A study of open-cell nickel-chrome metallic foam for an abradable compressor sealing

QR Code

A study of open-cell nickel-chrome metallic foam for an abradable compressor sealing

This thesis documents the investigation of open-cell Ni-Cr metallic foams, analysing the mechanical properties of the material as well as the properties of brazed samples. Also investigated was the effectiveness of an ultrasound non-destructive evaluation technique used to analyse braze quality....

Full description

Bibliographic Details
Main Author:	Lindop, Martyn
Format:	Thesis (University of Nottingham only)
Language:	English
Published:	2015
Subjects:	Metal foams Braze quality Abradable seals
Online Access:	https://eprints.nottingham.ac.uk/29065/

Similar Items

Pore-scale numerical investigation of pressure drop behaviour across open-cell metal foams
by: Carvalho, T. P. de, et al.
Published: (2017)

Characterising the influence of material condition and in-service property evolution of an AlSi-PES abradable on blade-casing interactions
by: Lye, Ryan
Published: (2024)

Two-phase flow in open-cell metal foams with application to aero-engine separators
by: Piazera de Carvalho, Thiago
Published: (2016)

An investigation into full-ring radial-gap air-riding seals for aeroengines
by: Kumar, Shubham
Published: (2019)

Advancing the physical chemical understanding of coffee foam
by: Papageorgiou, Christos
Published: (2024)

In-Air Evoked Potential Audiometry of Grey Seals (Halichoerus grypus) from the North and Baltic Seas
by: Ruser, A., et al.
Published: (2014)

An investigation into the Metal Grinding Process under Sub-Zero Temperature Cutting Fluid / Richard P. Daisley and Boppana V. Chowdary
by: Richard, P. Daisley, et al.
Published: (2011)

Identification of fault and top seal effectiveness through an integration of hydrodynamic and capillary analysis techniques
by: Underschultz, James Ross
Published: (2009)

Foamed bitumen stabilised sandstone aggregates
by: Haji Abdul Karim, Roslinah
Published: (2015)

Engineering characterisation of in situ foamed bitumen stabilised pavements
by: Leek, Colin, et al.
Published: (2014)

Soil seal development under simulated rainfall: structural, physical and hydrological dynamics
by: Armenise, Elena, et al.
Published: (2018)

Properties and microstructure of pre-formed foamed concretes
by: Hilal, Ameer Abdulrahman
Published: (2015)

Active filler trials for in situ foamed bitumen stabilised pavements
by: Leek, Colin, et al.
Published: (2014)

Low cost, high integrity plasmatron joining for automotive body in white manufacture
by: Dedenbach, Johannes
Published: (2016)

Effect of Aggregate Fine Contents on Foamed Bitumen Stabilisation
by: Huan, Yue, et al.
Published: (2012)

An experimental investigation of foaming in acidic, high FexO slags
by: Stadler, S., et al.
Published: (2007)

Recovery of Heavy Metals from Chrome - Plating Rinse Wastewater by Reverse Osmosis
by: Keethanchali, Nagaretnam
Published: (1999)

Making sense of the language of peace: its meaning in Iraqi war victims' narratives
by: Salman, Ali Salah
Published: (2020)

Development of a Ceramic Foam Filter for Filtering Molten Aluminum Alloy in Casting Processes
by: Bagherian, Ehsaanreza
Published: (2009)

Synthesis and characterization of alkanolamide polyols for rigid polyurethane foams as potential thermal insulation materials
by: Kamairudin, Norsuhaili
Published: (2024)

CFD modeling and simulation of PEM fuel cell using OpenFOAM
by: Kone, Jean-Paul, et al.
Published: (2018)

Polymerization mechanism, micro-macro properties, and carbonization of polyurethane foams
by: Xu, Jie
Published: (2017)

The Effects of Compaction Methods on Tensile Strength of Foamed Bitumen Mixture
by: Huan, Yue, et al.
Published: (2012)

Comparison of microscale sealed vessel pyrolysis (MSSVpy) and hydropyrolysis (Hypy) for the characterisation of extant and sedimentary organic matter
by: Berwick, Lyndon, et al.
Published: (2010)

Review of the Performance of In-situ Foamed Bitumen Stabilised Pavements in the City ofCanning
by: Leek, Colin
Published: (2011)

A comparison between different foaming methods for the synthesis of light weight geopolymers
by: Masi, G., et al.
Published: (2014)

Impact of CO2 permeation on inter–layers and reservoir caprock sealing efficiency
by: Al Sayah, Ali Farag A
Published: (2025)

The performance of structural foamed concrete with textile reinforcement (TRFC)
by: Ragrag, Abdalla
Published: (2024)

The degradation of plastics & rubbers used in corrosion protection systems
by: Jefferson, Alan, et al.
Published: (2006)

Effects of sulfide minerals on aromatic maturity parameters: Laboratory investigation using micro-scale sealed vessel pyrolysis
by: Holman, Alex, et al.
Published: (2014)

Isolation and foaming functionality of acid-soluble protein from lupin (Lupinus angustifolius) kernels
by: Wong, A., et al.
Published: (2013)

The use of additives to enhance properties of pre-formed foamed concrete
by: Hilal, Ameer Abdulrahman, et al.
Published: (2015)

On void structure and strength of foamed concrete made without/with additives
by: Hilal, Ameer Abdulrahman, et al.
Published: (2015)

Foamed Bitumen Stabilised Pavements towards Western Australia Experience
by: Jitsangiam, Peerapong, et al.
Published: (2012)

Mechanical properties of carbon foams under quasi-static and dynamic loading
by: Li, Z., et al.
Published: (2019)

Characterisation of aquatic natural organic matter by micro-scale sealed vessel pyrolysis
by: Berwick, Lyndon
Published: (2009)

Failure mechanism of foamed concrete made with/without additives and lightweight aggregate
by: Hilal, Ameer Abdulrahman, et al.
Published: (2016)

Rapid offline isotopic characterisation of hydrocarbon gases generated by micro scale sealed vessel pyrolysis
by: Ladjavadi, Mojgan, et al.
Published: (2013)

Effect of solidification rate on pore connectivity of aluminium foams and its consequences on mechanical properties
by: Lázaro, J., et al.
Published: (2016)

On entrained pore size distribution of foamed concrete
by: Hilal, Ameer Abdulrahman, et al.
Published: (2015)