The effect of organic and inorganic fibres on the mechanical and thermal properties of aluminate activated geopolymers

QR Code

The effect of organic and inorganic fibres on the mechanical and thermal properties of aluminate activated geopolymers

The addition of fibres to a brittle matrix is a well-known method to improve the flexural strength. However, the success of the reinforcements is dependent on the interaction between the fibre and the matrix. This paper presents the mechanical and microstructural properties of PVA and basalt fibre r...

Full description

Bibliographic Details
Main Authors:	Masi, G., Rickard, W., Bignozzi, M., Van Riessen, Arie
Format:	Journal Article
Published:	Elsevier Ltd 2015
Online Access:	http://hdl.handle.net/20.500.11937/16068

Similar Items

Thermal properties of geopolymers
by: Van Riessen, Arie, et al.
Published: (2009)

A comparison between different foaming methods for the synthesis of light weight geopolymers
by: Masi, G., et al.
Published: (2014)

Thermal properties of spray-coated geopolymer-type compositions
by: Temuujin, Jadambaa, et al.
Published: (2012)

The effect of pre-treatment on the thermal performance of fly ash geopolymers
by: Rickard, William, et al.
Published: (2013)

Performance of fibre reinforced, low density metakaolin geopolymers under simulated fire conditions
by: Rickard, William, et al.
Published: (2013)

Fire-Resistant Geopolymers
by: Vickers, L., et al.
Published: (2014)

Thermally induced microstructural changes in fly ash geopolymers: Experimental results and proposed model
by: Rickard, William, et al.
Published: (2015)

Thermal analysis of geopolymer pastes synthesised from five fly ashes of variable composition
by: Rickard, William, et al.
Published: (2012)

Preparation and thermal properties of fire resistant metakaolin-based geopolymer-type coatings
by: Temuujin, Jadambaa, et al.
Published: (2011)

Methods for geopolymer formulation development and microstructural analysis
by: Van Riessen, Arie, et al.
Published: (2017)

Effect of mechanical activation of fly ash on the properties of geopolymer cured at ambient temperature
by: Jadambaa, Temuujin, et al.
Published: (2009)

Thermal Character of Geopolymers Synthesized from Class F Fly Ash Containing High Concentrations of Iron and a-Quartz
by: Rickard, William, et al.
Published: (2010)

Performance of solid and cellular structured fly ash geopolymers exposed to a simulated fire
by: Rickard, William, et al.
Published: (2013)

Development of alkali activated borosilicate inorganic polymers (AABSIP)
by: Williams, Ross, et al.
Published: (2011)

High temperature behaviour of ambient cured alkali-activated materials based on ladle slag
by: Murri, A., et al.
Published: (2013)

Characterization of various fly ashes for preparation of geopolymers with advanced applications
by: Temuujin, J., et al.
Published: (2013)

Preparation of metakaolin based geopolymer coatings on metal substrates as thermal barriers
by: Jadambaa, Temuujin, et al.
Published: (2009)

Influence of calcium compounds on the mechanical properties of fly ash geopolymer pastes
by: Jadambaa, Temuujin, et al.
Published: (2009)

Fly ash based geopolymer thin coatings on metal substrates and its thermal evaluation
by: Temuujin, Jadambaa, et al.
Published: (2010)

Room temperature alkali activation of fly ash: The effect of Na2O/SiO2 ratio
by: Bignozzi, M., et al.
Published: (2014)

Beneficiation of Collie fly ash for synthesis of geopolymer Part 2: Geopolymers
by: Van Riessen, Arie, et al.
Published: (2013)

Effect of fly ash preliminary calcination on the properties of geopolymer
by: Jadambaa, Temuujin, et al.
Published: (2009)

Geopolymers: A green alternative cement binder from industry residue
by: Van Riessen, Arie
Published: (2012)

A Review on Geopolymer Technology for Lunar Base Construction
by: Lee, S., et al.
Published: (2022)

Strategies to control the high temperature shrinkage of fly ash based geopolymers
by: Vickers, Les, et al.
Published: (2014)

Characterisation of various fly ashes from Australia and Mongolia and their utilisation for preparation of Geopolymers with advanced applications
by: Jadambaa, T., et al.
Published: (2012)

Thermal power stations and their application for preparation of geopolymers and zeolitic compounds
by: Temuujin, J., et al.
Published: (2012)

Assessing the suitability of three Australian fly ashes as an aluminosilicate source for geopolymers in high temperature applications
by: Rickard, William, et al.
Published: (2011)

Phosphate adsorption onto thermally dehydrated aluminate cement granules
by: Zha, Z., et al.
Published: (2018)

The first 20 hours of geopolymerization: An in situ WAXS study of flyash-based geopolymers
by: Williams, Ross, et al.
Published: (2016)

Determination of the reactive component if fly ashes for geopolymer production using XRF and XRD
by: Williams, Ross, et al.
Published: (2010)

Bayer-geopolymers: An exploration of synergy between the alumina and geopolymer industries
by: Van Riessen, Arie, et al.
Published: (2013)

Benefits of sealed-curing on compressive strength of fly ash-based geopolymers
by: Lee, S., et al.
Published: (2016)

Beneficiation of Collie fly ash for synthesis of geopolymer: Part 1 – Beneficiation
by: Van Riessen, Arie, et al.
Published: (2013)

Preparation and characterisation of fly ash based geopolymer mortars
by: Temuujin, Jadambaa, et al.
Published: (2010)

Impact of activator type on the immobilisation of lead in fly ash-based geopolymer
by: Lee, S., et al.
Published: (2016)

The development of Bayer derived geopolymers as artificial aggregates
by: Jamieson, Evan, et al.
Published: (2015)

Three-dimensional quantification of pore structure in coal ash-based geopolymer using conventional electron tomography
by: Lee, S., et al.
Published: (2014)

Determining the Reactivity of a Fly Ash for Production of Geopolymer
by: Chen-Tan, Nigel, et al.
Published: (2009)

In situ elevated temperature testing of fly ash based geopolymer composites
by: Vickers, L., et al.
Published: (2016)

Cannot write session to /tmp/vufind_sessions/sess_1sj0btqhkl7fi0ofq7b9gj5pga