup Monte Carlo Neutron Transport Code For Triga Reactors
by: Omar, Muhammad Rabie
Published: (2020)

Comment on “Increase in specific heat and possible hindered rotation of interstitial C2 moleculesin neutron-irradiated graphite”
by: Latham, C., et al.
Published: (2010)

Response of fabricated germanium optical fibre subjected to low dose neutron-gamma irradiation
by: Mustafa, Salasiah, et al.
Published: (2018)

Determination of neutron flux parameters in PUSPATI TRIGA Mark II Research Reactor, Malaysia
by: I. A., Alnour, et al.
Published: (2013)

Effect of non-uniform reactor cooling on fracture and constraint of a reactor pressure vessel
by: Qian, Guian, et al.
Published: (2018)

Finite element analysis of osteoporotic vertebrae with first lumbar (L1) vertebral compression fracture
by: Mazlan, M. H., et al.
Published: (2014)

Finite element analysis of combined fracture and delamination on coated substrate under normal and tangential loading
by: Mohsin, Mohamad Lokman
Published: (2018)

Current Sudan protective practice in diagnostic nuclear medicine and patient dose
by: Edam, A.N., et al.
Published: (2021)

Sliding wear analysis of cobalt based alloys in nuclear reactor conditions
by: McCarron, Ruby, et al.
Published: (2017)

CFD modeling of performance enhancement for nuclear research reactor cooling system
by: Darmawan, Rosli
Published: (2015)

Neutron source and neutron shielding
by: Che Omar, Nuurul Iffah, et al.
Published: (2011)

Mechanical performance of lightweight brick at elevated temperature
by: Adnan, Suraya Hani, et al.
Published: (2021)

Thermal neutron flux measurement at pneumatic transfer system (pts) of reactor triga puspati (rtp) using neutron activation analysis (naa) / Nur Zarifah Zahali
by: Zahali, Nur Zarifah
Published: (2017)

Development of a special interface element between brick and plate bending elements
by: Kohnehpooshi, Omid, et al.
Published: (2011)

The power level control of a pressurised water reactor nuclear power plant
by: Mahendra Kumar, Jothi Letchumy, et al.
Published: (2020)

Development of 3D CFD simulation method in nuclear reactor safety analysis
by: Darmawan, Rosli, et al.
Published: (2012)

Elemental Analysis via Prompt Gamma Neutron Activation for Diamond Drilling
by: Petrovic, Snezana
Published: (2021)