Precursor system for bio-integration ceramics and deposition onto tantala scaffold bone interface surfaces
Modern orthopaedic bone implants and joint replacements employ hydroxyapatite (HA) coatings to stimulate bone growth. Metal Ti and Ta implants are also moving to rough and porous contact surfaces to enhance integration and long term stability. The current methods of applying HA to implants have prob...
| Main Authors: | , , , |
|---|---|
| Format: | Journal Article |
| Published: |
Elsevier S.A
2007
|
| Online Access: | http://hdl.handle.net/20.500.11937/3948 |
| Summary: | Modern orthopaedic bone implants and joint replacements employ hydroxyapatite (HA) coatings to stimulate bone growth. Metal Ti and Ta implants are also moving to rough and porous contact surfaces to enhance integration and long term stability. The current methods of applying HA to implants have problems with adhesion, and there is no MOCVD precursor system reported in the literature. We have investigated a methanolic MOCVD precursor solution of calcium-dibenzoylmethane and trimethylphosphate in combination with a unique pulsed-pressure MOCVD (PP-MOCVD) process to apply a thin adherent film of HA onto a tantalum implant scaffold material. This technique will allow use of multiple precursors and is not limited by precursor volatility. Calcium and phosphorous deposits were identified at depths of up to 4 mm on the tantalum scaffold sample by EDS analysis. |
|---|