Investigation on structure and properties of brass casting

QR Code

Investigation on structure and properties of brass casting

In this work, alpha (a) brass was poured in green sand mould and metallic chill mould at about 1050°C. Sand casting method and metallic chill casting method are representing the slow and fast cooling rates of the castings, respectively. The slow cooling rate in the sand mould produces larger grain...

Full description

Bibliographic Details
Main Authors:	Haque, Md. Mohafizul, Khan, Ahsan Ali
Format:	Article
Language:	English
Published:	Elsevier 2008
Subjects:	TS200 Metal manufactures. Metalworking
Online Access:	http://irep.iium.edu.my/7823/ http://irep.iium.edu.my/7823/3/Investigation_on_Structure_and_Properties_of_Brass_Casting.pdf

Similar Items

Study on the microstructure and properties of Fe-C-Si and Fe-C-Al Cast irons
by: Shaha, Sugrib Kumar, et al.
Published: (2011)

Wear characteristics of Fe-C-Si and Fe-C-Al cast irons
by: Shaha, Sugrib Kumar, et al.
Published: (2011)

Electrode wear and material removal rate during EDM of aluminum and mild steel using copper and brass electrodes
by: Khan, Ahsan Ali
Published: (2008)

Performance of different abrasive materials during abrasive water jet machining of glass
by: Khan, Ahsan Ali, et al.
Published: (2007)

Investigation on tool wear rate for modified and unmodified aluminium-silicon casting alloy
by: Haque, Md. Mohafizul, et al.
Published: (2009)

Effect of size and shape of electrodes on the performance of EDM
by: Khan, Ahsan Ali, et al.
Published: (2008)

A new approach of applying cryogenic coolant in turning AISI 304 stainless steel
by: Khan, Ahsan Ali, et al.
Published: (2010)

Design and development of Acrylic Die for producing wax pattern to gabricate hip bone joint
by: Shaha, Sugrib Kumar, et al.
Published: (2011)

A comparative study on flank wear and work surface finish during high speed milling of cast iron with different carbide tools
by: Khan, Ahsan Ali, et al.
Published: (2011)

Investigation on glass/epoxy composite surfaces machined by abrasive water jet machining
by: Mohd Azhari, Mohd Azmir, et al.
Published: (2008)

Dry machining of brass using titanium carbonitride (TiCN) coated tool
by: Mohamed Ariff, Tasnim Firdaus, et al.
Published: (2013)

Effect of process variables on structure and properties of aluminium–silicon piston alloy
by: Haque, Mohafizul Md, et al.
Published: (1998)

Experimental investigation of machining parameters on surface roughness in dry and wet wire-electrical discharge machining
by: Abdulkareem, Suleiman, et al.
Published: (2011)

Influence of dielectric fluids on surface properties of electrical discharge machined titanium alloy
by: Mohammed , Baba Ndaliman, et al.
Published: (2013)

Determination of influential factors on EDMed surface properties using Plackett-Burman design
by: Ndaliman, Mohammed Baba, et al.
Published: (2012)

Determination of influential factors on edmed surface properties using plackett-burman design
by: Ndaliman, Mohammed Baba, et al.
Published: (2012)

Role of heat transfer on process characteristics during electrical discharge machining
by: Khan, Ahsan Ali
Published: (2011)

Investigation on the surface finish, MRR and the surface damage during the EDM of tungsten carbide
by: Khan, Ahsan Ali, et al.
Published: (2011)

Experimental investigation and effective medium approximation of thermal conductivity of water based exfoliated Graphene nanofluids
by: Arifutzzaman, A. K. H. A. Ma, et al.
Published: (2018)

The effects of process variables on the hardness of nitrided 3% chromium steel
by: Mridha, Shahjahan, et al.
Published: (2008)

Modeling of EDM Process parameters for Machining Stainless Steel using Copper Electrodes
by: Khan, Ahsan Ali, et al.
Published: (2008)

Improving tool life using cryogenic cooling
by: Khan, Ahsan Ali, et al.
Published: (2008)

Capabilities of cermets tools for high speed machining of austenitic stainless steel
by: Khan, Ahsan Ali, et al.
Published: (2006)

Development of Powder Metallurgy (PM) compacted Cu-TaC electrodes for EDM
by: Ndaliman, Mohammed Baba, et al.
Published: (2011)

An introduction to electrical discharge machining (EDM)
by: Khan, Ahsan Ali, et al.
Published: (2011)

Development of Powder Metallurgy (PM) compacted Cu-TaC electrode for EDM
by: Mohammed , Baba Ndaliman, et al.
Published: (2011)

Relationship of surface roughness with current and voltage during wire EDM
by: Khan, Ahsan Ali, et al.
Published: (2006)

Analysis of microlayer defects of a functionally graded titanium alloy by electrical discharge machining
by: Abdulkareem, Sulaiman, et al.
Published: (2018)

A study on abrasive water jet machining of aluminum with garnet abrasives
by: Khan, Ahsan Ali, et al.
Published: (2005)

Reducing electrode wear ratio using cryogenic cooling during electrical discharge machining
by: Abdulkareem, Suleiman, et al.
Published: (2009)

Role of current, voltage and spark on-time on electrode material migration during EDM
by: Khan, Ahsan Ali, et al.
Published: (2011)

Influence of electrode cooling on material migration among the electrodes during edm of titanium alloy
by: Abdulkareem, Suleiman, et al.
Published: (2011)

Influence of electrode cooling on recast layers and micro crack in EDM of titanium
by: Abdulkareem, Suleiman, et al.
Published: (2011)

Influence of electrode cooling on material migration among the electrodes during EDM of titanium alloy
by: Abdulkareem, Suleiman, et al.
Published: (2011)

Effect of process parameters on abrasive contamination during water abrasive jet machining of mild steel
by: Mohd Ali, Afifah, et al.
Published: (2011)

The effects of vortex gate design on mechanical strength of thin section casting of LM 25 (Al---7Si-0.3Mg) aluminum casting alloy
by: Subhi, Zaid Ali
Published: (2012)

Surface alloying of Ti-6Al-4V using Cu-TaC composite electrode during electrical discharge machining
by: Mohammed Baba, Ndaliman, et al.
Published: (2011)

Formation of nitrides and carbides on titanium alloy surface through EDM
by: Mohammed , Baba Ndaliman, et al.
Published: (2012)

Relationship between machining variables and process characteristics during wire EDM
by: Khan, Ahsan Ali, et al.
Published: (2011)

Developments in EDM process variables
by: Khan, Ahsan Ali, et al.
Published: (2011)