Investigation of Microstructural and Carbon Deposition Effects in SOFC Anodes Through Modelling and Experiments
The investigation of the SOFC anode microstructural properties affected by microstructural parameters and degradation is the focus of this research. Imaging and image processing techniques are developed to achieve quantification of the anode microstructural information. The analytical and Computatio...
| Main Author: | Rathore, Shambhu Singh |
|---|---|
| Format: | Thesis |
| Published: |
Curtin University
2017
|
| Online Access: | http://hdl.handle.net/20.500.11937/69416 |
Similar Items
Controlled deposition and utilization of carbon on Ni-YSZ anodes of SOFCs operating on dry methane
by: Jiao, Y., et al.
Published: (2016)
by: Jiao, Y., et al.
Published: (2016)
Performance and carbon deposition over Pd nanoparticle catalyst promoted Ni/GDC anode of SOFCs in methane, methanol and ethanol fuels
by: Babaei, A., et al.
Published: (2012)
by: Babaei, A., et al.
Published: (2012)
Improving single-chamber performance of an anode-supported SOFC by impregnating anode with active nickel catalyst
by: Zhang, C., et al.
Published: (2010)
by: Zhang, C., et al.
Published: (2010)
A CFD-based model of a planar SOFC for anode flow field design
by: Danilov, Valery, et al.
Published: (2009)
by: Danilov, Valery, et al.
Published: (2009)
Effects of deposition time and counter-electrode size on the fabrication of lscf-sdc carbonate composite cathode for sofc
by: Baharuddin, Nurul Akidah, et al.
Published: (2018)
by: Baharuddin, Nurul Akidah, et al.
Published: (2018)
Influence of Electrophoretic Deposition (EPD) Voltage on SOFC interconnect morphology
by: Lowrance, Yohannes Nyambong, et al.
Published: (2022)
by: Lowrance, Yohannes Nyambong, et al.
Published: (2022)
Influence of Electrophoretic Deposition (EPD) voltage on SOFC
interconnect morphology
by: Lowrance, Yohannes Nyambong, et al.
Published: (2022)
by: Lowrance, Yohannes Nyambong, et al.
Published: (2022)
Direct-methane Solid Oxide Fuel Cell (SOFC) with Ni-SDC Anode-Supported Cell
by: Asmida, Ideris, et al.
Published: (2017)
by: Asmida, Ideris, et al.
Published: (2017)
Electrocatalytic Promotion of Palladium Nanoparticles on Hydrogen Oxidation on Ni/GDC Anodes of SOFCs via Spillover
by: Babaei, A., et al.
Published: (2009)
by: Babaei, A., et al.
Published: (2009)
Electrochemical performance of a Ni and YSZ composite synthesised by ultrasonic spray pyrolysis as an anode for SOFCs
by: Park, H., et al.
Published: (2011)
by: Park, H., et al.
Published: (2011)
One-pot synthesis of silver-modified sulfur-tolerant anode for SOFCs with an expanded operation temperature window
by: Qu, J., et al.
Published: (2017)
by: Qu, J., et al.
Published: (2017)
Redox of Ni/YSZ anodes and oscillatory behavior in single-chamber SOFC under methane oxidation conditions
by: Wang, Z., et al.
Published: (2011)
by: Wang, Z., et al.
Published: (2011)
A new technique of estimating anodic and cathodic charge transfer coefficients from SOFC polarization curves
by: Danilov, Valery, et al.
Published: (2009)
by: Danilov, Valery, et al.
Published: (2009)
Model reduction for SOFC thermal management
by: Periasamy, Vijay, et al.
Published: (2014)
by: Periasamy, Vijay, et al.
Published: (2014)
A dynamic CSTR model for SOFC
by: Hosseini, Shahin, et al.
Published: (2009)
by: Hosseini, Shahin, et al.
Published: (2009)
Ni-samaria-doped Ceria (Ni-SDC) Anode-supported Solid Oxide Fuel Cell (SOFC) Operating with CO
by: Asmida, Ideris, et al.
Published: (2017)
by: Asmida, Ideris, et al.
Published: (2017)
Production of single cell anode-supported SOFC using NiO/YSZ-YSZ-LSM/YSZ powder materials
by: ., Sulistyo
Published: (2015)
by: ., Sulistyo
Published: (2015)
Compaction pressure effect on microstructure and electrochemical performance of GdBaCo2O5+d cathode for IT-SOFCs
by: Li, N., et al.
Published: (2012)
by: Li, N., et al.
Published: (2012)
Electrophoretic deposited LSCF-SDCC-Ag cathode coating on ferritic stainless steel interconnect for SOFC
by: Omar, Noor Irinah, et al.
Published: (2018)
by: Omar, Noor Irinah, et al.
Published: (2018)
Development of high-performance cathodes for IT-SOFCs through beneficial interfacial reactions
by: Zhou, Y., et al.
Published: (2009)
by: Zhou, Y., et al.
Published: (2009)
Methane-fueled SOFC with traditional nickel-based anode by applying Ni/Al2O3 as a dual-functional layer
by: Wang, W., et al.
Published: (2009)
by: Wang, W., et al.
Published: (2009)
A dynamic plug flow model for planar SOFC
by: Hosseini, Shahin, et al.
Published: (2009)
by: Hosseini, Shahin, et al.
Published: (2009)
Cr doping effect in B-site of La0.75Sr0.25MnO 3 on its phase stability and performance as an SOFC anode
by: Zheng, Y., et al.
Published: (2009)
by: Zheng, Y., et al.
Published: (2009)
Tubular direct carbon SOFC with ceramic separation membrane to remove CO2
by: Shao, Zongping
Published: (2015)
by: Shao, Zongping
Published: (2015)
Dynamic tank in series modeling of direct internal reforming SOFC
by: Hosseini, Shahin, et al.
Published: (2017)
by: Hosseini, Shahin, et al.
Published: (2017)
Modelling the triple phase boundary length in infiltrated SOFC electrodes
by: Vijay, P., et al.
Published: (2017)
by: Vijay, P., et al.
Published: (2017)
Multi-scale Modelling and Optimization Study on the Thermal Management of SOFC
by: Tang, Shi
Published: (2016)
by: Tang, Shi
Published: (2016)
Carbon formation inhibition in solid oxide fuel cells (SOFCs) using H2S
by: Asmida, Ideris
Published: (2014)
by: Asmida, Ideris
Published: (2014)
Modelling of Solid Oxide Fuel Cell - Multi Scaling Modelling of the Planar SOFC
by: Hosseini, Shahin
Published: (2011)
by: Hosseini, Shahin
Published: (2011)
Nickel-based anode with water storage capability to mediate carbon deposition for direct ethanol solid oxide fuel cells
by: Wang, W., et al.
Published: (2014)
by: Wang, W., et al.
Published: (2014)
The effect of employing different raster orientations on the mechanical properties and microstructure of Fused Deposition Modeling parts
by: A. W. , Fatimatuzahraa, et al.
Published: (2011)
by: A. W. , Fatimatuzahraa, et al.
Published: (2011)
Microstructure and discharge performance of aluminum Al 6061 alloy as anode for electrolyte activated battery
by: Priyathashiny Pongali,, et al.
Published: (2020)
by: Priyathashiny Pongali,, et al.
Published: (2020)
Numerical Modeling of Molten Carbonate Fuel Cell: Effects of Gas Flow Direction in Anode and Cathode
by: Tay, Chen Lim, et al.
Published: (2012)
by: Tay, Chen Lim, et al.
Published: (2012)
Numerical Modelling of Molten Carbonate Fuel Cell: Effects of Gas Flow Direction in Anode and Cathode
by: Tay, Chen Lim, et al.
Published: (2014)
by: Tay, Chen Lim, et al.
Published: (2014)
Numerical modelling of molten carbonate fuel cell: Effects of gas flow direction in anode and cathode
by: Tay, C., et al.
Published: (2014)
by: Tay, C., et al.
Published: (2014)
Cathode supports of SOFCs with a hierarchical pore structure
by: Dong, Dehua, et al.
Published: (2013)
by: Dong, Dehua, et al.
Published: (2013)
Electrolyte Materials for Solid Oxide Fuel Cells (SOFCs)
by: Liu, Yu, et al.
Published: (2013)
by: Liu, Yu, et al.
Published: (2013)
Fabrication and Operation of Flow-Through Tubular SOFCs for Electric Power and Synthesis Gas Cogeneration from Methane
by: Shi, Huangang, et al.
Published: (2014)
by: Shi, Huangang, et al.
Published: (2014)
Electrophoretic deposition of YSZ thin-film electrolyte for SOFCs utilizing electrostatic-steric stabilized suspensions obtained via high energy ball milling
by: Zou, Y., et al.
Published: (2011)
by: Zou, Y., et al.
Published: (2011)
Pd-promoted La0.75 Sr0.25 Cr0.5 Mn0.5 O3/YSZ composite anodes for direct utilization of methane in SOFCs
by: Ye, Y., et al.
Published: (2008)
by: Ye, Y., et al.
Published: (2008)
Similar Items
-
Controlled deposition and utilization of carbon on Ni-YSZ anodes of SOFCs operating on dry methane
by: Jiao, Y., et al.
Published: (2016) -
Performance and carbon deposition over Pd nanoparticle catalyst promoted Ni/GDC anode of SOFCs in methane, methanol and ethanol fuels
by: Babaei, A., et al.
Published: (2012) -
Improving single-chamber performance of an anode-supported SOFC by impregnating anode with active nickel catalyst
by: Zhang, C., et al.
Published: (2010) -
A CFD-based model of a planar SOFC for anode flow field design
by: Danilov, Valery, et al.
Published: (2009) -
Effects of deposition time and counter-electrode size on the fabrication of lscf-sdc carbonate composite cathode for sofc
by: Baharuddin, Nurul Akidah, et al.
Published: (2018)