Treatment of Semi-synthetic Metalworking Fluids: Membrane Filtration and Bioremediation

QR Code

Treatment of Semi-synthetic Metalworking Fluids: Membrane Filtration and Bioremediation

Waste engineering fluids, such as coolants and cutting fluids, are difficult to treat because they have variable physical natures, are particularly toxic and have a very high Chemical Oxygen Demand. The complex and unknown chemical content of the many different products available is also problematic...

Full description

Bibliographic Details
Main Author:	BUSCA, Gerald Thierry Michel
Format:	Thesis (University of Nottingham only)
Language:	English
Published:	2004
Subjects:	Metalworking fluids Metal working Coolant engineering fluids cutting fluid Membrane Filtration ultrafiltration nanofiltration emultions Fouling Gel formation Biological remediation Waste
Online Access:	https://eprints.nottingham.ac.uk/10239/

Similar Items

Investigations into the effects of mass transport and flow dynamics of spacer filled membrane modules using CFD
by: Saeed, Asim, et al.
Published: (2014)

Infrasonic backpulsed membrane cleaning micro-and ultrafiltration membranes fouled with alumina and yeast
by: Shugman, E., et al.
Published: (2013)

Environmental friendly cutting fluids and cooling techniques in machining: a review
by: Debnath, Sujan, et al.
Published: (2014)

Fluid gels: a new feedstock for high viscosity jetting
by: Holland, Sonia, et al.
Published: (2018)

Simulating Plateau-Rayleigh instability and liquid reentrainment in a flow field using a VOF method
by: Mullins, Benjamin, et al.
Published: (2012)

Evaluation of characteristics and performance of fabricated polysulfone/cellulose acetate ultrafiltration membrane
by: Wae Abdulkadir Usin, Wan Aisyah Fadilah
Published: (2018)

Fluid-structure interaction of computational aerodynamics analysis in paravalvular leakage of transcatheter aortic valve implantation patient
by: Basri, Adi Azriff
Published: (2017)

Contact line instabilities of rotating, viscous droplets
by: Roper, Tom William
Published: (2024)

Numerical simulation of the influence of the orifice aperture on the flow around a teeth-shaped obstacle
by: Cisonni, Julien, et al.
Published: (2013)

Removal of Bisphenol A from drinking water using hybrid system of palm kernel shell biosorbent and hematite nanocomposite membrane filtration
by: Katibi, Kamil Kayode
Published: (2023)

A study of hybrid clarification-filtration processes for potable water treatment
by: Price, Robert
Published: (2005)

Analytical solution of boundary layer flow and heat transfer for non-Newtonian fluids and nanofluid
by: Wahid, Nur Syahirah
Published: (2020)

Improving Greywater Quality by Aeration and Membrane Filtration
by: Anwar, Faisal, et al.
Published: (2016)

Semi-permanent expandable hydropower system for river applications in Malaysia
by: Hazmin, Mohd Haniff
Published: (2021)

Flow analysis of water with aluminum oxide nanoparticles in a 90° bend pipe with injection using computational fluid dynamics
by: Mahdizadeh, Hadi
Published: (2018)

Numerical study on effect of vortex generator for t-junction pipe flow
by: Alazemi, Hamad R Dh A S
Published: (2019)

Spherical vortices in rotating fluids
by: Scase, Matthew M., et al.
Published: (2018)

Metamorphic carbon fluxes: How much and how fast?
by: Evans, Katy
Published: (2011)

Turbulent Flow In An Active Wind-Driven Ventilation Device
by: Abolfazl, Sousanabadi Farahani
Published: (2009)

Self built of laboratory scale supercritical anti solvent system
by: Chong, G. H., et al.
Published: (2010)

Computational Analysis of Two-Dimensional Inviscid Flow Around Turbine Cascade Using Gas Kinetic Bhatnagar-Gross-Krook (BGK) Scheme
by: Abdusslam, Saleh Naser
Published: (2004)

Computational fluid dynamic analysis of knock onset in diesel dual-fuel engine
by: Ghiji, Mohammadmahdi
Published: (2011)

Preparation and characterization of magnetite ferrofluid for generating current induced
by: Ahmad, Che Sulaiman
Published: (2014)

Magnetohydrodynamics boundary layer flow of non-newtonian fluid over a permeable shrinking surface
by: Yahaya, Rusya Iryanti
Published: (2019)

Modelling hydro-morpho dynamics of river junctions under the impact of unsubmerged vanes
by: Ali, Hydar Lafta
Published: (2019)

Development of a simple structure of milifluidic impedance-based sensor for speed measurement
by: Ghajar, Masoumeh Asghari
Published: (2019)

Recovery of low lactose goat's milk using cross-flow ultrafiltration membran
by: Zainul Abidin, Nur Sofuwani
Published: (2016)

Treatment of oilfield-produced water using biological and membrane processes
by: Pendashteh, Alireza
Published: (2010)

CFD Modeling of Crossflow Membrane Filtration- Integration of Filtration Model and Fluid Transport Model
by: Khor, E., et al.
Published: (2009)

Boundary shear stress distribution and flow structures in trapezoidal channels
by: Ansari, Kamran
Published: (2011)

Design and optimisation of swirl pipes and transition geometries for slurry transport
by: Ariyaratne, Chanchala
Published: (2005)

Computational modelling of a fluid-conveying flexible channel using oomph-lib
by: Lai, Lawrence, et al.
Published: (2011)

Numerical two-dimensional flexible channel model fixed at both ends for flow-induced instability analysis
by: Lai, Lawrence, et al.
Published: (2010)

Forced convection boundary layer slip flow over a plate in darcy-forchheimer porous medium
by: Abu Bakar, Shahirah
Published: (2014)

The pathophysiology of fluid and electrolyte balance in the older adult surgical patient
by: El-Sharkawy, Ahmed M., et al.
Published: (2013)

High pressure phase equilibria applications involving supercritical fluids
by: Suleiman, Norhidayah
Published: (2016)

Sweat rate and sodium loss during work in the heat
by: Bates, Graham, et al.
Published: (2008)

Simulations of onset of convection in a non-newtonian liquid induced by unsteady-state heat conduction
by: Ting, Kee Chien
Published: (2001)

Marangoni convection in a liquid saturated porous medium with internal heat generation.
by: Md. Arifin, Norihan, et al.
Published: (2009)

Isolation and Characterization of Full-Term Ammoniotic Fluid-derived Stem Cells
by: Ferdaos, Nurfarhana
Published: (2010)