A comparative study on flank wear and work surface finish during high speed milling of cast iron with different carbide tools
Abstract. Tool life sharply reduced for all the carbide tools while increasing cutting speed twice (from 500m/min to 1000m/min) during machining cast iron. Though the productivity would be double at the speed of 1000m/min than that at the speed of 500m/min, tool wear increases to a few times which i...
| Main Authors: | , , |
|---|---|
| Format: | Book Chapter |
| Language: | English |
| Published: |
International Islamic University Malaysia
2011
|
| Subjects: | |
| Online Access: | http://irep.iium.edu.my/25559/ http://irep.iium.edu.my/25559/2/Chapter_35.pdf |
| _version_ | 1848779481723961344 |
|---|---|
| author | Khan, Ahsan Ali Aman Nor Rasid, Zuraida Yusof, Izausmawati |
| author_facet | Khan, Ahsan Ali Aman Nor Rasid, Zuraida Yusof, Izausmawati |
| author_sort | Khan, Ahsan Ali |
| building | IIUM Repository |
| collection | Online Access |
| description | Abstract. Tool life sharply reduced for all the carbide tools while increasing cutting speed twice (from 500m/min to 1000m/min) during machining cast iron. Though the productivity would be double at the speed of 1000m/min than that at the speed of 500m/min, tool wear increases to a few times which indicates that the inserts used are not suitable for machining at a high speed like 1000m/min. It is better to cut cast iron using uncoated K20 carbide at low cutting speed rather than at high speed. TiAlN coated carbide has the best wear resistance at both speeds. |
| first_indexed | 2025-11-14T15:18:28Z |
| format | Book Chapter |
| id | iium-25559 |
| institution | International Islamic University Malaysia |
| institution_category | Local University |
| language | English |
| last_indexed | 2025-11-14T15:18:28Z |
| publishDate | 2011 |
| publisher | International Islamic University Malaysia |
| recordtype | eprints |
| repository_type | Digital Repository |
| spelling | iium-255592014-04-30T05:49:39Z http://irep.iium.edu.my/25559/ A comparative study on flank wear and work surface finish during high speed milling of cast iron with different carbide tools Khan, Ahsan Ali Aman Nor Rasid, Zuraida Yusof, Izausmawati TS200 Metal manufactures. Metalworking Abstract. Tool life sharply reduced for all the carbide tools while increasing cutting speed twice (from 500m/min to 1000m/min) during machining cast iron. Though the productivity would be double at the speed of 1000m/min than that at the speed of 500m/min, tool wear increases to a few times which indicates that the inserts used are not suitable for machining at a high speed like 1000m/min. It is better to cut cast iron using uncoated K20 carbide at low cutting speed rather than at high speed. TiAlN coated carbide has the best wear resistance at both speeds. International Islamic University Malaysia 2011 Book Chapter PeerReviewed application/pdf en http://irep.iium.edu.my/25559/2/Chapter_35.pdf Khan, Ahsan Ali and Aman Nor Rasid, Zuraida and Yusof, Izausmawati (2011) A comparative study on flank wear and work surface finish during high speed milling of cast iron with different carbide tools. In: Advanced Machining Processes. International Islamic University Malaysia, Kuala Lumpur, Malaysia, pp. 196-200. ISBN 9789674181628 http://rms.research.iium.edu.my/bookstore/default.aspx |
| spellingShingle | TS200 Metal manufactures. Metalworking Khan, Ahsan Ali Aman Nor Rasid, Zuraida Yusof, Izausmawati A comparative study on flank wear and work surface finish during high speed milling of cast iron with different carbide tools |
| title | A comparative study on flank wear and work surface finish during high speed milling of cast iron with different carbide tools |
| title_full | A comparative study on flank wear and work surface finish during high speed milling of cast iron with different carbide tools |
| title_fullStr | A comparative study on flank wear and work surface finish during high speed milling of cast iron with different carbide tools |
| title_full_unstemmed | A comparative study on flank wear and work surface finish during high speed milling of cast iron with different carbide tools |
| title_short | A comparative study on flank wear and work surface finish during high speed milling of cast iron with different carbide tools |
| title_sort | comparative study on flank wear and work surface finish during high speed milling of cast iron with different carbide tools |
| topic | TS200 Metal manufactures. Metalworking |
| url | http://irep.iium.edu.my/25559/ http://irep.iium.edu.my/25559/ http://irep.iium.edu.my/25559/2/Chapter_35.pdf |