The first 20 hours of geopolymerization: An in situ WAXS study of flyash-based geopolymers

QR Code

The first 20 hours of geopolymerization: An in situ WAXS study of flyash-based geopolymers

This study followed the first 20 h of flyash geopolymerization at 70 °C using time resolved Wide Angle X-ray Scattering (WAXS). The extent of dissolution of the amorphous phase of the flyash was determined to range from 29% to 54% for the different formulations trialed. The dissolution rate of the f...

Full description

Bibliographic Details
Main Authors:	Williams, Ross, Van Riessen, Arie
Format:	Journal Article
Published:	mdpi 2016
Online Access:	http://hdl.handle.net/20.500.11937/50979

Similar Items

Design and manufacture of flyash-based geopolymer concrete
by: Rangan, B. Vijaya
Published: (2008)

Mix design and production of flyash based geopolymer concrete
by: Rangan, B. Vijaya
Published: (2008)

Determination of the reactive component if fly ashes for geopolymer production using XRF and XRD
by: Williams, Ross, et al.
Published: (2010)

In situ elevated temperature testing of fly ash based geopolymer composites
by: Vickers, L., et al.
Published: (2016)

Influence of calcium compounds on the mechanical properties of fly ash geopolymer pastes
by: Jadambaa, Temuujin, et al.
Published: (2009)

Bayer-geopolymers: An exploration of synergy between the alumina and geopolymer industries
by: Van Riessen, Arie, et al.
Published: (2013)

Effect of mechanical activation of fly ash on the properties of geopolymer cured at ambient temperature
by: Jadambaa, Temuujin, et al.
Published: (2009)

Quantification of the Extent of Reaction of Metakaolin-Based Geopolymers using X-Ray Diffraction, Scanning Electron Microscopy, and Energy-Dispersive Spectroscopy
by: Williams, Ross, et al.
Published: (2011)

A Review on Geopolymer Technology for Lunar Base Construction
by: Lee, S., et al.
Published: (2022)

Methods for geopolymer formulation development and microstructural analysis
by: Van Riessen, Arie, et al.
Published: (2017)

Investigation Of Physical And Chemical Properties Of Spent Bleaching Clay Based Geopolymers Using Alkaline Activated Geopolymerization Process
by: Mak, Wei Ying
Published: (2023)

Beneficiation of Collie fly ash for synthesis of geopolymer Part 2: Geopolymers
by: Van Riessen, Arie, et al.
Published: (2013)

Geopolymers: A green alternative cement binder from industry residue
by: Van Riessen, Arie
Published: (2012)

Assessing the suitability of three Australian fly ashes as an aluminosilicate source for geopolymers in high temperature applications
by: Rickard, William, et al.
Published: (2011)

Fire-Resistant Geopolymers
by: Vickers, L., et al.
Published: (2014)

Thermal properties of geopolymers
by: Van Riessen, Arie, et al.
Published: (2009)

Benefits of sealed-curing on compressive strength of fly ash-based geopolymers
by: Lee, S., et al.
Published: (2016)

Effect of fly ash preliminary calcination on the properties of geopolymer
by: Jadambaa, Temuujin, et al.
Published: (2009)

Costs and carbon emissions for geopolymer pastes in comparison to ordinary portland cement
by: McLellan, B., et al.
Published: (2011)

Preparation and characterisation of fly ash based geopolymer mortars
by: Temuujin, Jadambaa, et al.
Published: (2010)

Effect of Flyash on Post-Cyclic Behavior of Sand
by: Keramatikerman, M., et al.
Published: (2018)

Performance of solid and cellular structured fly ash geopolymers exposed to a simulated fire
by: Rickard, William, et al.
Published: (2013)

Beneficiation of Collie fly ash for synthesis of geopolymer: Part 1 – Beneficiation
by: Van Riessen, Arie, et al.
Published: (2013)

Preparation of metakaolin based geopolymer coatings on metal substrates as thermal barriers
by: Jadambaa, Temuujin, et al.
Published: (2009)

Strategies to control the high temperature shrinkage of fly ash based geopolymers
by: Vickers, Les, et al.
Published: (2014)

Characterization of various fly ashes for preparation of geopolymers with advanced applications
by: Temuujin, J., et al.
Published: (2013)

The effect of pre-treatment on the thermal performance of fly ash geopolymers
by: Rickard, William, et al.
Published: (2013)

Development of alkali activated borosilicate inorganic polymers (AABSIP)
by: Williams, Ross, et al.
Published: (2011)

Preparation and thermal properties of fire resistant metakaolin-based geopolymer-type coatings
by: Temuujin, Jadambaa, et al.
Published: (2011)

Effect of flyash on liquefaction behaviour of sand-bentonite mixture
by: Keramatikerman, M., et al.
Published: (2018)

Elemental composition of palm-oil mill boiler flyash
by: Mohd. Yusoff, Mohd. Rashid, et al.
Published: (1987)

The development of Bayer derived geopolymers as artificial aggregates
by: Jamieson, Evan, et al.
Published: (2015)

Fly ash based geopolymer thin coatings on metal substrates and its thermal evaluation
by: Temuujin, Jadambaa, et al.
Published: (2010)

Thermal properties of spray-coated geopolymer-type compositions
by: Temuujin, Jadambaa, et al.
Published: (2012)

Performance of fibre reinforced, low density metakaolin geopolymers under simulated fire conditions
by: Rickard, William, et al.
Published: (2013)

Thermally induced microstructural changes in fly ash geopolymers: Experimental results and proposed model
by: Rickard, William, et al.
Published: (2015)

Thermal analysis of geopolymer pastes synthesised from five fly ashes of variable composition
by: Rickard, William, et al.
Published: (2012)

Impact of activator type on the immobilisation of lead in fly ash-based geopolymer
by: Lee, S., et al.
Published: (2016)

Determining the Reactivity of a Fly Ash for Production of Geopolymer
by: Chen-Tan, Nigel, et al.
Published: (2009)

Optimising ambient setting Bayer derived fly ash geopolymers
by: Jamieson, Evan, et al.
Published: (2016)

Cannot write session to /tmp/vufind_sessions/sess_0mp9lb95goo5bticoskgqee2qn