Tow placement studies for liquid composite moulding

QR Code

Tow placement studies for liquid composite moulding

This thesis describes the work undertaken developing techniques for the design and manufacture of continuous fibre preforms for liquid composite moulding. A prototype tow placement facility based on the roller placement of up to 5 tows onto a flat bed was developed. This was used to prepare preforms...

Full description

Bibliographic Details
Main Author:	Turner, Matthew Richard
Format:	Thesis (University of Nottingham only)
Language:	English
Published:	1998
Subjects:	Polymer composites Composite materials Manufacturing processes Resin transfer moulding
Online Access:	https://eprints.nottingham.ac.uk/12085/

Similar Items

Analysis of the vacuum infusion moulding process
by: Correia, Nuno André Curado Mateus
Published: (2004)

Simulation and validation of injection-compression filling stage of liquid moulding with fast curing resins
by: Martin, Ffion A., et al.
Published: (2018)

Analysis of textile deformation during preforming for liquid composite moulding
by: Wiggers, Joram
Published: (2007)

Modelling the effects of textile preform architecture on permeability
by: Wong, Chee Chiew
Published: (2006)

Compression moulding of hybrid carbon fibre composites for structural applications
by: Corbridge, David Michael
Published: (2018)

A Study on Injection Moulding and Injection Blow Molding Technology
by: Sokkalingam, Rajalingam
Published: (2009)

Modelling and active control of the Vacuum Infusion Process for composites manufacture
by: Modi, Dhiren
Published: (2008)

Characterization of carbon nanotube epoxy composites and carbon nanotubes/laminated carbon fibre epoxy composites
by: Mohd Tamyis, Najihah
Published: (2019)

Flame retardancy study of recycled polymeric foam filled composite building material / Syed Anas Syed Mustafa, Rahmah Mohamed and Lily Soraya Amerudin
by: Syed Mustafa, Syed Anas, et al.
Published: (2015)

Development of material selection expert system for polymer-based composite materials
by: Abd Manab, Mohd Fairuz
Published: (2011)

The dielectric constant (ɛ') and loss tangent (δ) of magnetite (fe3o4) filled thermoplastic natural rubber composite / Farahanis Marudin
by: Marudin, Farahanis
Published: (2017)

Fabrication and characterization of jackfruit seed powder and polyvinyl alcohol blend as biodegradable plastic / Muhamad Faizal Haron
by: Haron, Muhamad Faizal
Published: (2017)

Microstructual Design of Lead Oxide-Epoxy Composites for Radiation Shielding Purposes
by: Noor Azman, N., et al.
Published: (2012)

Gelatin (binder) characterization of jackfruit seed starch for biodegradable plastic fabrication / Nur Hanisah Mohamad
by: Mohamad, Nur Hanisah
Published: (2017)

Dynamic modulus thermal analysis on polymer composite (high density polyethylene with natural rubber) / Sharadina Embong
by: Embong, Sharadina
Published: (2007)

Compression moulding of composites with hybrid fibre architectures
by: Corbridge, D.M., et al.
Published: (2017)

A Preliminary Study on Optimizing Injection Moulding Process by Using Response Surface Method
by: Sokkalingam, Rajalingam
Published: (2009)

Development and characterization of flax/carbon/Kevlar reinforced bio-phenolic/epoxy blends hybrid composites for ballistic helmet
by: Ismail, Ahmad Safwan
Published: (2023)

Polyhydroxybutyrate for improved oil recovery: a literature review / Norrulhuda Mohd Taib, Norfarisha Achim and Zulkafli Hassan
by: Mohd Taib, Norrulhuda, et al.
Published: (2016)

Enhancement of evaluation methodologies for natural fiber composites material selection system
by: Faris Al-Oqla, Faris Mohammed Khair
Published: (2015)

A water-soluble core material for manufacturing hollow composite sections
by: Xiao, Z., et al.
Published: (2017)

Temperature dependence of AC electrical conductivity of PVA-PPy-FeCl3 Composite polymer films
by: Harun, Mohd Hamzah, et al.
Published: (2008)

Impact behaviour of composite plate with embedded piezoelectric sensor
by: Dezfouli, Mohammad Mehdi Salehi
Published: (2011)

A Study On Tungsten-Copper Composites Produced Via Combination Of Liquid Phase Sintering And Liquid Infiltration Techniques
by: Ahmed, Hafed Ibrahim Ihmida
Published: (2014)

Quantification of mesoscale variability and geometrical reconstruction of a textile
by: Gommer, Frank, et al.
Published: (2015)

Understanding the causes and effects of defects in advanced sheet moulding compounds
by: Wilson, Daniel John
Published: (2024)

Low energy impact on the short kenaf fibre reinforced epoxy composites: effect to the residual strength and modulus / Syarifah Yunus … [et al.]
by: Yunus, Syarifah, et al.
Published: (2015)

Development of sugar palm yarn and woven glass fibre-reinforced unsaturated polyester composites
by: Norizan, Mohd Nurazzi
Published: (2018)

High pressure liquid moulding of composites
by: Martin, Ffion A.
Published: (2018)

Process study on composite products / Mohd Shah Rizan Abdul Hafiz and Widia Wahid
by: Abdul Hafiz, Mohd Shah Rizan, et al.
Published: (2003)

Development of low cost, lossy and low dielectric constant OPEFB-HDPE composite material for microwave application
by: Balami, Sunday Dauda
Published: (2017)

Mechanical and thermal properties of short sugar palm (Arenga pinnata MERR.) fibre-reinforced high impact polystrene composites
by: Dandi Bachtiar,
Published: (2012)

Low velocity impact analysis of pineapple leaf/kenaf fibre-reinforced vinyl ester hybrid composites for structural applications
by: Mazlan, Ali Ahmad
Published: (2021)

UNIVERSITI SAINS MALAYSIA Second Semester Examination 2012/2013 Academic Session June 2013 EBP 317/3- Advanced Polymer Composites [Komposit Polimer Termaju] Duration : 3 hours [Masa : 3 jam]
by: Bahan & Sumber Mineral, Pusat Pengajian Kejuruteraan
Published: (2013)

Preparation and characterization of Poly-3-hydroxybutrate/Poly(butylene-adipate-terephthalate) stearate-modified Zn3AI-layered double hydroxide nanocomposites
by: Pak , Yen Leng
Published: (2014)

Advancements in discontinuous carbon fibre composite technologies for high-volume manufacturing processes
by: Xiao, Zhaofei
Published: (2018)

Mechanical and ballistic properties of compressed coir-epoxy composite
by: Omar Baki, Munaim Ali
Published: (2015)

Flexural properties of cellulose nanofibre reinforced green composites
by: Dong, Jonathan, et al.
Published: (2014)

Effect of immersion treatment of fibre on mechanical properties of putruded kenaf vinyl ester composites
by: Mohamad, Nur Marliana
Published: (2016)

Properties of oil palm frond - plastic composite (elaeis guineensis) / Muhammad Hafiz Abd Kadir
by: Abd Kadir, Muhammad Hafiz
Published: (2012)