Development of light-weight polymer composite containing solid waste fillers and its application as sub-base layer of flexible pavement.

QR Code

Development of light-weight polymer composite containing solid waste fillers and its application as sub-base layer of flexible pavement.

This research programme is an in-depth study regarding the sub-base layer of pavements made by a polymer composite using crumb recycled tyres, recycled plastic and fly ash as fillers with jute-fabric as a reinforcement. Emphasis is placed mostly on the mix proportions, mechanical properties and d...

Full description

Bibliographic Details
Main Author:	Tasnim, Sadia
Format:	Thesis
Published:	Curtin University 2021
Online Access:	http://hdl.handle.net/20.500.11937/88383

Similar Items

Dynamic Analysis of Falling Weight Deflectometer Test Results for Strength of Character of flexible Pavement Layer Moduli
by: Nega, Ainalem, et al.
Published: (2015)

'Simulation of Shakedown Behavior for Flexible Pavement's Unbound Granular Layer
by: Nega, Ainalem, et al.
Published: (2015)

A comprehensive review of flexible pavement failures, improvement methods and its disadvantages
by: Tasnim, Sadia, et al.
Published: (2021)

Stresses and deformations in flexible layered pavement systems subjected to dynamic loads
by: Brown, S.F.
Published: (1967)

Effect of Stage Construction on Numerical Modeling of Layered Flexible Pavement System
by: Ghadimi, Behzad, et al.
Published: (2012)

Sustainable Use of Crushed Concrete Waste for Thin Flexible Pavement
by: Siripun, Komsun, et al.
Published: (2012)

Waste tyre rubber application in semi-rigid and flexible pavement
by: Euniza, J., et al.
Published: (2020)

The effect of alumina as filler in waste cooking oil-based polyurethane solid polymer electrolyte / Rosnasuha Mohd Nasir
by: Mohd Nasir, Rosnasuha
Published: (2016)

The prediction of permanent deformation in flexible pavements
by: Bell, C.A.
Published: (1978)

Flexible pavement modelling using Kenlayer
by: Chegenizadeh, Amin, et al.
Published: (2016)

Cold in-place recycling for flexible pavements
by: Ahmad Kamil, Arshad, et al.
Published: (2020)

Dynamic simulation of a flexible pavement layers considering shakedown effects and soil-asphalt interaction
by: Ghadimi, Behzad, et al.
Published: (2016)

A comparison of implementation of linear and nonlinear constitutive models in numerical analysis of layered flexible pavement
by: Ghadimi, Behzad, et al.
Published: (2016)

Optimum use of the flexible pavement condition indicators in pavement management system
by: Shiyab, Adnan M S H
Published: (2007)

Evaluation of Tire-Pavement Contact Stress Distribution of Pavement Response and Some Effects on the Flexible Pavements
by: Nega, A., et al.
Published: (2017)

Flexible pavements and climate change: impact of climate change on the performance, maintenance, and life-cycle costs of flexible pavements
by: Qiao, Yaning
Published: (2015)

An initial investigation of the use of local industrial wastes and by-products as mineral fillers in stone mastic asphalt pavements
by: Muniandy, Ratnasamy, et al.
Published: (2009)

Properties of polymer concrete containing active micro filler of palm oil fuel ash
by: Nur Hafizah, A Khalid, et al.
Published: (2019)

Determination of filler content for natural filler polymer composite by thermogravimetric analysis
by: Nabinejad, O., et al.
Published: (2015)

Fusion of low-cost and light-weight sensor system for mobile flexible manipulator
by: Chang, Tai Kiang
Published: (2019)

Active filler trials for in situ foamed bitumen stabilised pavements
by: Leek, Colin, et al.
Published: (2014)

Characterisations of Base Course Materials For Flexible Pavements
by: Siripun, Komsun, et al.
Published: (2010)

Physico-mechanical properties of polymer concrete containing micro-filler of palm oil fuel ash
by: A. Khalid, Nur Hafizah, et al.
Published: (2018)

A comparison between austroads pavement structural design and AASHTO design in flexible pavement
by: Ghadimi, Behzad, et al.
Published: (2013)

A comparison between effects of linear and non-linear mechanistic behaviour of materials on the layered flexible pavement response
by: Ghadimi, Behzad, et al.
Published: (2013)

Correlation between functional and structural properties of flexible pavement
by: Mohmad Barudin, Nurzahrin, et al.
Published: (2019)

Correlation between functional and structural properties of flexible pavement
by: Mohmad Barudin, Nurzahrin, et al.
Published: (2018)

The design model of unbound granular materials for flexible pavement
by: Siripun, Komsun, et al.
Published: (2012)

Correlation between functional and structural properties of flexible pavement
by: N. M., Barudin, et al.
Published: (2019)

Resilient modulus of stabilized subgrade for flexible pavement design
by: Arumugam, Thillai Nayagee, et al.
Published: (2019)

PHYSICAL CHARACTERIZATION OF POLYURETHANECLAY COMPOSITE DOPED WITH TREATED AND UNTREATED PU WASTE AS FILLER FOR SUBGRADE LAYER APPLICATIONS
by: Atil, Aida Atiqah, et al.
Published: (2023)

PHYSICAL CHARACTERIZATION OF POLYURETHANECLAY COMPOSITE DOPED WITH TREATED AND UNTREATED PU WASTE AS FILLER FOR SUBGRADE LAYER APPLICATIONS
by: Atil, Aida Atiqah, et al.
Published: (2023)

Novel cathode-supported hollow fibers for light weight micro-tubular solid oxide fuel cells with an active cathode functional layer
by: Meng, X., et al.
Published: (2014)

Synthesis and characterizations of novel solid polymer electrolytes with carbon nanotube as a filler / Suriani Ibrahim
by: Suriani , Ibrahim
Published: (2011)

Effect of Rice Husks as Filler in Polymer Matrix Composites
by: Siti Rabiatull Aisha, Idris, et al.
Published: (2012)

The effect of rice husks as filler in polymer matrix composites
by: Hardinnawirda, Kahar
Published: (2012)

Immediate effects of some corrective maintenance interventions on flexible pavements
by: Qiao, Yaning, et al.
Published: (2018)

Study on flexible pavement failures in soft soil tropical regions
by: Muthuramalingam, Jayakumar, et al.
Published: (2015)

Ultimate design of unbound granular base courses for flexible pavements
by: Jitsangiam, Peerapong, et al.
Published: (2011)

Utilization of agricultural wastes as fillers in thermoplastics composites
by: Hassan, Azman, et al.
Published: (2004)