Time and temperature regime of continuous grain coarsening in an ECAP-processed Al(0.1 wt.% Sc) alloy

QR Code

Time and temperature regime of continuous grain coarsening in an ECAP-processed Al(0.1 wt.% Sc) alloy

An equiaxed, submicron grain size distribution was generated in an Al(0.1 wt.% Sc) alloy by processing through equal channel angular pressing followed by a low temperature pre-ageing heat treatment. The alloy was subsequently annealed for various times at 300, 350, 400 and 450 °C for investigating t...

Full description

Bibliographic Details
Main Authors:	Bommareddy, A., Quadir, Md Zakaria, Ferry, M.
Format:	Journal Article
Published:	Elsevier B.V. 2012
Online Access:	http://hdl.handle.net/20.500.11937/52681

Similar Items

Effect of copper addition on grain refinement of austenite in Fe-8wt.%Ni-(0.3)Wt.% Cu alloy
by: Junaidi Syarif,, et al.
Published: (2010)

Grain growth and recrystallization behaviors of an ultrafine grained Al-0.6 wt%Mg-0.4 wt%Si-5vol.%SiC nanocomposite during heat treatment and extrusion
by: Yao, X., et al.
Published: (2018)

Effects of temperature and strain rate on the dynamic mechanical behavior of a fine grained Al-Sc alloy
by: Major, Z., et al.
Published: (2017)

Relationship between the microstructure and property of Al-0.21wt% Mg-0.41wt% Si alloy
by: Jaafar, Che Nor Aiza, et al.
Published: (2013)

Coerced Mechanical Coarsening of Nanoparticle Assemblies
by: Blunt, MO, et al.
Published: (2007)

Microstructure Evolution Of Isothermally Aged Ecaped Sac Solder Alloy
by: Zulkifli, Nur Amiera
Published: (2017)

Variations in through-thickness recrystallization and grain growth textures in the Al layers in ARB-processed Al/Al(0.3% Sc) composite sheets
by: Quadir, Md Zakaria, et al.
Published: (2016)

Interfacial reaction analysis of Sn-Ag-Cu solder reinforced with 0.01wt% CNTs with isothermal aging
by: Mohamed Ariff, Azmah Hanim, et al.
Published: (2016)

Intermetallic growth of SAC237 solder paste reinforced with 0.01wt.% multi-walled carbon nanotubes
by: Mohd Najib, Mohamad Aznan, et al.
Published: (2015)

SrCo0.9Sc0.1O3-8 perovskite hollow fibre membranes for air separtion at intermediate temperatures
by: Meng, B., et al.
Published: (2009)

Grain size and mechanical properties of metals subjected to equal channel angular pressing (ECAP) process
by: M. A., Hisyam, et al.
Published: (2017)

Microstructural characterisation of a high velocity oxy-fuel thermally sprayed Al-12wt.%Sn-1wt.%Cu alloy
by: Kong, Chang-Jing, et al.
Published: (2001)

An analytical approach to the β-phase coarsening behaviour in a thermally sprayed CoNiCrAlY bond coat alloy
by: Chen, H., et al.
Published: (2017)

The mechanical performance of ARB fabricated hybrid lamellar composite of recovered/recrystallized Al and precipitation hardened Al(Sc) layers
by: Quadir, Md Zakaria, et al.
Published: (2011)

Activation and deactivation kinetics of oxygen reduction over a la 0.8Sr0.2Sc0.1Mn0.9O3 cathode
by: Zheng, Y., et al.
Published: (2008)

Prediction of novel alloy phases of Al with Sc or Ta
by: Bilic, Ante, et al.
Published: (2015)

Bi-doping effects on the structure and oxygen permeation properties of BaSc0.1Co0.9O3-d perovskite membranes
by: Sunarso, J., et al.
Published: (2010)

Mechanical response of a gravity cast Mg-9Al-1Zn-0.2Sc alloy at strain rates from 10-4 to 10 3 /s
by: Blessington, R., et al.
Published: (2016)

Effect of heating rate and annealing temperature on secondary recrystallization of goss grains in a grain orientated silicon steel
by: Citrawati, F., et al.
Published: (2017)

Deactivation and Regeneration of Oxygen Reduction Reactivity on Double Perovskite Ba(2)Bi(0.1)Sc(0.2)Co(1.7)O(6-x) Cathode for Intermediate-Temperature Solid Oxide Fuel Cells
by: Zhou, W., et al.
Published: (2011)

Hall–Petch Slope in Ultrafine Grained Al-Mg Alloys
by: Zhou, D., et al.
Published: (2019)

Formation of Highly Misoriented Fragments at Hot Band Grain Boundaries During Cold Rolling of Interstitial-Free Steel
by: Afrin, N., et al.
Published: (2015)

Structural Refinement, Recrystallization and Grain Growth Phenomena in an Accumulative Roll Bonded Nickel Sheet
by: Quadir, Md Zakaria, et al.
Published: (2017)

Effects of sintering temperature on grain growth and the complex permeability of Co0.2Ni0.3Zn0.5Fe2O4 material prepared using mechanically alloyed nanoparticles.
by: Waje, Samaila Bawa, et al.
Published: (2011)

Microstructure and mechanical properties of a bulk ultrafine grained Al-7Si-0.3Mg alloy produced by thermomechanical consolidation of a nanocrystalline powder
by: Liang, J., et al.
Published: (2016)

Kinetics and spectroscopic analyses of syngas production from glycerol steam reforming over 15WT%Ni/85WT% alumina catalyst
by: Cheng, Chin Kui
Published: (2013)

The mode of deformation in a cold-swaged multifunctional Ti-Nb-Ta-Zr-O alloy
by: Guo, W., et al.
Published: (2013)

Effect of heat treatment on gravity die-cast Sc-A356 aluminium alloy
by: Lim, Ying Pio*, et al.
Published: (2017)

Electrochemical performance of SrSc0.2Co0.8O 3-d cathode on Sm0.2Ce0.8O1.9 electrolyte for low temperature SOFCs
by: Zhou, W., et al.
Published: (2009)

Simulation study on the material stress distribution respect to different angle of ECAP
by: Kamaruddin, Akmalia Shahira, et al.
Published: (2022)

Syngas Production from Methane Dry Reforming Over 15wt%Ni/85wt%CaFe2O4 Catalyst
by: Hossain, M. Anwar, et al.
Published: (2016)

A comparative study of La0.8Sr0.2MnO3 and La0.8Sr0.2Sc0.1Mn0.9O3 as cathode materials of single-chamber SOFCs operating on a methane-air mixture
by: Zhang, C., et al.
Published: (2009)

Unusual crystallographic aspects of Microband boundaries within {111}<110> oriented grains in a cold rolled interstitial free steel
by: Zinnia, N., et al.
Published: (2014)

Cycle life and hydrogen storage properties of mechanical alloyed Ca1-xZrxNi5-yCry; (x=0, 0.05 and y=0, 0.1)
by: Chumphongphan, Somwan, et al.
Published: (2012)

Effect of ECAP die angle on mechanical properties and biocompatibility of SS316L
by: Dayangku Noorfazidah, Awang Sh'ri, et al.
Published: (2021)

Performance of SrSc0.2Co0.8O3-d + Sm0.5Sr0.5CoO3-d mixed-conducting composite electrodes for oxygen reduction at intermediate temperatures
by: Guo, Y., et al.
Published: (2009)

The effect of cross-rolling on the growth of goss grains in a grain oriented silicon steel
by: Citrawati, F., et al.
Published: (2016)

SrCo0.8Ti0.1Ta0.1O3-δ perovskite: A new highly active and durable cathode material for intermediate-temperature solid oxide fuel cells
by: Gu, H., et al.
Published: (2021)

Highly Oxygen Non-Stoichiometric BaSc0.25Co0.75O3-das a High-Performance Cathode for Intermediate-Temperature Solid Oxide Fuel Cells
by: Liu, B., et al.
Published: (2018)

Corrosion inhibition of mild steel in 15 wt.% HCl by durum wheat
by: Ajayi, Olorunfemi, et al.
Published: (2017)

Cannot write session to /tmp/vufind_sessions/sess_bb24dj6jtbnjios380lil0bdaf