Mechanical properties of Ti-6Al-4V selectively laser melted parts with body-centred-cubic lattices of varying cell size

QR Code

Mechanical properties of Ti-6Al-4V selectively laser melted parts with body-centred-cubic lattices of varying cell size

Significant weight savings in parts can be made through the use of additive manufacture (AM), a process which enables the construction of more complex geometries, such as functionally graded lattices, than can be achieved conventionally. The existing framework describing the mechanical properties of...

Full description

Bibliographic Details
Main Authors:	Maskery, Ian, Aremu, Adedeji, Simonelli, M., Tuck, Christopher, Wildman, Ricky D., Ashcroft, Ian, Hague, Richard J.M.
Format:	Article
Published:	Springer 2015
Subjects:	Selective laser melting Lattice Titanium alloy Additive manufacture Lightweight structures
Online Access:	https://eprints.nottingham.ac.uk/31973/

Similar Items

A mechanical property evaluation of graded density Al-Si10-Mg lattice structures manufactured by selective laser melting
by: Maskery, Ian, et al.
Published: (2016)

Compressive failure modes and energy absorption in additively manufactured double gyroid lattices
by: Maskery, Ian, et al.
Published: (2018)

Improving the fatigue behaviour of a selectively laser melted aluminium alloy: influence of heat treatment and surface quality
by: Aboulkhair, Nesma T., et al.
Published: (2016)

An investigation into reinforced and functionally graded lattice structures
by: Maskery, Ian, et al.
Published: (2016)

On the formation of AlSi10Mg single tracks and layers in selective laser melting: microstructure and nano-mechanical properties
by: Aboulkhair, Nesma T., et al.
Published: (2016)

Quantification and characterisation of porosity in selectively laser melted Al–Si10–Mg using x-ray computed tomography
by: Maskery, Ian, et al.
Published: (2016)

Fractal scan strategies for selective laser melting of ‘unweldable’ nickel superalloys
by: Catchpole-Smith, S., et al.
Published: (2017)

Nanoindentation shows uniform local mechanical properties across melt pools and layers produced by selective laser melting of AlSi10Mg alloy
by: Everitt, Nicola M, et al.
Published: (2016)

Insights into the mechanical properties of several triply periodic minimal surface lattice structures made by polymer additive manufacturing
by: Maskery, Ian, et al.
Published: (2017)

Design optimization for an additively manufactured automotive component
by: Abdi, Meisam, et al.
Published: (2018)

Understanding the effect of laser scan strategy on residual stress in selective laser melting through thermo-mechanical simulation
by: Parry, L., et al.
Published: (2016)

Reducing porosity in AlSi10Mg parts processed by selective laser melting
by: Aboulkhair, Nesma T., et al.
Published: (2014)

Shape complexity and process energy consumption in electron beam melting: a case of something for nothing in additive manufacturing?
by: Baumers, Martin, et al.
Published: (2016)

Machining of metal directed energy deposited components
by: Oyelola, Olusola
Published: (2020)

A voxel-based method of constructing and skinning conformal and functionally graded lattice structures suitable for additive manufacturing
by: Aremu, Adedeji, et al.
Published: (2016)

A comparison of Ti-6Al-4V in-situ alloying in Selective Laser Melting using simply-mixed and satellited powder blend feedstocks
by: Simonelli, Marco, et al.
Published: (2018)

The microstructure and mechanical properties of selectively laser melted AlSi10Mg: The effect of a conventional T6-like heat treatment
by: Aboulkhair, Nesma T., et al.
Published: (2016)

Thermal properties of lattice structures by laser powder bed fusion for aerospace systems
by: SÉLO, Richard Roger Joachim
Published: (2022)

Predicting melt pool behaviour in LPBF through high fidelity modelling
by: Reynolds, William J.
Published: (2022)

Design of mechanically-optimised lattice structures for vibration isolation
by: Syam, Wahyudin P., et al.
Published: (2017)

Refinement of the grain structure of selective laser melted Ti-6Al-4V via induction heat treatment
by: Zou, Zhiyi
Published: (2020)

Design and analysis of strut-based lattice structures for vibration isolation
by: Syam, Wahyudin P., et al.
Published: (2017)

Study on lattice structures using additive manufacturing and its application on a new ultra-lightweight vehicle suspension system
by: Niu, Jie
Published: (2017)

Processing of open-cell structures by additive manufacturing technique of metal and salt mixtures
by: Zhao, Ge
Published: (2020)

Effect of the build orientation on the mechanical properties and fracture modes of SLM Ti–6Al–4V
by: Simonelli, Marco, et al.
Published: (2014)

Metallurgy of high-silicon steel parts produced using selective laser melting
by: Garibaldi, Michele, et al.
Published: (2016)

Electrical resistivity of additively manufactured AlSi10Mg for use in electric motors
by: Silbernagel, Cassidy, et al.
Published: (2018)

Strategies for functionally graded lattice structures derived using topology optimisation for additive manufacturing
by: Panesar, Ajit, et al.
Published: (2018)

Numerical study on load-bearing capabilities of beam-like lattice structures with three different unit cells
by: Niu, Jie, et al.
Published: (2017)

Spatially resolved acoustic spectroscopy for selective laser melting
by: Smith, Richard J., et al.
Published: (2016)

A study on the laser spatter and the oxidation reactions during selective laser melting of 316L stainless steel, Al-Si10-Mg, and Ti-6Al-4V
by: Simonelli, Marco, et al.
Published: (2015)

In-situ boron-induced grain refinement and its impact on the metallurgical and mechanical properties of Ti6Al4V alloy processed by laser powder bed fusion
by: Hizli, Huseyin
Published: (2025)

Machining of additively manufactured parts: implications for surface integrity
by: Oyelola, Olusola, et al.
Published: (2016)

Design framework for multifunctional additive manufacturing: coupled optimization strategy for structures with embedded functional systems
by: Panesar, Ajit, et al.
Published: (2017)

Investigation of PBF-LB stainless steels and lattice structures for crashworthiness applications
by: Della Crociata, Diego
Published: (2025)

The growth of short fatigue cracks in titanium and aluminium alloys
by: Bolingbroke, Richard Kendall
Published: (1988)

The effect of fretting conditions on the lifetime of aero-engine dry film lubricants systems
by: Laolu-Balogun, Emmanuel
Published: (2023)

Failure mechanism of foamed concrete made with/without additives and lightweight aggregate
by: Hilal, Ameer Abdulrahman, et al.
Published: (2016)

Functionalisation of Ti6Al4V components fabricated using selective laser melting with a bioactive compound
by: Vaithilingam, Jayasheelan, et al.
Published: (2015)

Abrasive water-jet: controlled depth milling of titanium alloys
by: Fowler, Gary
Published: (2003)