Fretting wear studies of aeroengine materials

QR Code

Fretting wear studies of aeroengine materials

As long as there is a certain degree of flexibility i.e. relative motion, the contacting surface of a mechanical component will experience fretting damage, in the form of fretting wear and/or fretting fatigue, depending on the loading conditions and performance requirements. In the present investiga...

Full description

Bibliographic Details
Main Author:	Soh, Hian Ping
Format:	Thesis (University of Nottingham only)
Language:	English
Published:	2006
Subjects:	Airplanes motors fretting corrosion
Online Access:	https://eprints.nottingham.ac.uk/13177/

Similar Items

Investigation of the interrelated effects of temperature and frequency on fretting wear
by: Jin, Xiaozhe
Published: (2017)

Fretting damage of high carbon chromium bearing steel
by: Kuno, Masato
Published: (1988)

The effect of fretting conditions on the lifetime of aero-engine dry film lubricants systems
by: Laolu-Balogun, Emmanuel
Published: (2023)

Is the wear coefficient dependent upon slip amplitude in fretting?: Vingsbo and Söderberg revisited
by: Pearson, S.R., et al.
Published: (2014)

A combined wear-fatigue design methodology for fretting in the pressure armour layer of flexible marine risers
by: O'Halloran, S.M., et al.
Published: (2017)

Representative fretting fatigue testing and prediction for splined couplings
by: Houghton, Dean
Published: (2009)

Performance analysis of thin surface course systems used in England: a novel approach based on viscous to elastic transition (VET) parameters
by: Khojinian, Arash
Published: (2020)

The influence of surface hardness on the fretting wear of steel pairs: its role in debris retention in the contact
by: Lemm, J.D., et al.
Published: (2014)

The role of temperature and frequency on fretting wear of a like-on-like stainless steel contact
by: Jin, X., et al.
Published: (2017)

The role of debris in fretting: investigation into the interrelated effects of displacement amplitude and frequency in fretting wear
by: Kirk, Adam
Published: (2021)

A model for the role of debris ejection in development of fretting wear
by: Zhu, Tengtuo
Published: (2022)

Fretting wear mapping: the influence of contact geometry and frequency on debris formation and ejection for a steel-on-steel pair
by: Warmuth, A.R., et al.
Published: (2015)

Derivation of a wear scar geometry-independent coefficient of friction from fretting loops exhibiting non-Coulomb frictional behaviour
by: Jin, X., et al.
Published: (2016)

The effect of shot peening on the initiation of fatigue cracks by fretting
by: Leadbeater, G.
Published: (1983)

The roles of contact conformity, temperature and displacement amplitude on the lubricated fretting wear of a steel-on-steel contact
by: Warmuth, A.R., et al.
Published: (2016)

Investigation on the plasticity accumulation of Ti-6Al-4V fretting wear by decoupling the effects of wear and surface profile in finite element modelling
by: Tobi, A.L. Mohd, et al.
Published: (2016)

The role of frictional power dissipation (as a function of frequency) and test temperature on contact temperature and the subsequent wear behaviour in a stainless steel contact in fretting
by: Jin, X., et al.
Published: (2015)

Effects of surface roughness on local friction and temperature distributions in a steel-on-steel fretting contact
by: Qin, W., et al.
Published: (2018)

Evolution of plasticity-based wear damage in gross sliding fretting of a Ti-6Al-4V non-conforming contact
by: Mohd Tobi, A.L., et al.
Published: (2017)

The role of a thermally sprayed CuNiIn underlayer in the durability of a dry-film lubricant system in fretting: a phenomenological model
by: Barman, K., et al.
Published: (2018)

A novel high-precision ground-based aircraft landing system capitalizing on towers trilateration
by: Salih, Ahmad Abbas Al-Ameen
Published: (2013)

Nanoscale ultrasound-switchable FRET based liposomes for near-infrared fluorescence imaging in optically turbid media
by: Zhang, Qimei, et al.
Published: (2017)

Evolution of damage in MoS2-based dry film lubricants (DFLs) in fretting wear – the effect of DFL thickness and contact geometry
by: Barman, K., et al.
Published: (2017)

An experimental study on the key fretting variables for flexible marine risers
by: O’Halloran, S.M., et al.
Published: (2018)

Numerical modelling of the effect of fretting wear on fretting fatigue
by: Madge, Jason John
Published: (2009)

Conceptual design of vertical seat in commercial transport aircraft for static condition flight
by: Mohamad Nor, Ahmad Redzman
Published: (2016)

Development of composite hybridization of kenaf fibre and x-ray film for aerospace ballistic impact applications
by: Rayney Azmi, Ahmad Mustafa
Published: (2018)

Impact of aeroelastic tailoring on flutter performance of variable ribs’ orientation for different wing box model planforms
by: Chan, Ying Nee
Published: (2021)

Power losses in spiral bevel gears
by: Webb, Thomas Andrew.
Published: (2010)

Coconut pulp waste extract (cocos nucifera l.) as corrosion inhibitor for mild steel in 1.0 M acid corrosion
by: Rahim, Norin Hafizah
Published: (2017)

Crevice Corrosion Studies on Corrosion Resistant Alloys in Stagnant Natural Seawater
by: Machuca, Laura, et al.
Published: (2013)

Laser process optimisation for in-situ repair of aero-engine components
by: Gilbert, David Jonathan
Published: (2017)

Conceptual design of a full-standing commercial aircraft seat
by: Mohamad Dasuki, Norhafizah
Published: (2020)

Design and study on fault tolerant permanent magnet starter-generator for more electric aircraft application
by: Wang, Bo
Published: (2023)

Longitudinal aerodynamic characteristics of wau bulan wing-tail configuration with selected airfoil profile
by: Kusumohadi, Catur Setyawan
Published: (2011)

Developments in Aeroengines
by: Owen, J. Michael
Published: (2001)

Microbial Corrosion Resistance of Stainless Steels for Marine Energy Installations
by: Machuca, L., et al.
Published: (2011)

Molecular docking and structure-activity relationship studies on benzothiazole based non-peptidic BACE-1 inhibitors
by: Xu, W., et al.
Published: (2010)

Preparation and characterization of anti-corrosive coatings based on silane functionalized graphene oxide/ epoxy resin nanocomposites
by: Musa, Aujara Kabiru
Published: (2020)

Modelling and stability analysis of aircraft power systems
by: Areerak, Kongpan
Published: (2009)