Finite element simulation on thermal fatigue of a turbine blade with thermal barrier coatings
In this paper, a finite element model was developed for a turbine blade with thermal barrier coatings to investigate its failure behavior under cyclic thermal loading. Based on temperature and stress fields obtained from finite element simulations, dangerous regions in ceramic coating were determine...
| Main Authors: | , , , , |
|---|---|
| Format: | Journal Article |
| Published: |
Zhongguo Kexueyuan Jinshu Yanjiusuo
2014
|
| Subjects: | |
| Online Access: | http://hdl.handle.net/20.500.11937/17397 |
Similar Items
The effect of morphology of thermally grown oxide on the stress field in a turbine blade with thermal barrier coatings
by: Zhu, W., et al.
Published: (2015)
by: Zhu, W., et al.
Published: (2015)
Finite element simulations on erosion and crack propagation in thermal barrier coatings
by: Ma, Z., et al.
Published: (2014)
by: Ma, Z., et al.
Published: (2014)
Determination of interfacial adhesion energies of thermal barrier coatings by compression test combined with a cohesive zone finite element model
by: Zhu, W., et al.
Published: (2015)
by: Zhu, W., et al.
Published: (2015)
Investigation on thermal barrier coating and thermal behaviour at high temperature
by: Ding, Siwen
Published: (2017)
by: Ding, Siwen
Published: (2017)
Nondestructive evaluation of thermal barrier coatings
by: Tan, Bo
Published: (2017)
by: Tan, Bo
Published: (2017)
Finite element modelling of stresses and failure within plasma spray thermal barrier coating systems
by: Kyaw, Si Thu
Published: (2013)
by: Kyaw, Si Thu
Published: (2013)
Effects of three-dimensional coating interfaces on thermo-mechanical stresses within plasma spray thermal barrier coatings
by: Kyaw, Si, et al.
Published: (2017)
by: Kyaw, Si, et al.
Published: (2017)
Effects of substrate curvature radius, deposition temperature and coating thickness on the residual stress field of cylindrical thermal barrier coatings
by: Mao, W., et al.
Published: (2011)
by: Mao, W., et al.
Published: (2011)
Investigation of combustion flame spray as in-situ repair technology for thermal barrier coatings
by: Fanicchia, Francesco
Published: (2018)
by: Fanicchia, Francesco
Published: (2018)
Damage severity evaluation methods for biocomposite vertical axis wind turbine blades due to lightning strikes
by: Mat Daud, Siti Zubaidah
Published: (2018)
by: Mat Daud, Siti Zubaidah
Published: (2018)
Quantitative assessment of the surface crack density in thermal barrier coatings
by: Yang, L., et al.
Published: (2014)
by: Yang, L., et al.
Published: (2014)
Yb3+ doping effects on thermal conductivity and thermal expansion of Yttrium aluminium garnet
by: Wang, Jing, et al.
Published: (2016)
by: Wang, Jing, et al.
Published: (2016)
Damage evolution and rupture time prediction in thermal barrier coatings subjected to cyclic heating and cooling: an acoustic emission method
by: Yang, L., et al.
Published: (2011)
by: Yang, L., et al.
Published: (2011)
Acoustic emission analysis on tensile failure of air plasma-sprayed thermal barrier coatings
by: Yao, W., et al.
Published: (2012)
by: Yao, W., et al.
Published: (2012)
Numerical study on interaction of surface cracking and interfacial delamination in thermal barrier coatings under tension
by: Zhu, W., et al.
Published: (2014)
by: Zhu, W., et al.
Published: (2014)
Investigation of La3+ Doped Yb2Sn2O7 as new thermal barrier materials
by: Wang, Jing, et al.
Published: (2015)
by: Wang, Jing, et al.
Published: (2015)
Frequency as a key parameter in discriminating the failure types of thermal barrier coatings: Cluster analysis of acoustic emission signals
by: Yang, L., et al.
Published: (2015)
by: Yang, L., et al.
Published: (2015)
Relationship between the pressure at the casing wall and at the blade tip for a vibrating turbine blade
by: Alshroof, O., et al.
Published: (2010)
by: Alshroof, O., et al.
Published: (2010)
Design, development and performance of a disc plough combined with rotary blades
by: Hashemi, Ali
Published: (2012)
by: Hashemi, Ali
Published: (2012)
Estimation of Turbine Blade Natural Frequencies from Casing Pressure and Vibration Measurements
by: Forbes, Gareth, et al.
Published: (2013)
by: Forbes, Gareth, et al.
Published: (2013)
Simulated Gas Turbine Casing Response to Rotor Blade Pressure Excitation
by: Forbes, Gareth, et al.
Published: (2007)
by: Forbes, Gareth, et al.
Published: (2007)
Non-contact gas turbine blade vibration measurment from casing pressure and vibration signals - A review
by: Forbes, Gareth, et al.
Published: (2010)
by: Forbes, Gareth, et al.
Published: (2010)
Scanning electrochemical microscopy at thermal sprayed anti-corrosion coatings: effect of thermal spraying on heterogeneous electron transfer kinetics
by: Niaz, Akbar, et al.
Published: (2011)
by: Niaz, Akbar, et al.
Published: (2011)
High temperature aniso-thermal-mechanical analysis of superplastic forming tools
by: Deshpande, Aditya A.
Published: (2009)
by: Deshpande, Aditya A.
Published: (2009)
Mechanical modeling of thermal barrier coatings at high temperatures
by: Hermosilla, Unai
Published: (2008)
by: Hermosilla, Unai
Published: (2008)
Fluid-structure interaction study of gas turbine blade vibrations
by: Forbes, Gareth, et al.
Published: (2011)
by: Forbes, Gareth, et al.
Published: (2011)
In-situ and real-time tests on the damage evolution and fracture of thermal barrier coatings under tension: a coupled acoustic emission and digital image correlation method
by: Zhou, M., et al.
Published: (2014)
by: Zhou, M., et al.
Published: (2014)
Gas turbine blade natural frequency measurement using external casing vibrations
by: Ratz, Johannes, et al.
Published: (2013)
by: Ratz, Johannes, et al.
Published: (2013)
Film cooling of gas turbine blades
by: Foster, N.W.
Published: (1976)
by: Foster, N.W.
Published: (1976)
Fluid-structure interaction study of gas turbine blade vibrations
by: Forbes, Gareth, et al.
Published: (2010)
by: Forbes, Gareth, et al.
Published: (2010)
Optimization of stiffened panel fatigue life by using finite element analysis
by: Mazlan, Shahan
Published: (2020)
by: Mazlan, Shahan
Published: (2020)
Fatigue life assessment of thermal cracked dies and moulds for remanufacturing
by: Chen, Changrong
Published: (2016)
by: Chen, Changrong
Published: (2016)
Experimental and numerical investigation on gas turbine blade with the application of thermal barrier coatings
by: Aabid, Abdul, et al.
Published: (2019)
by: Aabid, Abdul, et al.
Published: (2019)
Control system of permanent magnet generator using compactrio for SHRE turbine
by: Che Soh, Azimi
Published: (2018)
by: Che Soh, Azimi
Published: (2018)
Unified viscoplasticity modelling and its application to fatigue-creep behaviour of gas turbine rotor
by: Benaarbia, Adil, et al.
Published: (2018)
by: Benaarbia, Adil, et al.
Published: (2018)
Preparation and thermal properties of fire resistant metakaolin-based geopolymer-type coatings
by: Temuujin, Jadambaa, et al.
Published: (2011)
by: Temuujin, Jadambaa, et al.
Published: (2011)
Design and evaluation of icephobic coatings for efficient thermal de-icing
by: Brierley, Jack
Published: (2025)
by: Brierley, Jack
Published: (2025)
Determination of defects and damage modes in kenaf-reinforced epoxy composites under fatigue loading using thermal imaging and SEM techniques
by: Mat Jusoh, Suriani
Published: (2012)
by: Mat Jusoh, Suriani
Published: (2012)
Digital image correlation approach to cracking and decohesion in a brittle coating/ductile substrate system
by: Wu, D.J., et al.
Published: (2011)
by: Wu, D.J., et al.
Published: (2011)
Structural, optical and thermal properties of as-prepared and annealed gold-coated porous silicon
by: Behzad, Kasra
Published: (2012)
by: Behzad, Kasra
Published: (2012)