Preparation and thermal properties of fire resistant metakaolin-based geopolymer-type coatings

QR Code

Preparation and thermal properties of fire resistant metakaolin-based geopolymer-type coatings

Geopolymer-type coatings prepared by using an industrially available sodium silicate solution (SiO2:Na2O=3.1) and metakaolin were applied to steel substrates. The coatings exhibited excellent adhesion to steel substrates achieving greater than 3.5 MPa tensile stress. Dissolution of the coating in wa...

Full description

Bibliographic Details
Main Authors:	Temuujin, Jadambaa, Rickard, William, Lee, Melissa, van Riessen, Arie
Format:	Journal Article
Published:	Elsevier B.V. 2011
Subjects:	Coating Geopolymer Metakaolin Thermal properties
Online Access:	http://hdl.handle.net/20.500.11937/30987

Similar Items

Performance of fibre reinforced, low density metakaolin geopolymers under simulated fire conditions
by: Rickard, William, et al.
Published: (2013)

Thermal properties of spray-coated geopolymer-type compositions
by: Temuujin, Jadambaa, et al.
Published: (2012)

Fly ash based geopolymer thin coatings on metal substrates and its thermal evaluation
by: Temuujin, Jadambaa, et al.
Published: (2010)

Assessing the suitability of three Australian fly ashes as an aluminosilicate source for geopolymers in high temperature applications
by: Rickard, William, et al.
Published: (2011)

Quantification of the Extent of Reaction of Metakaolin-Based Geopolymers using X-Ray Diffraction, Scanning Electron Microscopy, and Energy-Dispersive Spectroscopy
by: Williams, Ross, et al.
Published: (2011)

Metakaolin as a model system for understanding geopolymers
by: Sperinck, Shani
Published: (2012)

Thermal analysis of geopolymer pastes synthesised from five fly ashes of variable composition
by: Rickard, William, et al.
Published: (2012)

Characterisation of various fly ashes from Australia and Mongolia and their utilisation for preparation of Geopolymers with advanced applications
by: Jadambaa, T., et al.
Published: (2012)

Performance of solid and cellular structured fly ash geopolymers exposed to a simulated fire
by: Rickard, William, et al.
Published: (2013)

Preparation of metakaolin based geopolymer coatings on metal substrates as thermal barriers
by: Jadambaa, Temuujin, et al.
Published: (2009)

Strategies to control the high temperature shrinkage of fly ash based geopolymers
by: Vickers, Les, et al.
Published: (2014)

Preparation and characterisation of fly ash based geopolymer mortars
by: Temuujin, Jadambaa, et al.
Published: (2010)

The effect of pre-treatment on the thermal performance of fly ash geopolymers
by: Rickard, William, et al.
Published: (2013)

Characterization of various fly ashes for preparation of geopolymers with advanced applications
by: Temuujin, J., et al.
Published: (2013)

Characterisation of class F fly ash geopolymer pastes immersed in acid and alkaline solutions
by: Temuujin, Jadambaa, et al.
Published: (2011)

Fire-Resistant Geopolymers
by: Vickers, L., et al.
Published: (2014)

Structural, optical and thermal properties of as-prepared and annealed gold-coated porous silicon
by: Behzad, Kasra
Published: (2012)

Mechanical modeling of thermal barrier coatings at high temperatures
by: Hermosilla, Unai
Published: (2008)

Evaluation of high temperature performance of the Co-Cr-C coated P92 steel
by: Hoey, Thomas Michael
Published: (2017)

A comparison between different foaming methods for the synthesis of light weight geopolymers
by: Masi, G., et al.
Published: (2014)

Influence of aggregate on the microstructure of geopolymer
by: Subaer
Published: (2004)

Three-dimensional quantification of pore structure in coal ash-based geopolymer using conventional electron tomography
by: Lee, S., et al.
Published: (2014)

Beneficiation of Collie fly ash for synthesis of geopolymer Part 2: Geopolymers
by: Van Riessen, Arie, et al.
Published: (2013)

Scanning electrochemical microscopy at thermal sprayed anti-corrosion coatings: effect of thermal spraying on heterogeneous electron transfer kinetics
by: Niaz, Akbar, et al.
Published: (2011)

Assessing the suitability of fly ash geopolymers for high temperature applications
by: Rickard, William D. A.
Published: (2012)

Effect of fly ash preliminary calcination on the properties of geopolymer
by: Jadambaa, Temuujin, et al.
Published: (2009)

Bayer-geopolymers: An exploration of synergy between the alumina and geopolymer industries
by: Van Riessen, Arie, et al.
Published: (2013)

Room temperature alkali activation of fly ash: The effect of Na2O/SiO2 ratio
by: Bignozzi, M., et al.
Published: (2014)

Investigation on thermal barrier coating and thermal behaviour at high temperature
by: Ding, Siwen
Published: (2017)

Design and evaluation of icephobic coatings for efficient thermal de-icing
by: Brierley, Jack
Published: (2025)

Determination of the reactive component if fly ashes for geopolymer production using XRF and XRD
by: Williams, Ross, et al.
Published: (2010)

Costs and carbon emissions for geopolymer pastes in comparison to ordinary portland cement
by: McLellan, B., et al.
Published: (2011)

Effects of substrate curvature radius, deposition temperature and coating thickness on the residual stress field of cylindrical thermal barrier coatings
by: Mao, W., et al.
Published: (2011)

Thermal power stations and their application for preparation of geopolymers and zeolitic compounds
by: Temuujin, J., et al.
Published: (2012)

Influence of calcium compounds on the mechanical properties of fly ash geopolymer pastes
by: Jadambaa, Temuujin, et al.
Published: (2009)

Fly ash based geopolymer concrete: structural properties
by: Sarker, Prabir
Published: (2011)

Effect of mechanical activation of fly ash on the properties of geopolymer cured at ambient temperature
by: Jadambaa, Temuujin, et al.
Published: (2009)

Finite element modelling of stresses and failure within plasma spray thermal barrier coating systems
by: Kyaw, Si Thu
Published: (2013)

Nondestructive evaluation of thermal barrier coatings
by: Tan, Bo
Published: (2017)

Mechanical properties and microstructure of VPS and HVOF CoNiCrAlY coatings
by: Saeidi, S, et al.
Published: (2011)