Towards electrode immersion control on lonmin's no 1 circular furnace

QR Code

Towards electrode immersion control on lonmin's no 1 circular furnace

A control philosophy to be applied by Lonmin to maintain constant electrode immersion in their no. 1 circular smelting furnace is put forward. This control philosophy is facilitated though a combinationof thermodynamic models used to predict the slag composition and empirical correlations to estimat...

Full description

Bibliographic Details
Main Authors:	Georgalli, G., Eksteen, Jacques, Bezuidenhout, R., van Beek, B., Goff, T.
Format:	Journal Article
Published:	Southern African Institute of Mining and Metallurgy 2008
Subjects:	Slag chemistry Empirical correlations Smelting furnaces Slag compositions Thermodynamic model Geometric factors
Online Access:	http://hdl.handle.net/20.500.11937/29948

Similar Items

Investigating the effect of slag bath conditions on the existence of multiphase emulsion zones in PGM smelting furnaces using computational fluid dynamics
by: Eksteen, Jacques, et al.
Published: (2011)

Removal of nickel from aqueous solution using electric arc furnace slag
by: Mohammed Yusuf,
Published: (2012)

Sidewall design to improve lining life in a platinum smelting furnace
by: Eksteen, Jacques, et al.
Published: (2012)

An experimental investigation of foaming in acidic, high FexO slags
by: Stadler, S., et al.
Published: (2007)

The effects of ground granulated blast-furnace slag blending with fly ash and activator content on the workability and strength properties of geopolymer concrete cured at ambient temperature
by: Deb, Partha, et al.
Published: (2014)

Development of form-stable composite phase change material by incorporation of dodecyl alcohol into ground granulated blast furnace slag
by: Memon, S., et al.
Published: (2013)

Geopolymer concrete for environmental protection
by: Rangan, B. Vijaya
Published: (2014)

Vellgrove Avenue, Canning Vale - A Case Study of Rehabilitation – 20 year review
by: Leek, Colin
Published: (2011)

Hydration Characteristics of Cement Paste Containing Supplementary Cementitious Materials
by: Elahi, A., et al.
Published: (2012)

Utilization of steel industry slag for removal of copper and manganese
by: Beh, Chin Lai
Published: (2011)

Passive remediation for metal-rich mine water using steel slag
by: Md Zahar, Mohd Syakirin
Published: (2017)

Effect of GGBFS on setting, workability and early strength properties of fly ash geopolymer concrete cured in ambient condition
by: Nath, Pradip, et al.
Published: (2014)

Experimental Determination of Density in Molten Lime Silicate Slags as a Function of Temperature and Composition
by: McGrath, Teresa, et al.
Published: (2014)

Application of Wood to Sand-slag and its Effect on Soil Strength
by: Budihardjo, Mochamad Arief, et al.
Published: (2015)

Fracture properties of geopolymer concrete cured in ambient temperature
by: Nath, Pradip, et al.
Published: (2013)

Properties of fly ash and slag blended geopolymer concrete cured at ambient temperature
by: Deb, Partha, et al.
Published: (2013)

An optimised advanced ash fusion test for power generators
by: Daley, Patrick James
Published: (2019)

Thermal analysis on the pyrolysis of tetrabromobisphenol A (TBBPA) and Electric Arc Furnace Dust mixtures
by: Al-Harahsheh, Mohammad, et al.
Published: (2017)

Cracking a hard nut: An overview of Lonmin’s operations directed at smelting of UG2-rich concentrate blends
by: Eksteen, Jacques, et al.
Published: (2011)

Properties of fly ash based geopolymer for curing at ambient temperature
by: Nath, Pradip, et al.
Published: (2012)

Fresh and Early-Age Properties of Cement Pastes and Mortars Blended with Nickel Slag
by: Rahman, M.A., et al.
Published: (2015)

Strength and permeation properties of slag blended fly ash based geopolymer concrete
by: Deb, Partha, et al.
Published: (2013)

Effect of fly ash on the potential alkali silica reaction of ferronickel slag aggregate
by: Saha, Ashish Kumer, et al.
Published: (2017)

CFD modelling of molten matte and slag flows in a circular three-phase smelting furnace
by: Bezuidenhout, J., et al.
Published: (2009)

Carbon dioxide sequestration by mineral carbonation using electric arc furnace slag
by: Ogakwu, Omale Sunday
Published: (2020)

Computational fluid dynamic modelling of a waste-heat boiler associated with flash smelting of base metal sulphides
by: Bezuidenhout, J., et al.
Published: (2008)

Operation of a concentrated mode dual-alkali scrubber plant at the Lonmin smelter
by: Bezuidenhoudt, G., et al.
Published: (2012)

Flexural strengthening of reinforced concrete beams using fabric reinforced Alkali-Activated Slag matrix
by: Shen, Xinyu, et al.
Published: (2020)

High temperature behaviour of ambient cured alkali-activated materials based on ladle slag
by: Murri, A., et al.
Published: (2013)

Mechanical and Durability Properties of Mortars Modified with Combined Polymer and Supplementary Cementitious Materials
by: Ahmed, Shaikh
Published: (2011)

Geometric and Mechanical Modelling of Textiles
by: Sherburn, Martin
Published: (2007)

A comprehensive review of properties of concrete containing lithium refinery residue as partial replacement of cement
by: Rahman, S.A., et al.
Published: (2022)

Molecular interfacial properties and engineering performance of conductive fillers in cementitious composites
by: Sun, Junbo, et al.
Published: (2022)

Computational fluid dynamic modelling of an electric furnace used in the smelting of PGM containing concentrates
by: Bezuidenhout, J., et al.
Published: (2009)

Mesoscale geometric modelling of bifurcation in 3D woven T-beam preforms
by: Brown, Louise P., et al.
Published: (2015)

Effect of grounded blast furnace slag and rice husk ash on performance of ultra-high-performance concrete (UHPC) subjected to impact loading
by: Ha, San, et al.
Published: (2022)

Thermal analysis of composite materials for roofing / Azuddin Zulkipli
by: Zulkipli, Azuddin
Published: (2003)

Dominating Sets and Domination Polynomials of Graphs
by: Alikhani, Saeid
Published: (2009)

Computation of Maass Cusp Forms on Singly Punctured Two-Torus and Triply Punctured Two-Sphere Using Mathematica
by: Mohamed Siddig, Abubaker Ahmed
Published: (2009)

Identification of clinker formation in power station boilers – CFD based approach
by: Kotadiya, Nilesh Chandulal
Published: (2010)