The role of frictional power dissipation (as a function of frequency) and test temperature on contact temperature and the subsequent wear behaviour in a stainless steel contact in fretting

QR Code

The role of frictional power dissipation (as a function of frequency) and test temperature on contact temperature and the subsequent wear behaviour in a stainless steel contact in fretting

Temperature is known to affect the fretting wear behaviour of metals; generally, a critical temperature is observed, above which there are substantial reductions in wear rate, with these being associated with the development of protective oxide beds in the fretting contact. This work has examined th...

Full description

Bibliographic Details
Main Authors:	Jin, X., Shipway, P.H., Sun, W.
Format:	Article
Published:	Elsevier 2015
Subjects:	Fretting wear Contact temperature Stainless steel Frequency Debris
Online Access:	https://eprints.nottingham.ac.uk/30754/

Similar Items

The role of temperature and frequency on fretting wear of a like-on-like stainless steel contact
by: Jin, X., et al.
Published: (2017)

Fretting wear mapping: the influence of contact geometry and frequency on debris formation and ejection for a steel-on-steel pair
by: Warmuth, A.R., et al.
Published: (2015)

The influence of surface hardness on the fretting wear of steel pairs: its role in debris retention in the contact
by: Lemm, J.D., et al.
Published: (2014)

The role of debris in fretting: investigation into the interrelated effects of displacement amplitude and frequency in fretting wear
by: Kirk, Adam
Published: (2021)

The roles of contact conformity, temperature and displacement amplitude on the lubricated fretting wear of a steel-on-steel contact
by: Warmuth, A.R., et al.
Published: (2016)

Effects of surface roughness on local friction and temperature distributions in a steel-on-steel fretting contact
by: Qin, W., et al.
Published: (2018)

The role of geometry changes and debris formation associated with wear on the temperature field in fretting contacts
by: Jin, X., et al.
Published: (2016)

Is the wear coefficient dependent upon slip amplitude in fretting?: Vingsbo and Söderberg revisited
by: Pearson, S.R., et al.
Published: (2014)

A model for the role of debris ejection in development of fretting wear
by: Zhu, Tengtuo
Published: (2022)

Derivation of a wear scar geometry-independent coefficient of friction from fretting loops exhibiting non-Coulomb frictional behaviour
by: Jin, X., et al.
Published: (2016)

Evolution of plasticity-based wear damage in gross sliding fretting of a Ti-6Al-4V non-conforming contact
by: Mohd Tobi, A.L., et al.
Published: (2017)

Effect of test conditions on the temperature at which a protective debris bed is formed in fretting of a high strength steel
by: Hayes, E.K., et al.
Published: (2017)

Investigation of the interrelated effects of temperature and frequency on fretting wear
by: Jin, Xiaozhe
Published: (2017)

A combined wear-fatigue design methodology for fretting in the pressure armour layer of flexible marine risers
by: O'Halloran, S.M., et al.
Published: (2017)

The effect of nitriding on the fretting wear of a high strength steel at ambient and elevated temperatures
by: Pearson, Stephen R.
Published: (2013)

Evolution of damage in MoS2-based dry film lubricants (DFLs) in fretting wear – the effect of DFL thickness and contact geometry
by: Barman, K., et al.
Published: (2017)

Investigation on the plasticity accumulation of Ti-6Al-4V fretting wear by decoupling the effects of wear and surface profile in finite element modelling
by: Tobi, A.L. Mohd, et al.
Published: (2016)

Wear properties of paste boronized 316 stainless steel before and after shot blasting process / Muhamad Hafizuddin Mohamad Basir, Bulan Abdullah and Siti Khadijah Alias
by: Mohamad Basir, Muhamad Hafizuddin, et al.
Published: (2014)

An experimental study on the key fretting variables for flexible marine risers
by: O’Halloran, S.M., et al.
Published: (2018)

The study on expanded austenite formation of duplex stainless steels treated by low temperature carburizing in a tube furnace atmosphere / Nor Farhana Mohd Yusof
by: Mohd Yusof, Nor Farhana
Published: (2012)

Fretting damage of high carbon chromium bearing steel
by: Kuno, Masato
Published: (1988)

Fretting wear studies of aeroengine materials
by: Soh, Hian Ping
Published: (2006)

Sliding wear analysis of cobalt based alloys in nuclear reactor conditions
by: McCarron, Ruby, et al.
Published: (2017)

The effect of temperature on wear and friction of a high strength steel in fretting
by: Pearson, S.R., et al.
Published: (2013)

Synthesis and characterization of titanium-based metallic glass biocomposite film for surface modification of 316L stainless steel implant
by: Bidabad, Mohsen Saraf
Published: (2012)

Development of dry film lubricants for highly loaded contacts
by: Barman, Kanika
Published: (2016)

Synthesis of different layers of graphene on stainless steel using the CVD method
by: Ghaemi, Ferial, et al.
Published: (2016)

Representative fretting fatigue testing and prediction for splined couplings
by: Houghton, Dean
Published: (2009)

Experimental determination of creep fatigue life of 316L stainless steel pipe
by: Mohammad, Khairul Azhar
Published: (2011)

Injection moulding of 316L stainless steel powder using palm stearin based binder system / Istikamah Subuki
by: Subuki, Istikamah
Published: (2010)

Chip formation mechanism and machinability of wrought duplex stainless steel alloys
by: Nomani, J., et al.
Published: (2015)

Microstructure formation in the Fe-based hardfacing alloy 5183 and its sliding wear behaviour in high temperature water
by: Carrington, Matthew John
Published: (2021)

A numerical methodology for predicting tool wear in Friction Stir Welding
by: Hasan, Ahmed, et al.
Published: (2017)

The role of a thermally sprayed CuNiIn underlayer in the durability of a dry-film lubricant system in fretting: a phenomenological model
by: Barman, K., et al.
Published: (2018)

Use of electrochemical techniques to determine the effect of Sigma (σ)-phase precipitation on a 25 wt% Cr Super Duplex Stainless Steel.
by: Næss, M, et al.
Published: (2015)

Injection Molding of Stainless Steel (SUS 316L) Powder Using a Thermoplastic Binder System
by: Ibrahim, Rosdi
Published: (2002)

Geometric Kinematics of Point Contact
by: Cui, Lei, et al.
Published: (2010)

Experimental and thermodynamic investigations on the chlorine-induced corrosion of HVOF thermal sprayed NiAl coatings and 304 stainless steels at 700 °C
by: Bai, Mingwen, et al.
Published: (2018)

Investigation of PBF-LB stainless steels and lattice structures for crashworthiness applications
by: Della Crociata, Diego
Published: (2025)

Evolution of plasticity-based wear damage in gross sliding fretting of a Ti-6Al-4V non-conforming contact
by: Mohd Tobi, A.L., et al.
Published: (2017)