Use of castor oil as cutting fluid in machining of hardened stainless steel with minimum quantity of lubricant

QR Code

Use of castor oil as cutting fluid in machining of hardened stainless steel with minimum quantity of lubricant

© 2015 Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license. Use of cutting fluids in machining processes can reduce the cutting temperature and provides lubrication to tool and workpiece. These translate to longer tool life and improved surface quality. Due to the...

Full description

Bibliographic Details
Main Authors:	Elmunafi, M., Kurniawan, Denni, Noordin, M.
Format:	Conference Paper
Published:	2015
Online Access:	http://hdl.handle.net/20.500.11937/68215

Similar Items

Use of Castor Oil as Cutting Fluid in Machining of Hardened Stainless Steel with Minimum Quantity of Lubricant
by: Elmunafi, M., et al.
Published: (2015)

Tool Life of Coated Carbide Cutting Tool when Turning Hardened Stainless Steel under Minimum Quantity Lubricant Using Castor Oil
by: Elmunafi, M., et al.
Published: (2015)

Effect of cutting speed and feed in turning hardened stainless steel using coated carbide cutting tool under minimum quantity lubrication using castor oil
by: Elmunafi, M., et al.
Published: (2015)

Effects of minimum quantity lubrication technique in different machining
by: Urmi, W. T., et al.
Published: (2022)

Feasibility study of using vegetable oil as a cutting lubricant through the use of minimum quantity lubricant during machining
by: Sharif, Safian, et al.
Published: (2009)

Performance study of organic based minimum quantity lubrication on machining difficult-to-cut material
by: Jamaludin, Ahmad Shahir, et al.
Published: (2019)

Machinability study on drilling austenite stainless steel 316l1 using minimum quantity lubrication (MQL) on surface roughness
by: Zuraifah, Kamarudin
Published: (2012)

The use of TiAIN coated carbide tool when finish machining hardened stainless steel
by: Noordin, M. Y., et al.
Published: (2007)

Study of cutting speed effects on lubricant oil film thickness under minimum quantity lubrication
by: Nur Izzati Khoirunnisa, Ismail, et al.
Published: (2020)

Experimental Investigation and Optimization of Minimum Quantity Lubrication for Machining of AA6061-T6
by: Najihah, Mohamed, et al.
Published: (2015)

Performance of TialN coated carbide tool in peck drilling stainless steel SS316L with pressurized minimum quantity lubrication
by: M., Malik, et al.
Published: (2014)

A review on recent development of minimum quantity lubrication for sustainable machining
by: Nurul Nadia, Nor Hamran, et al.
Published: (2020)

Integration chatter avoidance and minimum quantity lubrication condition in machining process
by: Wan Mohd Azlan, Wan Mohd Nowalid
Published: (2019)

Orthogonal cutting performance of vegetable-based lubricants via minimum quantity lubrication technique on AISI 316L
by: Amiril Sahab, Abdul Sani, et al.
Published: (2024)

Minimum Quantity Lubrication: Quantifying Non-Deterministic Component Of Sustainability Index For Machining Operations
by: Najiha, M. S., et al.
Published: (2016)

Investigation of accuracy in microdrilling with minimum quantity lubrication
by: Mohammad, Yeakub Ali, et al.
Published: (2017)

Application of minimum quantity lubrication for various machining processes - A mini review
by: N. E. H., Zamiruddin, et al.
Published: (2020)

Evaluation of mist flow characteristic and performance in Minimum Quantity Lubrication (MQL) machining
by: Abd Rahim, Erween, et al.
Published: (2018)

Cutting performance of different coatings during minimum quantity lubricant milling of AA6061T6
by: Mohd Khairil Hafizi, Khairolazar
Published: (2013)

Machining Performance Of Aluminum Alloy 6061-T6 On Surface Finish Using Minimum Quantity Lubrication
by: Najiha, M. S., et al.
Published: (2015)

A computational fluid dynamics analysis of single and three nozzles minimum quantity lubricant flow for milling
by: Najiha, M. S., et al.
Published: (2014)

Minimum Quantity Lubricant Flow Analysis In End Milling Processes: A Computational Fluid Dynamics Approach
by: Najiha, M. S., et al.
Published: (2012)

Minimum quantity lubrication in micromachining: A greener approach
by: Zulkifli, Ahmad Syahmi Arham, et al.
Published: (2016)

Effect of cutting speed on Bio-corrosion of AISI 316L stainless steel
by: Saliza Azlina, O., et al.
Published: (2016)

A review identifying the effectiveness of minimum quantity lubrication (MQL) during conventional machining
by: Boswell, Brian, et al.
Published: (2017)

Vegetable Nanofluid Influence on End Milling Machinability of Nickel Alloys with Minimum Quantity Lubrication
by: Hirudayanathan, Hiru Purushothaman
Published: (2024)

Effects of minimum quantity lubrication technique in different machining processes - a comprehensive review
by: Wajiha Tasnim, Urmi, et al.
Published: (2022)

Bold approach in finite element simulation on minimum quantity lubrication effect during machining
by: Ainur Munira, Rosli, et al.
Published: (2019)

Experimental analysis and optimization of coated and uncoated carbide tool in drilling aisi 316 L austenite stainless steel using minimum quantity lubrication technique
by: Mukhtar, Malik
Published: (2018)

Experimental Investigation of Minimum Quantity Lubrication on Tool Wear in Aluminum Alloy 6061-T6 using Different Cutting Tools
by: M., Puvanesan, et al.
Published: (2014)

Machining parameters effect in dry turning of AISI 316L stainless steel using coated carbide tools
by: Nur, R., et al.
Published: (2017)

Comparison between nitrogen- oil- mist and air-oil- mist condition when turning of hardened tool stainless steel
by: Handawi, M., et al.
Published: (2014)

Investigation on Effect of Cutting Fluid Pressure Toward Machinability Using Stainless Steel 304 With Coated Cemented
by: Zainal Ariffin, Selamat, et al.
Published: (2014)

Minimum Quantity Lubrication (MQL) using Ranque - Hilsch Vortex Tube (RHVT) for Sustainable Machining
by: H. A., Salaam, et al.
Published: (2012)

Integrated chatter avoidance and minimum quantity lubrication conditions for chatter vibration problem in the machining process
by: Wan Azlan, Wan Mohd Nowalid, et al.
Published: (2015)

Measurement of lubricant oil film thickness under minimum quantity lubrication milling process
by: Nur Elya Haniza, Zamiruddin
Published: (2022)

Oil viscosity effects on lubricant oil film behaviour under minimum quantity lubrication
by: N. E. H., Zamiruddin, et al.
Published: (2021)

Parametric Optimization of End Milling Process Under Minimum Quantity Lubrication With Nanofluid as Cutting Medium Using Pareto Optimality Approach
by: Najiha, M. S., et al.
Published: (2016)

Investigation of Flow Behavior in Minimum Quantity Lubrication Nozzle for End Milling Processes
by: Najiha, M. S., et al.
Published: (2012)

Interaction effect of machining parameters on material removal rate in the machining of AA6061-T6 using minimum quantity lubrication conditions
by: Najiha, M.S., et al.
Published: (2020)

Cannot write session to /tmp/vufind_sessions/sess_pt3811t5qd8fr6n5mp2hdgplqd