Optimization of infill drilling in whicher range field in Australia

QR Code

Optimization of infill drilling in whicher range field in Australia

© 2017, Society of Petroleum Engineers Now that most of the conventional reservoirs are being depleted at a rapid pace, the focus is on unconventional reservoirs like tight gas reservoirs. Due to the heterogeneous nature and low permeability of unconventional reservoirs, they require a huge number o...

Full description

Bibliographic Details
Main Authors:	Al-Fatlawi, O., Aswin, R., Roy, V., Hossain, Mofazzal, Kabir, A.
Format:	Conference Paper
Published:	2017
Online Access:	http://hdl.handle.net/20.500.11937/70227

Similar Items

Geological reservoir modelling for Whicher Range Field tight gas sand
by: Orsini Martin, Cesar Daniel
Published: (2013)

The importance of infill drilling in a mature offshore field
by: Ismail, Issham
Published: (1991)

Analysis of the reservoir electrofacies in the framework of hydraulic flow units in the Whicher Range Field, Perth Basin, Western Australia
by: Kadkhodaie-Ilkhchi, Rahim, et al.
Published: (2013)

Seismic inversion and attributes analysis for porosity evaluation of the tight gas sandstones of the Whicher Range field in the Perth Basin, Western Australia
by: Kadkhodaie-Ilkhchi, R., et al.
Published: (2014)

Unraveling the reservoir heterogeneity of the tight gas sandstones using the porosity conditioned facies modeling in the Whicher Range field, Perth Basin, Western Australia
by: Kadkhodaie-Ilkhchi, R., et al.
Published: (2019)

Factors controlling tight gas sandstone reservoir quality in the Whicher Range gas field, Southern Perth Basin, Western Australia
by: Orsini, C., et al.
Published: (2011)

Petroleum system and formation evaluation of the Whicher Range tight gas sands
by: Rezaee, Reza, et al.
Published: (2012)

Reservoir & production engineering data review & analyses of the Whicher Range tight gas sands
by: Bahrami, Hassan, et al.
Published: (2012)

Determination of best possible correlation for gas compressibility factor to accurately predict the initial gas reserves in gas-hydrocarbon reservoirs
by: Al-Fatlawi, O., et al.
Published: (2017)

Simulation of a shale gas field development: An example from Western Australia
by: Gödeke, S., et al.
Published: (2012)

Infrastructure for Infill Development
by: Thomson, Giles, et al.
Published: (2017)

Sustainable Infill Development
by: Thomson, Giles, et al.
Published: (2017)

PERTH’S INFILL HOUSING FUTURE
by: Rowley, Steven, et al.
Published: (2017)

Numerical approach for the prediction of formation and hydraulic fracture properties considering elliptical flow regime in tight gas reservoirs
by: Hossain, Mofazzal, et al.
Published: (2018)

Drilling and completion challenges and remedies of CO2 injected wells with emphasis to mitigate well integrity issues
by: Hossain, Mofazzal, et al.
Published: (2011)

New Technologies and Processes for Infill Development
by: Thomson, G., et al.
Published: (2017)

Investigation of infill wall effect on inelastic response of structures
by: Al Masoodi, Doaa Talib Hashim, et al.
Published: (2017)

Infilling streamflow data using HEC_HMS
by: Hong, Kee An, et al.
Published: (2020)

Spatial smoothing, Nugget effect and infill asymptotics
by: Lu, Zudi, et al.
Published: (2008)

Reinforced concrete beams with lightweight concrete infill
by: Vimonsatit, Vanissorn, et al.
Published: (2012)

Thermal resistance of interlocking block wall with infill
by: Muhammad Asyraf , Zulkifli
Published: (2015)

Seismic while drilling experiment with diamond drilling at Brukunga, South Australia
by: Sun, Bai Chun, et al.
Published: (2013)

Use of Lightweight Concrete as Infill of Reinforced Concrete Sections
by: Vimonsatit, Vanissorn, et al.
Published: (2010)

Delivering diverse and affordable housing on infill development sites
by: Rowley, Steven, et al.
Published: (2012)

Effect of Infilled Walls On The Performance of Steel Frame Structures
by: Mohammadhasani, M., et al.
Published: (2023)

Numerical Simulation for the Reserve Estimation and Production Optimization from Tight Gas Reservoirs
by: Al-Fatlawi, Omar Falih
Published: (2018)

Optimization of drill bit geometries for minimum thermal damage in bone drilling
by: Mohd Faizal, Ali Akhbar, et al.
Published: (2024)

Multi-objective optimization of surgical drill bit to minimize thermal damage in bone-drilling
by: Mohd Faizal, Ali Akhbar, et al.
Published: (2019)

Evaluation of damage mechanisms in tight gas reservoirs: Field example from perth Basin
by: Bahrami, N., et al.
Published: (2015)

The influence of perturbed stresses near faults on drilling strategy: A case study in Blacktip field, North Australia
by: Rasouli, Vamegh, et al.
Published: (2011)

An estimation of rock strength using a drilling performance model: A case study in Blacktip field, Australia
by: Mostofi, M., et al.
Published: (2011)

Delivering Quality Infill Development in Perth: The contribution of the planning system
by: Babb, Courtney
Published: (2017)

Effective stiffness of reinforced concrete section with lightweight blocks infill
by: Wahyuni, Ade, et al.
Published: (2012)

Optimization of drilling parameters for thermal bone necrosis prevention
by: Mohd Faizal, Ali Akhbar, et al.
Published: (2018)

Effect of partially infill wall on the seismic behavior of RC frame buildings
by: Thinley, K., et al.
Published: (2017)

Using quantitative analysis to assess the appropriateness of infill buildings in historic settings
by: Hu, Yun, et al.
Published: (2017)

Numerical study of blast mitigation performance of folded structure with foam infill
by: Li, Z., et al.
Published: (2019)

FEM modelling and analysis of reinforced concrete section with lightweight blocks infill
by: Wahyuni, Ade, et al.
Published: (2012)

Structural characteristics of reinforced concrete beams and slabs with lightweight blocks infill
by: Wahyuni, Ade Sri
Published: (2012)

Adaptation of urban infill housing towards malaysian city centre revitalisation
by: Liew, Toh Yean
Published: (2006)

Cannot write session to /tmp/vufind_sessions/sess_ihe1gub9gduddavoj2fn6jp891