Low frequency laboratory measurements of the elastic and anelastic properties of the sandstone flooded with supercritical CO2

The results of the first low frequency experiments conducted on a sandstone sample (Donnybrook, Western Australia) flooded with supercritical CO2 (scCO2) are presented. The aim of the experiments was to investigate the effects of scCO2 injection on the elastic and anelastic properties of the rock. T...

Full description

Bibliographic Details
Main Authors: Mikhaltsevitch, Vassili, Lebedev, Maxim, Gurevich, Boris
Other Authors: CSIRO
Format: Conference Paper
Published: CSIRO 2013
Online Access:http://hdl.handle.net/20.500.11937/26030
Description
Summary:The results of the first low frequency experiments conducted on a sandstone sample (Donnybrook, Western Australia) flooded with supercritical CO2 (scCO2) are presented. The aim of the experiments was to investigate the effects of scCO2 injection on the elastic and anelastic properties of the rock. The sandstone sample (porosity – 11.4%, permeability - 0.28 mD) was cut in the direction ortogonal to a formation bedding plane and tested in a Hoek's triaxial pressure cell equipped with the means for independent control of pore and confining pressures. The pore and confining pressures were set up at 10 and 31 MPa correspondingly. The low-frequency system and the pump comprising scCO2 were held at a temperature of 42° C. Supercritical CO2 was injected into the sample preliminary saturated with distilled water. The elastic parameters obtained for the sample with scCO2 at frequencies from 0.1 to 100 Hz are very close to those for the dry sample. Some discrepancy in calculated acoustic velocities can result from the difference in water and scCO2 densities. The increase of the extensional attenuation after scCO2 injection into water saturated sandstone was insignificant. The applicability of Gassmann's fluid substitution theory for the interpretation of obtained results was also tested during the experiments.