A comparison between different foaming methods for the synthesis of light weight geopolymers

QR Code

A comparison between different foaming methods for the synthesis of light weight geopolymers

Foaming to reduce the density of geopolymeric materials is increasingly being reported in the literature as it has been shown to be effective in improving their insulating properties. However, there is no consistency in foaming methods and as such this study was performed to compare methods in order...

Full description

Bibliographic Details
Main Authors:	Masi, G., Rickard, William, Vickers, Les, Bignozzi, M., Van Riessen, Arie
Format:	Journal Article
Published:	Elsevier Science Ltd 2014
Subjects:	Surfactant Foaming agent B. Porosity Geopolymers
Online Access:	http://hdl.handle.net/20.500.11937/41555

Similar Items

Performance of fibre reinforced, low density metakaolin geopolymers under simulated fire conditions
by: Rickard, William, et al.
Published: (2013)

Room temperature alkali activation of fly ash: The effect of Na2O/SiO2 ratio
by: Bignozzi, M., et al.
Published: (2014)

Three-dimensional quantification of pore structure in coal ash-based geopolymer using conventional electron tomography
by: Lee, S., et al.
Published: (2014)

Strategies to control the high temperature shrinkage of fly ash based geopolymers
by: Vickers, Les, et al.
Published: (2014)

Characterization of various fly ashes for preparation of geopolymers with advanced applications
by: Temuujin, J., et al.
Published: (2013)

Performance of solid and cellular structured fly ash geopolymers exposed to a simulated fire
by: Rickard, William, et al.
Published: (2013)

Preparation and thermal properties of fire resistant metakaolin-based geopolymer-type coatings
by: Temuujin, Jadambaa, et al.
Published: (2011)

Assessing the suitability of three Australian fly ashes as an aluminosilicate source for geopolymers in high temperature applications
by: Rickard, William, et al.
Published: (2011)

Characterisation of various fly ashes from Australia and Mongolia and their utilisation for preparation of Geopolymers with advanced applications
by: Jadambaa, T., et al.
Published: (2012)

The effect of pre-treatment on the thermal performance of fly ash geopolymers
by: Rickard, William, et al.
Published: (2013)

Thermal analysis of geopolymer pastes synthesised from five fly ashes of variable composition
by: Rickard, William, et al.
Published: (2012)

Thermal properties of spray-coated geopolymer-type compositions
by: Temuujin, Jadambaa, et al.
Published: (2012)

Fly ash based geopolymer thin coatings on metal substrates and its thermal evaluation
by: Temuujin, Jadambaa, et al.
Published: (2010)

Beneficiation of Collie fly ash for synthesis of geopolymer Part 2: Geopolymers
by: Van Riessen, Arie, et al.
Published: (2013)

Costs and carbon emissions for geopolymer pastes in comparison to ordinary portland cement
by: McLellan, B., et al.
Published: (2011)

Preparation and characterisation of fly ash based geopolymer mortars
by: Temuujin, Jadambaa, et al.
Published: (2010)

Bayer-geopolymers: An exploration of synergy between the alumina and geopolymer industries
by: Van Riessen, Arie, et al.
Published: (2013)

The effect of organic and inorganic fibres on the mechanical and thermal properties of aluminate activated geopolymers
by: Masi, G., et al.
Published: (2015)

Mechanical properties of cotton fabric reinforced geopolymer composites at 200-1000 °C
by: Alomayri, Thamer, et al.
Published: (2014)

Advancing the physical chemical understanding of coffee foam
by: Papageorgiou, Christos
Published: (2024)

High temperature behaviour of ambient cured alkali-activated materials based on ladle slag
by: Murri, A., et al.
Published: (2013)

Properties of zeolite-based geopolymer foam reinforced nanocellulose prepared in low alkaline media
by: Tay, Chai Hua
Published: (2024)

Fire-Resistant Geopolymers
by: Vickers, L., et al.
Published: (2014)

Determination of the reactive component if fly ashes for geopolymer production using XRF and XRD
by: Williams, Ross, et al.
Published: (2010)

Quantification of the Extent of Reaction of Metakaolin-Based Geopolymers using X-Ray Diffraction, Scanning Electron Microscopy, and Energy-Dispersive Spectroscopy
by: Williams, Ross, et al.
Published: (2011)

Foamed bitumen stabilised sandstone aggregates
by: Haji Abdul Karim, Roslinah
Published: (2015)

Influence of aggregate on the microstructure of geopolymer
by: Subaer
Published: (2004)

Characterisation of class F fly ash geopolymer pastes immersed in acid and alkaline solutions
by: Temuujin, Jadambaa, et al.
Published: (2011)

Engineering characterisation of in situ foamed bitumen stabilised pavements
by: Leek, Colin, et al.
Published: (2014)

Properties and microstructure of pre-formed foamed concretes
by: Hilal, Ameer Abdulrahman
Published: (2015)

Electro-exfoliating graphene from graphite for direct fabrication of supercapacitor
by: Abdul Bashid, Hamra Assyaima, et al.
Published: (2016)

Thermal properties of geopolymers
by: Van Riessen, Arie, et al.
Published: (2009)

Active filler trials for in situ foamed bitumen stabilised pavements
by: Leek, Colin, et al.
Published: (2014)

Fly ash-based geopolymer concrete
by: Rangan, B. Vijaya
Published: (2008)

Assessing the suitability of fly ash geopolymers for high temperature applications
by: Rickard, William D. A.
Published: (2012)

Development of alkali activated borosilicate inorganic polymers (AABSIP)
by: Williams, Ross, et al.
Published: (2011)

Effect of Aggregate Fine Contents on Foamed Bitumen Stabilisation
by: Huan, Yue, et al.
Published: (2012)

A Review on Geopolymer Technology for Lunar Base Construction
by: Lee, S., et al.
Published: (2022)

Methods for geopolymer formulation development and microstructural analysis
by: Van Riessen, Arie, et al.
Published: (2017)

An experimental investigation of foaming in acidic, high FexO slags
by: Stadler, S., et al.
Published: (2007)

Cannot write session to /tmp/vufind_sessions/sess_atpb7q87h35li79c4n4fb49a0n