Tensile and Compressive Behaviour of Early Age Concrete
Concrete is relatively weak in tension, but this should not mean the tensile capacity should be ignored, it still has an important role to play when considering early age concrete properties, especially when you are considering lifting at an early concrete strength. The more efficient and sophistica...
| Main Author: | |
|---|---|
| Other Authors: | |
| Format: | Conference Paper |
| Published: |
The Concrete Institute of Australia
2011
|
| Subjects: | |
| Online Access: | http://hdl.handle.net/20.500.11937/14342 |
Similar Items
Tensile and compressive behaviour of early age concrete
by: Barraclough, Andrew
Published: (2012)
by: Barraclough, Andrew
Published: (2012)
Early-age tensile strength and calcium hydroxide content of concrete containing low-calcium fly ash
by: Sarker, Prabir
Published: (2013)
by: Sarker, Prabir
Published: (2013)
Early-Age Tensile Strength of Concrete Containing Lowcalcium Fly Ash as Partial Replacement of Cement
by: Sarker, Prabir, et al.
Published: (2011)
by: Sarker, Prabir, et al.
Published: (2011)
Bond strength of reinforcing steel embedded in fly ash-based geopolymer concrete
by: Sarker, Prabir
Published: (2011)
by: Sarker, Prabir
Published: (2011)
Mechanical behavior optimization of chitosan extracted from shrimp shells as a sustainable material for shopping bags
by: D’Angelo, Giacomo, et al.
Published: (2018)
by: D’Angelo, Giacomo, et al.
Published: (2018)
The use of fibre reinforced crushed rocks for the improvement of tensile strength
by: Siripun, Komsun, et al.
Published: (2011)
by: Siripun, Komsun, et al.
Published: (2011)
Mechanical properties of fibre reinforced high volume fly ash concretes
by: Shafaei, Y., et al.
Published: (2015)
by: Shafaei, Y., et al.
Published: (2015)
Group behaviour of Extended HolloBolts (EHBs) in tension
by: Bin Shamsudin, Mohd Fazaulnizam
Published: (2020)
by: Bin Shamsudin, Mohd Fazaulnizam
Published: (2020)
Nondestructive evaluation of corrosion in varying environments using guided waves
by: Sharma, S., et al.
Published: (2013)
by: Sharma, S., et al.
Published: (2013)
Progressive damage analysis of woven composite panels subjected to tensile loading
by: Kamarulazizi, Sulaiman
Published: (2012)
by: Kamarulazizi, Sulaiman
Published: (2012)
Efficacy of Aspergillus fumigatus R6 pectinase in enzymatic retting of kenaf
by: Wong, Li Yin, et al.
Published: (2016)
by: Wong, Li Yin, et al.
Published: (2016)
Theoretical modelling analysis on tensile properties of bioepoxy/clay nanocomposites using epoxidised soybean oils
by: Salam, H., et al.
Published: (2019)
by: Salam, H., et al.
Published: (2019)
Effects of Active Filler Selection on Foamed Bitumen Mixture in Western Australia
by: Huan, Yue, et al.
Published: (2011)
by: Huan, Yue, et al.
Published: (2011)
Experimental evaluation of cohesive and adhesive bond strength and fracture energy of bitumen-aggregate systems
by: Zhang, Jizhe, et al.
Published: (2016)
by: Zhang, Jizhe, et al.
Published: (2016)
Investigating the effect of process parameters on dimensional accuracy and ultimate tensile strength of micro injection moulded micro parts
by: Mani, Mohammad Reza
Published: (2016)
by: Mani, Mohammad Reza
Published: (2016)
Flexural and tensile strengths of unidirectional hybrid epoxy composites reinforced by S-2 glass and T700S carbon fibres
by: Dong, Jonathan, et al.
Published: (2014)
by: Dong, Jonathan, et al.
Published: (2014)
MULTITEXCO - high performance smart multifunctional technical textiles for tensile structures
by: Heyse, P., et al.
Published: (2016)
by: Heyse, P., et al.
Published: (2016)
Properties of Concrete Containing Recycled Fine Aggregate and fly ash
by: Ahmed, Shaikh
Published: (2011)
by: Ahmed, Shaikh
Published: (2011)
Concrete compressive strength development when polyethylene terephthalate partially replaces sand / Muhammad Redza Rosman and Norishahaini Mohamed Ishak
by: Muhammad Redza, Rosman, et al.
Published: (2015)
by: Muhammad Redza, Rosman, et al.
Published: (2015)
Fatigue damage assessment of reinforced concrete beam using acoustic emission technique / Noorsuhada Md Nor
by: Md Nor, Noorsuhada
Published: (2014)
by: Md Nor, Noorsuhada
Published: (2014)
Flexural behaviour of reinforced concrete beams strengthened with textile fine grained mortar / Zalipah Jamellodin
by: Jamellodin, Zalipah
Published: (2020)
by: Jamellodin, Zalipah
Published: (2020)
On the identification of earlywood and latewood radial elastic modulus of Pinus pinaster by digital image correlation: a parametric analysis
by: Pereira, João Luís, et al.
Published: (2018)
by: Pereira, João Luís, et al.
Published: (2018)
Evaluation of fiberglass derived three dimensional geomaterial for problematic soil applications
by: Mujah, Donovan, et al.
Published: (2013)
by: Mujah, Donovan, et al.
Published: (2013)
The application of the small punch tensile test to evaluate the ductile to brittle transition of a thermally sprayed CoNiCrAlY coating
by: Jackson, G.A., et al.
Published: (2017)
by: Jackson, G.A., et al.
Published: (2017)
Digital image correlation approach to cracking and decohesion in a brittle coating/ductile substrate system
by: Wu, D.J., et al.
Published: (2011)
by: Wu, D.J., et al.
Published: (2011)
Flexible and transparent films produced from cellulose nanowhisker reinforced agarose
by: Felfel, Reda M., et al.
Published: (2018)
by: Felfel, Reda M., et al.
Published: (2018)
Influence of slag to the compressive strength of concrete / Tommy Fong@Ramzi Rimmy
by: Rimmy, Tommy Fong@Ramzi
Published: (2005)
by: Rimmy, Tommy Fong@Ramzi
Published: (2005)
The study of wallet foamed concrete under in-plane compression / Hafizi Che Hamzah
by: Che Hamzah, Hafizi
Published: (2007)
by: Che Hamzah, Hafizi
Published: (2007)
Mechanical and wear properties of palm oil fuel ash reinforced aluminum metal matrix composite
by: Ma, H.L., et al.
Published: (2013)
by: Ma, H.L., et al.
Published: (2013)
Oil Palm Fibre and Nano-Silica Reinforced Epoxy Composite Material
by: Samuel, N., et al.
Published: (2014)
by: Samuel, N., et al.
Published: (2014)
The effects of ground granulated blast-furnace slag blending with fly ash and activator content on the workability and strength properties of geopolymer concrete cured at ambient temperature
by: Deb, Partha, et al.
Published: (2014)
by: Deb, Partha, et al.
Published: (2014)
Recycled hybrid fiber-reinforced & cement-stabilized pavement mixtures: tensile properties and cracking characterization
by: Farhan, Ahmed Hilal, et al.
Published: (2018)
by: Farhan, Ahmed Hilal, et al.
Published: (2018)
The behaviour of concrete filled thin hollow steel column under axial load / Greg Alvin V. Thomblon
by: V. Thomblon, Greg Alvin
Published: (2006)
by: V. Thomblon, Greg Alvin
Published: (2006)
Effects of alkaline sulfite anthraquinone and methanol pulping conditions on the mechanical and optical paper properties of bamboo (Gigantochloa scortechinii)
by: Moradbak, Amin, et al.
Published: (2016)
by: Moradbak, Amin, et al.
Published: (2016)
Evaluation of the mechanical properties of recycled glass fibers-derived three dimensional geomaterial for ground improvement
by: Mujah, Donovan, et al.
Published: (2013)
by: Mujah, Donovan, et al.
Published: (2013)
Strength and Hydration Heat of Concrete using Fly Ash as a Partial Replacement of Cement
by: Sarker, Prabir, et al.
Published: (2009)
by: Sarker, Prabir, et al.
Published: (2009)
Influence of surfactant to foamed concrete mix / Nurul Aini Mohamed
by: Mohamed, Nurul Aini
Published: (2006)
by: Mohamed, Nurul Aini
Published: (2006)
Structural behaviour of precast concrete wall frame connections under shear load
by: Rossley, Nabila
Published: (2014)
by: Rossley, Nabila
Published: (2014)
A case study on concrete strength using river water / Za’im Zaimy
by: Zaimy, Za’im
Published: (2017)
by: Zaimy, Za’im
Published: (2017)
Effect of equi-biaxially fabric prestressing on the tensile performance of woven E-glass/polyester reinforced composites
by: Mostafa, Nawras H., et al.
Published: (2016)
by: Mostafa, Nawras H., et al.
Published: (2016)